Discovers high-grade gold 130 meters north of the Jumbo resource
Page 1
Gold Springs Resource Corp.
Discovers high-grade gold 130 meters north of the Jumbo resource
Vancouver, 7 September 2021
Gold Springs Resource Corp. (TSX: GRC, OTCQB: GRCAF) (the “Company” or “GRC”) has
received assays from several additional holes located within the Jumbo Trend on the
Utah portion of its large flagship Gold Springs project located in the USA on the border of
Nevada and Utah, one of the best mining jurisdictions in the world.
Highlights include:
- 5.95 g/t gold with 66.5 g/t silver over 24.4 meters, which included
27.30 g/t gold with 259.4 g/t silver over 4.6 meters, and
0.52 g/t gold with 4.7 g/t silver over 82.3 meters in hole J-21-006 (North Jumbo)
- 0.52 g/t gold with 3.3 g/t silver over 16.8 meters in hole E-21-016 (South Jumbo)
- 1.02 g/t gold with 99.7 g/t silver over 1.5 meters in hole JP-21-004 (Juniper).
Randall Moore, Executive Vice President of Exploration, stated: “Hole J -21-006 is
extremely important as it confirms that there are higher-grade gold areas as we can see in
the upper part of the hole, and also for its lower thick intercept with similar grades of our
current resource. These results extend gold mineralization an additional 130 meters north
of the current North Jumbo resource. We want to continue drilling following this strong
CSAMT geophysical high resistivity area which extends to the north for 1,200 meters, with
the objective of testing the continuation of this high -grade gold mineralization and the
potential extension of the North Jumbo resource area”.
2021 ongoing drilling program:
The Company has now completed 52 holes for 10,624 of the 23,300 meters program:
• 28 holes at the Jumbo Trend (16 at South Jumbo, 3 at Central Jumbo, 9 at North Jumbo)
• 15 holes at Charlie Ross
• 5 holes at Juniper
• 3 holes at White Point
• 1 hole at North Jennie.
The Company’s current plan is to drill 7 additional holes at White Point and then follow
up the holes at North Jumbo with good gold results, in particularly around hole J-21-006,
with the objective of testing the continuation of this high-grade gold mineralization and
the potential extension of the North Jumbo resource area.
Page 2
Drilling highlights include
Hole From (m) To (m) Thickness**
(m)
Gold (g/t) Silver (g/t) Gold Equivalent*
(g/t)
J-21-006 118.9 143.3 24.4 5.95 66.5 6.87
including 129.5 134.1 4.6 27.3 259.4 30.9
and 192.0 274.3 82.3 0.52 4.7 0.59
including 192.0 217.9 25.9 0.68 5.7 0.76
E-21-015 99.1 100.6 1.5 1.01 2.0 1.04
E-21-016 19.8 36.6 16.8 0.51 3.3 0.56
and 103.6 108.2 4.6 0.81 6.6 0.90
and 160.0 161.5 1.5 1.5 2.0 1.53
J-21-002 6.1 9.1 3.0 0.46 7.5 0.56
JP-21-004 178.3 179.8 1.5 1.02 99.7 1.40
* Gold Equivalent calculated at $1,800 gold and $25 silver
** True thickness is estimated to be 80-100% of total thickness
Drill Hole Table
Hole ID Target Easting
UTM NAD
27
Northing Elevation
(m)
Azimuth Inclination TD
(m)
Assays
E-21-015 South Jumbo 760531 4196488 1981 110 -45 200.2 Received
E-21-016 South Jumbo 760651 4196392 1992 120 -45 204.2 Received
J-21-002 North Jumbo 761241 4198454 2076 290 -60 184.4 Received
J-21-006 North Jumbo 761326 4199699 2121 270 -70 274.3 Received
JP-21-004 Juniper 761005 4200134 2126 270 -70 240.8 Received
For more information on North Jumbo, please visit:
https://goldspringsresource.com/projects/targets-with-resource/the-north-jumbo-resource/
Qualified Person
The Qualified Person on the Gold Springs property is Randall Moore, Executive Vice
President of Exploration of Gold Springs Resource Corp. and he has reviewed and
approved the content of this press release. The Qualified Person verified the data
disclosed herein for its geological reasonableness, checked all the inputs and verified the
analytical data through an analysis of the blanks and standards submitted with the drill -
chip samples.
Page 3
Quality Assurance and Quality Control
Approximately 7 kg of RC chips were sent to the laboratory for each 1.52 meters drill
interval. Standards and blanks are submitted into the sample stream at the rate of 15%
for QA/QC purposes. In addition, the laboratory also includes duplicates of samples,
standards and blanks. The results of these check assays are reviewed prior to the release
of data. All RC sample assays are also reviewed for their geological context and checked
against the drill logs.
Assay Method
Assays were performed in Sparks, Nevada by Paragon Geochemical, an ISO 9001:2000
Certified and independen t laboratory. Gold was analyzed by fire assay of a 30 -gram
sample with an AAS finish with samples assaying greater than 3 g/t re-assayed using a
30-gram sample and a gravity finish. All other elements were analyzed by a four -acid
leach ICP method.
About Gold Springs Resource Corp.
Gold Springs Resource Corp. (TSX: GRC and OTCQB: GRCAF) is focused on the
exploration and expansion of the gold and silver resources of its PEA-stage Gold Springs
project located on the border of Nevada and Utah, USA. The project is situated in the
prolific Great Basin of Western USA, one of the best mining jurisdictions in the world.
Gold Springs Resource Corp. Contact:
Antonio Canton, President and CEO
Forward Looking Statements
Certain statements contained herein constitute “forward -looking information” under
applicable Canadian securities laws (“forward -looking statements”). Forward -looking
statements look into the future and provide an opinion as to the effect of certain events and
trends on the business. Forward-looking statements may include words such as “potential”,
“plan”, “next”, “continue”, “will”, and similar expressions. These forward-looking statements
are based on current expectations and entail various risks and uncertainties. Actual results
may materially differ from expectations if known and unknown risks or uncertainties affect
our business or if our estimates or assumptions prove inaccurate. Factors that could cause
results or events to differ materially from current expectations expressed or implied by the
forward-looking statements, include, but are not limited to, risks of the mineral exploration
industry which may affect the advancement of the Gold Springs project, including possible
variations in mineral re sources, grade, recovery rates, metal prices, capital and operating
Page 4
costs, and the application of taxes; availability of sufficient financing to fund planned or
further required work in a timely manner and on acceptable terms; availability of equipment
and qualified personnel, failure of equipment or processes to operate as anticipated,
changes in project parameters, including water requirements for operations, as plans
continue to be refined; regulatory, environmental and other risks of the mining industry more
fully described in the Company’s Annual Information Form and continuous disclosure
documents, which are available on SEDAR at www.sedar.com. The assumptions made in
developing the forward -looking statements include: the accuracy of current resource
estimates and the interpretation of drill, metallurgical testing and other exploration results;
the continuing support for mining by local governments in Nevada and Utah; the availability
of equipment and qualified personnel to advance the Gold Springs project; execution of the
Company’s existing plans and further exploration and development programs for Gold
Springs, which may change due to changes in the views of the Company or if new
information arises which makes it prudent to change such plans or programs.
Readers are cautioned not to place undue reliance on the forward -looking statements
contained in this press release. Except as required by law, the Company assumes no
obligation to update or revise any forward -looking statement, whether as a result o f new
information, future events or any other reason. Unless otherwise indicated, forward-looking
statements in this press release describe the Company’s expectations as of the date hereof.