Grid Metals Reports Final Assays from its 2025 Drill Program at Falcon West Including 20.45% Cs20 over 3.3m; Announces Participation at PDAC
Grid Metals Reports Final Assays from its 2025 Drill Program at Falcon
West Including 20.45% Cs20 over 3.3m; Announces Participation at
PDAC
February 27, 2026 TORONTO -- Grid Metals Corp. (TSXV: GRDM; OTCQB: MSMGF) ("Grid" or
the "Company") is pleased to report the final drill results from its Phase 1 cesium -focused drill
program at the 100% owned Falcon West cesium property (the “Property”). Drilling at the Lucy
South cesium target has outlined a highly fractionated lithium/cesium/tantalum enriched (“LCT”)
pegmatite with the cesium largely contained in pollucite and lithium largely contained in coarse
grained spodumene.
In addition, Grid would like to cordially invite its shareholders and other stakeholders to visit us
at Booth #2122 in the Investors Exchange Exhibition Room at the Prospectors and Developers
Association of Canada (PDAC) Convention. PDAC, regarded as one of the world's premier
resources conferences, will run from Sunday, March 1, 2026 until Wednesday, March 4, 2026 at
the Metro Toronto Convention Centre in Toronto, Ontario. Robin Dunbar, President & CEO, will
be presenting during the Electric Materials Session on Tuesday, March 3 at 12:17 pm ET in Room
801B.
Drilling Highlights
• The best cesium intercept drilled at the Property to date was returned in hole LU25-51 of
3.35 m grading 20.45% Cs2O including 2.35 m with 28.4% Cs2O. Other highlights from the
current batch of reported holes are shown in Table 1.
• Cesium is concentrated in pollucite-bearing subzones within a Cs- + Li-enriched core zone
of the Lucy South LCT pegmatite. The core zone has been extensively drilled across an
area of ~120m x 40-50m in which the average vertical depth to the top of the zone ranges
from 15-25 metres.
• The Lucy South core zone remains open in multiple directions. There are indications that
the overall extent of the host LCT pegmatite could be larger than the immediate detailed
drilling area based on magnetic survey data, historical drill hole information and bedrock
and vegetation geochemical survey results.
• The pollucite mineralization shows variable lateral connectivity but is most continuous in
a flat-lying part of the up-dip, near-surface portion of the Lucy South pegmatite.
• The Company is currently attempting to expand the known cesium mineralization in the
immediate target area with a Phase 2 drill program that commenced in late January 2026.
It expects to commence work on an initial cesium resource estimate for Lucy South
immediately following receipt of all assays from the Phase 2 program.
A total of 28 holes are reported in this release such that all 67 holes (3,035 metres) have now
been reported from the Phase 1 cesium -focused drill program at Lucy South. Significant results
include both cesium -rich and lithium -rich intersections hosted by the highly fractionated core
zone of the host Lucy South pegmatite. All of the reported drillholes in the program have
intercepted Lucy South at no greater than 50m vertical depth. The majority of cesium intercepts
have occurred at a down hole depth of less than 30 meters.
In late January, the Company commenced a Phase 2 program at Lucy South that will include
approximately an additional 60 drill holes focused on remaining gaps around the currently
defined Cs-rich portion of the pegmatite.
Figure 1: Map of Lucy South target area with interpreted pierce points into the top of the flat -
lying Lucy South LCT pegmatite projected to surface for holes LU25 -40 to LU25-67 and previous
holes completed in this area. Background image is based on a recent government LIDAR survey.
Table 1: Selected Length-Weighted Cesium Interval Assays from Drill Holes LU25-40 to LU25-67,
Lucy South Phase 1 Drilling Program. See Appendix 1 for complete results and Appendix 2 for
hole locations. Note the true thickness for each interval r eported is estimated to represent
between 80% and 100% of the reported interval lengths.
Hole ID
From
(m)
To
(m)
Length
(m)
Cs2O
(%)
Li2O
(%)
Rb2O
(%)
Ta2O5
(ppm)
LU25-43 23.35 24.25 0.90 3.26 1.51 0.23 290
LU25-50 18.90 24.20 5.30 2.78 0.83 0.53 230
inc. 19.50 22.00 2.50 5.73 1.12 0.53 287
LU25-51 22.00 31.10 9.10 7.71 1.15 0.40 74.7
inc. 24.05 27.40 3.35 20.45 0.38 0.72 -
with 24.05 26.40 2.35 28.39 0.49 0.95 -
LU25-52 23.20 25.20 2.00 4.14 0.85 1.43 133
inc. 24.50 25.20 0.70 9.58 1.81 0.36 203
LU25-59 23.60 30.35 6.75 2.00 2.57 0.23 361
inc. 27.00 29.00 2.00 6.36 2.71 0.18 956
with 28.55 29.00 0.45 16.46 0.41 0.49 35.6
LU25-66 22.80 24.00 1.20 2.94 1.07 0.75 20.0
LU25-67 26.70 31.10 4.40 1.68 0.96 0.14 61.1
Inc. 29.35 31.10 1.75 2.76 0.72 0.23 12.7
Cesium Results
Drill hole logging, quantitative mineralogical analyses and whole-rock geochemical data confirm
that pollucite is the dominant cesium-bearing mineral in the Cs-rich portion of the Lucy South LCT
pegmatite. Pollucite is present in abundances ranging from <1% to >80% over true thicknesses
of <0.1 metres to ~4 metres. It is typically concentrated in one to three discrete intervals within
a several metre-thick, quartz -, pollucite - and spodumene-rich core zone in the Lucy South
pegmatite. The Company has submitted a number of samples with low, medium and high cesium
grades for additional, quantitative mineralogical analysis to better characterize the distribution
of pollucite in the pegmatite. Pollucite has historically been the mineral of choice for cesium
extraction given its high cesium content, which is typically ~32% Cs2O.
Lithium Results
A majority of the drillholes completed during the program intersected one or more <1 metre- to
several metre-thick sections containing coarse grained spodumene that typically have average
Li2O grades in the range 1 – 3% and locally reaching 6% (Appendix 1). The spodumene -rich
intervals are commonly intercalated with pollucite -rich sections in the core zone of the Lucy
South pegmatite. The observed mineralogical zonation is indicative of a highly-fractionated LCT
pegmatite system.
Lucy South Overview
• The Lucy South pegmatite is a highly fractionated, rare-metal enriched LCT pegmatite.
These type s of pegmatite s, featuring percentage level grades of both cesium
(associated with pollucite) and lithium (associated with spodumene) are extremely
rare, globally. Global cesium production historically has occurred from only three LCT
pegmatite bodies.
• The minimum strike length of the Cs -rich portion of the Lucy South pegmatite is 120
metres and the average width ranges from several metres to ~50 metres. The Cs-rich
area remains open in multiple directions.
• The pollucite mineralization is interpreted to have formed during the last stages of
crystallization of the host Lucy South pegmatite, post -dating the spodumene -rich
mineralization and forming discrete pockets of Cs-rich pegmatite within the core zone.
• A Phase 2 drill program targeting the most obvious r emaining gaps in the immediate
vicinity of the currently drill -defined Cs -rich portion of the Lucy South pegmatite
commenced in late January and is expected to include ~3,000 metres of drilling. The
program will also include some larger step -out holes to help better understand the
mineralogy, geometry and size potential of the Lucy LCT pegmatites.
• The Lucy South LCT pegmatite has an uncertain relationship to the Lucy North LCT
pegmatite (Figure 2). Both pegmatites host spodumene and pollucite mineralization
associated with a Li -Cs-enriched core zone averaging 5 metres in true thickness and
encompassed by finer-grained wall zones. Both pegmatites have an easterly strike and
dip gently to moderately to the southeast. Current drilling data suggest both may be
part of the same highly -fractionated LCT pegmatite system, either as discrete sub -
parallel sheets or as a structurally disrupted single pegmatite intrusion. On a similar
note, an outcropping area of similar LCT pegmatite occurs ~1 km to the west of the
Lucy pegmatite at the Artdon occurrence. There is no drilling between the two areas,
which are connected by a strong magnetic low anomaly that underlies both the Lucy
South and Lucy North pegmatites.
• The scarcity of near-term supply makes defining a resource in a stable western
jurisdiction like Canada a unique opportunity. Grid expects to complete enough drilling
by the end of the Phase 2 program to support an initial cesium resource estimate that
it hopes to announce near the start of the third quarter of this year.
Figure 2: Map of Current Drill-Defined Extent of the Lucy LCT Pegmatite(s). Wireframes based
on both the average Cs 2O grade and on LCT pegmatite intersections are shown in red and pink,
respectively. The LCT pegmatite has the potential to extend along strike to both the east and
west, downdip to the southeast, and downplunge to the south.
Figure 3: Drill hole LU25-51 showing core zone of pegmatite (in white) surrounded by host rock.
Core grades of 3.35 m with 20.45% Cs2O (from 22.0 m) including 2.35 m with 28.4% Cs2O.
About Cesium and the Cesium Market
Cesium is defined as a critical metal by both Canada and the U.S. It has growing uses in high
technology and important industrial applications. There is currently believed to be a s ignificant
shortage of cesium feedstock globally.
Quality Assurance and Quality Control
The Company’s ongoing exploration program at the Falcon West lithium property is being
supervised by Dave Peck, P.Geo. Grid Metals applies best practice quality assurance and quality
control ("QAQC") protocols on all of its exploration programs. For the current program , all core
was logged and sampled at the Company’s core facility located on its Makwa nickel property.
Generally, 1.0 metre sample lengths were used. Samples were bagged and tagged and then
transported by secure carrier to the Activation Laboratories facility in Ancaster, Ontario for
sample preparation and analysis for lithium, cesium, rubidium, tantalum and selected major and
trace element abundances using a sodium peroxide fusion total digestion method followed by
ICP-OES and ICP-MS analysis. The Company is using two rare metal certified reference materials
("CRMs") and an analytical blank for the program to monitor analytical accuracy and check for
cross contamination between samples. The blank and CRM results for the reported intervals
were determined to fall within the accepted range of deviation from the certified values. A check
assay program using a similar sodium peroxide fusion digestion method has recently been
initiated with check samples being analyzed at AGAT laboratories in Thunder Bay, Ontario.
Dr. Dave Peck, P.Geo., the Company’s Vice President, Exploration, has reviewed and approved
the technical information contained in this release.
About Grid Metals Corp.
Grid Metals provides a focused cesium opportunity at its 100% -owned Falcon West cesium
project with upside optionality at its other mineral projects in southeastern Manitoba:
1) The Falcon West Property (Li -Cs) is located 110 km east of Winnipeg along the Trans -
Canada highway and contains highly anomalous cesium and lithium values in LCT
pegmatite including the Lucy South pegmatite dyke, the focus of Grid’s current
exploration efforts.
2) The Makwa Property (Ni -Cu-PGM-Co), which is subject to an Option and Joint Venture
Agreement with Teck Resources Limited (“Teck”) . Teck can earn up to a 70% interest in
Makwa by incurring a total of CAD$17.3 million, comprising project expenditures
(CAD$15.7 million) and cash payments or equity participation (CAD$1.6 million) with Grid.
Makwa is located on the south arm of the Bird River Greenstone Belt.
3) The Mayville Property (Cu-Ni) is located on the north arm of the Bird River Greenstone
Belt. The property is owned subject to a minority interest. The project contains a NI 43 -
101 compliant open pit resource of 32 million tonnes grading 0.61% CuEq.
4) The Donner Property (Li-Cs) is adjacent to the Mayville Property, and Grid owns 75% of
the project. The project contains a NI 43-101 compliant resource of 6.8 million tonnes
grading 1.39% Li2O.
All of the Company’s southeastern Manitoba projects are located on the ancestral lands of the
Sagkeeng First Nation with whom the Company maintains an Exploration Agreement.
On Behalf of the Board of Grid Metals Corp.
For more information about the Company, please visit our website at www.gridmetalscorp.com
or contact:
Robin Dunbar – President, CEO & Director – [email protected]
Brandon Smith – Chief Development Officer – [email protected]
David Black – Investor Relations – [email protected]
CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS
We seek safe harbour. This news release contains forward -looking statements within the meaning of the
United States Private Securities Litigation Reform Act of 1995 and forward-looking information within the
meaning of the Securities Act (Ontario) (togethe r, "forward-looking statements"). Such forward -looking
statements include the Company’s intended use of proceeds and receipt of regulatory approvals , th e
overall economic potential of its properties, the availability of adequate financing and involve known and
unknown risks, uncertainties and other factors which may cause the actual results, performance or
achievements expressed or implied by such forward -looking statements to be materially different. Such
factors include, among others, risks and uncertainties relating to potential political risk, uncertainty of
production and capital costs estimates and the potential for unexpected costs and expenses, physical risks
inherent in mining operations, metallurgical risk, currency fluctuations, fluctuations in the price of nickel,
cobalt, copper and other metals, completion of economic evaluations, changes in project parameters as
plans continue to be refined, the inability or failure to obtain adequate financing on a timely basis, and
other risks and uncertainties, including those described in the Company's Management Discussion and
Analysis for the most recent financial period and Material Change Reports filed with the Canadian
Securities Administrators and available at www.sedarplus.ca.
Neither the TSX Venture Exchange nor its Regulations Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this press
release.
Appendix 1: Drilling results for holes LU25 -40 to LU25 -67, Lucy South Phase 1 drill program. Collar
coordinates are based on the NAD 83 datum and the UTM Zone 15N projection.
Hole ID
From
(m)
To
(m)
Length
(m)
Cs2O
(%)
Li2O
(%)
Rb2O
(%)
Ta2O5
(ppm)
LU25-41 25.00 31.35 6.35 0.19 2.49 0.22 145
inc. 25.90 29.73 3.83 0.23 3.62 0.05 105
with 29.40 29.53 0.13 4.57 3.34 0.17 78
LU25-42 23.90 30.85 6.95 0.21 2.18 0.13 127
inc. 25.05 28.95 3.90 0.05 3.14 0.03 136
with 27.50 28.95 1.45 0.07 4.70 0.02 185
and 29.60 30.85 1.25 0.95 0.95 0.39 70
LU25-43 22.35 28.00 5.65 0.59 0.72 0.34 187
inc. 23.35 24.25 0.90 3.26 1.51 0.23 290
LU25-44 21.10 25.00 3.90 0.10 0.91 0.29 166
LU25-45 26.00 27.20 1.20 1.36 0.64 0.68 29.2
LU25-46 No significant assays
LU25-47 19.90 23.80 3.90 0.19 0.48 0.35 118
inc. 22.25 22.90 0.65 0.76 0.58 0.62 10.0
LU25-48 15.00 23.00 8.00 0.07 0.69 0.37 136
LU25-49 19.00 31.70 12.70 0.16 0.59 0.31 253
inc. 20.10 20.50 0.40 2.42 1.80 0.23 130
with 29.70 31.70 2.00 0.13 0.93 0.43 765
and 31.70 32.70 1.00 1.53 0.96 1.12 5.0
LU25-50 18.90 24.20 5.30 2.78 0.83 0.53 230
inc. 19.50 22.00 2.50 5.73 1.12 0.53 287
LU25-51 22.00 31.10 9.10 7.71 1.15 0.40 74.7
inc. 24.05 27.40 3.35 20.45 0.38 0.72 -