Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

GSKR.V ·

Barsele drill hole SKI16002 yields 13.0 meters grading 2.15 g/t gold extending Skiråsen mineralization an added 100 meters vertically to 695 meters depth, with the gold mineralized system remaining open down plunge to the southeast.

Drill Results

May 9, 2017

Barsele drill hole SKI16002 yields 13.0 meters grading 2.15 g/t gold extending Skiråsen

mineralization an added 100 meters vertically to 695 meters depth, with the gold

mineralized system remaining open down plunge to the southeast.

Operational Update for the Barsele Au-VMS Project

Vancouver, BC – Barsele Minerals Corp. – (TSX-V: BME) (“Barsele”) is pleased to report a twelfth operational progress

update for the ongoing exploration program within the Barsele Au -VMS Project area in Västerbottens Län, northern

Sweden. The exploration program is being operated by joint venture partner Agnico Eagle Mines Limited – (TSX, NYSE:

AEM) (“ Agnico Eagle ”). Ownership in the project is 55 % Agnico Eagle and 45% Barsele . Agnico Eagle can earn an

additional 15% in the Barsele Project through the completion of a pre-feasibility study.

During the month of March , three diamond drilling machines were focused on expansion drilling between the Central

and Avan zones. Planning toward future testing (commencing May) of selected volcanogenic massive sulphide (VMS)

targets, including extension drilling of the Norra Zone was completed. A total of 147 out of 500 planned base of till (BOT)

holes were completed by month end. There are plans to mobilize a f ourth drill in May, with the fifth machine expected

to arrive in early June.

Highlight infill hole SKI17004 yielded seven significant intercepts , including 13.1 meters core length (estimated 7.0

meters true thickness) grading 3.12 g/t gold uncut (2.75 g/t gold cut) at a midpoint depth of 255 meters below surface,

plus 21.0 meters core length (estimated 12.0 meters true thickness) grading 2.65 g/t gold at a midpoint depth of 405

meters below surface . Hole SKI17005 yielded nine significant intercepts with a best hit of 23.0 meters core length

(estimated 17.0 meters true thickness) grading 1.85 g/t gold at a midpoint depth of 390 meters below surface. Hole

SKI17006 yielded a best hit of 4.45 meters core length (estimated 3.2 meters true thickness) grading 5.86 g/t gold at a

midpoint depth of 265 meters below surface, while SKI17007 yielded a high -grade interval of 1.1 meters core length

(estimated 0.5 meters true thickness) grading 101.70 g/t gold uncut (11.42 g/t gold cut) at a depth of 260 meters below

surface.

Five holes were completed during the mo nth of March of which three were expansion and two were infill. During the

month, 3,601 meters were drilled and there were 2,565 samples sent for analysis, with 2,312 assay results received.

Barsele’s President, Gary Cope states, “Hole SKI16002 was re -entered and extended and has delivered the deepest

vertical gold hit of 695 meters vertically below surface. T he entire mineralized system remains open along strike and at

depth. We look forward to a total of five drills coring by early June.”

February 2017 Drilling Update

Hole ID Easting Northing Az Dip DDH

Length

From

(m)

To

(m)

CL

(m)

TL

(m)

Au

(g/t)

Top

Cut

(g/t)

SKI16002 619249.98 7214410.81 40 -55 899.30 857.0 882.0 25.0 13.0 2.15

Expansion Extended

SKI17004 619221.00 7214516.00 360 -62 645.40 246.08 248.0 1.92 1.0 24.87 6.45

Infill 293.0 306.1 13.1 7.0 3.12 2.75

320.0 344.0 24.0 13.0 1.10

403.0 426.0 23.0 12.8 2.07

434.0 446.0 12.0 6.7 1.40

470.0 491.0 21.0 12.0 2.65

496.0 528.0 32.0 18.4 1.47

assays pending

SKI17005 619177.99 7214515.28 006 -61 595.40 307.0 313.0 6.0 3.0 2.12

Infill 346.0 351.0 5.0 2.5 3.80

410.0 413.0 3.0 1.5 11.98 8.31

434.0 457.0 23.0 17.0 1.85

469.0 487.0 18.0 9.0 2.04

498.0 504.0 6.0 3.0 2.69

510.0 519.0 9.0 5.0 1.53

543.0 559.0 16.0 8.2 1.91

572.0 586.0 14.0 7.3 1.20

SKI17006 619034.98 7214539.45 360 -45 583.60 257.0 272.0 15.0 10.6 2.08

Infill 374.0 378.45 4.45 3.2 5.86

468.0 477.0 9.0 6.5 2.75

SKI17007 619127.10 7214524.20 002 -43 483.80 326.0 340.75 14.75 11.2 1.04

Infill 386.9 388.0 1.10 0.5 101.7 11.42

Az = Compass Bearing Dip = Degrees Inclination CL = Core Length TL = True Length Top Cut to 20 g/t gold

This technical information in this release was verified by way of a site visit in April , 2017 by the Qualified Person , where

the data was discussed with the site operator, th e database was reviewed, and drill core was examined. The quality

control/quality assurance program at the Barsele project is described on our website at

http://barseleminerals.com/s/QAQCProcedures-Barsele.asp.

All samples referred to in this table were tested at independent ALS Laboratories in Romania and Ireland, using ultra

trace level method (ME -MS61)-48 element by using four acid digestion together with ICP -AES and ICP -MS analytical

methods. Gold is tested by fire assay, aqua regia digest and analysed with an atomic absorp tion spectroscopy (AAS) or

gravimetric finish depending on grade (Au -AA24 and Au-GRA22). Each method has a lower and upper calibration range

for which results are accurately determined.

As project operator, Agnico Eagle has developed a community relations program to engage the various stakeholders i n

the project area. Basic environmental assessment and surface water characterization, species studies and hydrogeology

studies are ongoing.

About the Barsele Gold Project

The Barsele Project is located on the western end of the Proterozoic “Skellefte Trend”, a prolific volcanogenic massive

sulphide deposi ts belt, where it inte rsects with the “Gold Line” in N orthern Sweden. Both polymetallic deposits and

intrusive hosted orogenic gold deposits are present in this region and on the property. Current and past producers in the

region include Boliden, Kristineberg, Bjorkdal, Svartliden and Storliden.

The intrusive hosted gold mineralization within the Barsele Property appears to be similar to Agnico Eagle’s Goldex

deposit in Quebec. Drilling has been focused on verifying, defining and expanding the mineral resources within and

along the Central, Avan and Skiråsen zones, that are now interpreted to be part of the same m ineralized system that

extends approximately 3.0 kilometers in strike length and to a dept h of 700 meters and still open in all directions. These

contiguous mineralized zones occur within a granodiorite host that ranges in width from 200 to 500 meters and is

traceable over a strike length exceeding 8.0 kilometers. Gold is generally associated with arsenopyrite and low base

metal content, but also occurs as native metal locally.

Art Freeze, P.Geo. is the Qualified Person as defined in NI 43 -101 and takes responsibility for the technical disclosure

contained within this news release.

About Barsele Minerals Corp.

Barsele is a Canadian -based junior exploration company comprised of highly qualified mining professionals. Barsele’s

main property is the Barsele Gold Project in Västerbottens Län, Sweden, a joint venture with Agnico Eagle. The company

has retained the services of Amec Foster Wheeler to complete an Independent Review of the Barsele Mineral Resource

Update that was recently created by Agnico Eagle. An updated NI 43-101 Technical Report will be prepared by Barsele if

warranted.

ON BEHALF OF THE BOARD OF DIRECTORS

Gary Cope

President

For further information, please contact Barsele Minerals Corp. at (604) 687-8566 x227, email [email protected]

or visit our website at www.barseleminerals.com

This News Release may contain forward-looking statements including but not limited to comments regarding the timing and content of

upcoming work programs, geological interpretations, receipt of property titles, potential mineral recovery processes, etc. Forward-looking

statements address future events and conditions and therefore involve inherent risks and uncertainties. Actual results may differ materially

from those currently anticipated in such statements and Barsele undertakes no obligation to update such statements, except as required by law.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts

responsibility for the adequacy or accuracy of this release