Prospects Update
Hayasa Metals Announces 39m @ 0.50% Cu
from Late Season Drill Hole at Urasar;
Prospects Update
Vancouver, British Columbia--(Newsfile Corp. - April 2, 2026) - Hayasa Metals Inc. (TSXV: HAY)
(OTCQB: HAYAF) ("
Hayasa
" or the "
Company
") has received the final drill hole results from last
season's exploration program and is pleased to announce 39m of 0.50% Cu and 0.19 g/t Au from 11m
to 50m, and 52m of 0.11% Cu from 163m to 215m depth, from hole UDD-021.
This hole was drilled due
south at an inclination of -60° at Oxide Basin at the western end of the Urasar exploration permit, as
shown in Figures 1 and 2 below.
As announced in the Company's news release on November 12, 2025, a proposed late-season, 500-
meter diamond drill hole (UDD-021) was collared in November in the Oxide Basin area, targeting a low
resistivity AMT anomaly. Drilling encountered complications at 235m due to intensely broken ground,
and with the imminent onset of significant winter snowfall, led to the abandonment of hole UDD-021
before reaching its target depth.
The target anomaly is projected to occur at a depth of approximately
250m to 400m, shown in Figure 2.
Based on the encouraging copper geochemical results, and the need to flesh out the Audio Magneto
Telluric (AMT) survey before additional drilling, an expanded AMT survey
has been scheduled for April.
The previous 3-line survey carried out in August last year, was a trial survey, which indicated that low
resistivity/high conductivity responses may correlate with mineralized zones, shown in Figures 1 and 2.
Subject to favorable spring snowmelt and road conditions, up to two additional drill holes are planned for
Q2 2026 within the priority 1 zone shown in Figures 1 and 3 below.
Figure 1. Priority 1 zone, close up
Figure 2. AMT Profile 2 of Target Zone
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/3169/290951_hayasa1.jpg
Figure 3: Urasar Map Identifying Priority Zone 1, 2 and 3
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/3169/290951_ca2ca1b804ad2b63_004full.jpg
Joel Sutherland, CEO of Hayasa, comments:
"This late season drill hole confirms that what we see at
surface is an indication of subsurface mineralization.
We expect to derive more information from the
upcoming AMT survey in April which will help in refining drill targets for the spring program.
This
particular hole has excellent indications of near surface copper mineralization.
Figure 4 below shows
the core at 188m."
Figure 4. Finely disseminated pyrite, chalcopyrite (oxidized) at 188m grading 0.46% Cu
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/3169/290951_hayasa2.jpg
The company intends to communicate its 2026 Urasar Drill Hole plan after it completes a more robust
AMT survey, commencing in April, that contemplates 6 lines shown in Figure 5.
This work will be
completed in the first half of Q2, and we expect to drill in May.
Figure 5. Planned AMT (Audio Magento Telluric) geophysical lines
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/3169/290951_ca2ca1b804ad2b63_007full.jpg
Laboratory and QA/QC details
The samples were prepared and analyzed by ALS Laboratory in Roșia Montană, Alba County, Romania.
Gold content was determined by 30 g fire assay with an atomic absorption spectroscopy (AAS) finish
(Au-AA23). Multi-element analysis was conducted using the ME-MS61r method, consisting of a near-
total four-acid digestion followed by ICP-MS analysis, providing determination of 61 elements, including
rare earth elements (REE). A quality assurance/quality control (QA/QC) program includes the insertion of
certified reference materials (standards), blanks, and duplicates every twenty samples.
New Projects
Hayasa Metals is in the process of applying for three new additional exploration permits within Armenia
as discussed in the news release dated February 5, 2026.
The first and most critical step in the license
application process in Armenia involves public consultations with local villages in the proposed work
area.
We are pleased to report that the public meeting for a license application in the north of the
country, where polymetallic antimony-nickel-cobalt mineralization has been historically worked, was
successfully approved our proposal in March.
The subsequent environmental and proposed budget
reports will be submitted to the government in early April.
Two other projects in the center of Armenia have public meetings scheduled for the third and fourth
weeks in April.
The first is a 2 km x 500 m copper-silver anomaly generated by the Hayasa team,
hereafter called "Hovo's Reward."
The second is a large altered zone hosting high sulfidation Cu-Au
surface anomalies, hereafter called: "Mount Stephanie." More information on these projects will be
shared over the coming months.
Chairman remarks
Dennis Moore, Chairman and President of Hayasa, commented: "
Management is pleasantly surprised
by the recent drilling results from Hole UDD-021. Broad intervals of up to 52 meters of copper
mineralization were not identified during initial logging, due to strong oxidation effects, particularly in
the upper (11-50m depth) zone.
These encouraging intersections represent the first continuously
mineralized intervals drilled by Hayasa at Urasar and highlight a copper-enriched zone in the Oxide
Basin area that warrants further drilling.
These results reinforce our confidence in Urasar and indicate that our exploration efforts are
advancing in the right direction.
Extensive alteration and widespread surface sulfide occurrences across the license area-what we refer
to as "smoke"-point to the potential for one or more concealed ore bodies along this highly
prospective structural corridor. With a demonstrated 15km geochemical footprint, we believe
disciplined scientific work and systematic drilling, positions us to unlock meaningful value at Urasar."
Moore continues, "Additionally, our status as a first mover in Armenia is beginning to emerge through
our new license applications. Over the past several months, we have laid the groundwork for these
applications by conducting site visits, engaging with local stakeholders, and completing thorough due
diligence.
Two of these prospects are located along the primary mineralized trend that runs south to north
through the south-central region of the country, an area that hosts several operating mines.
Meanwhile, the polymetallic antimony-nickel-cobalt mineralization
project in the North exhibits
significant visible antimony mineralization at surface across economically meaningful widths.
These are highly promising projects, each with the potential to develop into a flagship property."
Qualified Person
The disclosure of the exploration information contained in this news release was reviewed and approved
by Dennis Moore, Hayasa's President and Chairman, a qualified person as defined by National
Instrument 43-101.
On behalf of the Board of Directors,
Joel Sutherland
CEO
Hayasa Metals Inc.
For further information, contact:
www.hayasametals.com
https://twitter.com/Hayasametals
604-676-5664
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this
release.
Forward-looking statements
This news release contains forward-looking statements. All statements other than statements of
historical fact included in this news release are forward-looking statements that involve risks and
uncertainties. There can be no assurance that such statements will prove to be accurate and actual
results and future events could differ materially from those anticipated in such statements including,
without limitation, statements regarding future exploration programs. Important factors that could
cause actual results to differ materially from the Company's expectations including the risks detailed
from time to time in the filings made by the Company with securities regulators. The reader is
cautioned not to place undue reliance on any forward-looking information. Forward-looking statements
contained in this news release are expressly qualified by this cautionary statement. The forward-
looking statements contained in this news release are made as of the date of this news release and
the Company will update or revise publicly any of the included forward-looking statements only as
expressly required by Canadian securities law.
To view the source version of this press release, please visit
https://www.newsfilecorp.com/release/290951