Iconic Update on Exploration Activity at Bonnie Claire Lithium Project, Nevada
ICONIC MINERALS LTD.
Suite 303, 595 Howe Street
Vancouver, B.C. V6C 2T5
Phone: (604) 336-8614 Fax: (604) 718-2808
www.iconicmineralsltd.com
NEWS RELEASE
Iconic Update on Exploration Activity at Bonnie Claire Lithium Project, Nevada
(September 4, 2018) – Iconic Minerals Ltd. (“Company” or “Iconic”) (TSX-V: ICM) (OTC:
BVTEF) (FSE: YQGB) has hosted a field inspection by Global Resource Engineering of Denver,
Colorado who are conducting a NI 43-101 compliant resource study of the Bonnie Claire Project
(“Project” or “Bonnie Claire”). Bulk samples of the sediments from BC1801 have been collected
as the hole was drilled and shipped to St-Georges Eco-Mining Corp (“St-George”) of Montreal for
further metallurgical testing. Additional shallow drilling will soon be conducted to find shallow
lithium-rich sediments for further bulk testing using heavy equipment.
Global Resource Engineering (“GRE”) visit to Bonnie Claire, which commenced on August 24th ,
toured the greater property area, inspected drill sites and surface sample locations, checked drill
logs against chip trays , as well as taking samples of both surface salts and drilled sediments to
check against the results. GRE is primarily using the three deep drill holes, BC1601, BC1602 and
BC1801, that were drilled on the Project, to calculate a resource estimate on Bonnie Claire. The
drill holes, located 1.6 kilometers (1.0 miles) to 2.4 kilometers (1.5 miles) apart, each contain +300
meters (+1,000 feet) of sediments with an overall average grade greater than 1,000 ppm lithium.
GRE also visited the area south of the Project’s drill holes and studied a broad region of linear
surface lithium highs found by surface grid salt sampling. This area, along with one shallow drill
hole (“BC1701”) completed in 2017, has potential for near -surface lithium -rich sediments and
possible lithium brine. An NI 43-101 resource report can be expected to be completed by GRE in
3-5 weeks.
Bulk samples of the sediments taken from the third deep hole ( “BC1801”), have been shipped to
St-Georges in Montreal for further metallurgical testing. This work will be used to determine the
optimal economically feasible method of recovering lithium , and additional commercially viable
elements derived from the Bonnie Claire sediments. Results from St-Georges tests are estimated
for completion within five weeks.
Final exploration plans are being formulated for five 90 meters (300 feet) deep drill holes to test
shallow lithium-rich sediments under linear surface lithium highs at Bonnie Claire. If successful,
the area will become a source for further bulk sampl ing for pilot plant studies , requiring large
amounts of sediment. In addition to the ongoing metallurgical work and shallow drilling the longer-
term plan is to drill one deep core hole up to 1,200 meters (4,000 feet) deep to determine the vertical
extent of the lithium-rich sediments. After the core hole is drilled , ten to fifteen deep mud-rotary
holes, spaced roughly 1.6 km (1.0 miles) apart, are planned to greatly expand the soon to be reported
resource.
The Bonnie Claire Lithium Property Characteristics:
The Property is located within Sarcobatus Valley that is approximately 30 km (19 miles) long and
20 km (12 miles) wide, the associated drainage basin is larger than the drainage basin at Clayton
Valley to the north. Quartz-rich volcanic tuffs, that contain anomalous amounts of lithium, occur
within and adjacent to the valley. Geochemical analysis of the local salt flats has yielded lithium
values up to 340 ppm. The gravity low within the valley is 20 km (12 miles) long, and the current
estimates of depth to basement rocks range from 600 to 1,200 meters (2,000 to 4,000 feet). The
2
current claim block covers an area of 35 km 2 (13.5 mi 2) with potential to be underlain by
lithium-rich sediments.
Richard Kern, Certified Professional Geologist (#11494) and CEO of Iconic is the Qualified Person
who has prepared and reviewed this press release in accordance with NI 43-101 reporting standards.
On behalf of the Board of Directors
SIGNED: “Richard Kern”
Richard Kern, President and CEO
Contact: Keturah Nathe, VP Corporate Development (604) 336-8614
For further information on ICM, please visit our website at www.iconicmineralsltd.com. The Company’s
public documents may be accessed at www.sedar.com
Forward Statement: This news release includes certain forward-looking statements or information. All statements
other than statements of historical fact included in this release are forward-looking statements that involve various
risks and uncertainties. There can be no assurance that such statements will prove to be accurate and actual results
and future events could differ materially from those anticipated in such statements. Iconic expressly disclaims any
intention or obligation to update or revise any forward-looking statements whether as a result of new information,
future events or otherwise except as otherwise required by applicable securities legislation.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of
the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.