Phase 1 diamond drill program at its flagship Wild Dog Project (“Wild Dog” or the “Project”), located on the island of New Britain, East New Britain Province, Papua New Guinea ("PNG").
TSX-V: GPAC OTCQX: GPGCF GER: V3H
www.gpacgold.com | 1
0.8m @ 127 g/t AuEq in Surface Sampling and 5.0m @ 4.9 g/t AuEq in Drilling
at Great Pacific Gold’s Wild Dog Project
September 24, 2025 – Vancouver, BC, Canada – Great Pacific Gold Corp. ("Great Pacific Gold," "GPAC,"
or the "Company") (TSXV: GPAC | OTCQX: GPGCF | Germany: V3H) announces results from its expanded
Phase 1 diamond drill program at its flagship Wild Dog Project (“Wild Dog” or the “Project”), located on
the island of New Britain, East New Britain Province, Papua New Guinea ("PNG").
Key Highlights:
• Sampling of Exposed Vein Structures in Southern Oxide Area:
o 0.8 m @ 127 g/t AuEq from Main Vein sample WDGS-036 (122 g/t Au, 2.7% Cu, 88 g/t Ag)
o 2.4 m @ 22 g/t AuEq from Main Vein sample WDGS-027, 028, 029 (17.2 g/t Au, 2.3% Cu,
94 g/t Ag).
• Hole WDG-09 intercepted:
o 5.0 m @ 4.91 g/t AuEq from 169m (4.49 g/t Au, 0.21% Cu, 7.6 g/t Ag);
o Including: 2.0m @ 11.1 g/t AuEq from 169m (10.3 g/t Au, 0.41% Cu, 15.0 g/t Ag), and
o 2.6 m @ 6.62 g/t AuEq from 182.4m (2.74 g/t Au, 2.16% Cu, 42.96 g/t Ag).
• Second drill rig being mobilized : additional c amp capacity is being developed to support the
second rig at the Wild Dog site.
• LiDAR survey completed with results due October 6, 2025: High-precision fixed-wing airborne
LiDAR and large -format imagery survey covering 187 km² across the Wild Dog district has been
completed. The program will generate a Digital Terrain Model with sub -10 cm vertical accuracy,
providing critical topographic con trol for geological modelling, drill planning, and infrastructure
layout. The dataset will also support structural mapping and refine target definition across the
broader Wild Dog corridor.
“Hole 9 was drilled approximately 30m to the north of hole 7 , into an area where we had very little
information,” stated Greg McCunn, CEO . “ The intercept with the main Wild Dog structure supports the
continuity of the syste m. With hole 10 also intercepting the main structure a further 70 meters north
(assays pending), we are increasingly confident in our geological model that is supporting the Phase 1 drill
program. With the second rig being mobilized, we are expecting to accelerate the completion of the
planned 28 holes at Sinivit which are providing valuable information on vein orientation allowing us to
start testing the system at depth. Mobile MT geophysics has highlighted significant potential at depth and
along strike to both the North and South from Sinivit on the large-scale epithermal Wild Dog corridor.”
www.gpacgold.com | 2
“The recent mapping and sampling campaign in the historic Southern Oxide pit area was undertaken to
support modeling of the vein structures intersected in drill holes WDG-03, 04, 05 and 06 earlier in the Phase
1 program. The high- grade results in the veins exposed in the historic pit confirm the high- grade nature
of the system.”
Wild Dog Phase 1 Diamond Drill Program
The Phase 1 program commenced in May 2025 and is designed to test the Sinivit target, a 1.5 km strike
length within the 15 km Wild Dog epithermal vein structural corridor (Figure 1). The high-grade nature of
the system has already been confirmed by multiple strong intercepts.
In addition, recent processing of MobileMT geophysical data has highlighted the exceptional scale of the
epithermal system and the potential for a major porphyry copper-gold system adjacent to the veins — a
setting analogous to the Wafi -Golpu deposit in PN G ( mineralization at Wafi -Golpu is not necessarily
indicative of mineralization at Wild Dog).
The expanded program now totals 28 diamond drill holes a nd is expected to continue into early 2026.
Drilling to date has only tested a small portion of the mineralized corridor, which remains open to the
north, south, and at depth. A second drill rig is in the process of being mobilized to site.
Figure 1: Long section through the Sinivit target area showing drilling completed to-date with key intervals.
Since commencing in May 2025, GPAC has completed ten drill holes at Sinivit. Hole WDG-10 experienced
poor core recovery within the main Wild Dog structure, which was intercepted from 173 meters to 185
meters. Although samples have been collected and submitted for assay, a decision was made to re -drill
the hole to ensure full recovery of the target zone , and WDG-10A is well underway and currently at 165
www.gpacgold.com | 3
meters depth. Details of the drilling are shown in Table 1 with key assay results received to-date are
shown in Table 2.
Results
Table 1: Wild Dog Drill Hole Details (PNG94 UTM coordinates).
Hole ID Easting Northing RL Dip Azi Max
Depth
(m)
Status
WDG-01 394358.3 9488853.5 945 -50 115 40.1 Abandoned
WDG-02 394426.0 9489024.2 900 -53 050 124.6 Completed
WDG-03 394384.9 9488926.5 924 -50 053 127.6 Completed
WDG-04 394384.8 9488926.5 924 -50 75 120.6 Completed
WDG-05 394384.8 9488926.5 924 -50 116 105.9 Completed
WDG-06 394428.6 9488923.1 911 -50 352 69.0 Completed
WDG-07 394457.5 9489375 993 -61 114 201.3 Completed
WDG-08 394455.5 9489373.0 993 -57 127 224 Completed
WDG-09 394459.5 9489374.0 993 -58 85 203 Completed
WDG-10 394475.1 9489484 965 -58 114 220 Completed
WDG-10A 394475.1 9489484 965 -57 114 TBD In progress
Table 2: Wild Dog Drill Hole Key Assay Results (WDG-02 to WDG-08 results previously announced).
Hole ID From
(m)
To
(m)
Interval1
(m)
Gold
(g/t)
Silver
(g/t)
Copper
(%)
Gold Eq.2
(g/t)
WDG-02 65.0 72.0 7.0 5.49 68.84 2.96 10.91
including 65.0 67.0 2.0 10.73 114.64 2.23 15.53
WDG-03 102.0 104.3 2.3 1.68 6.48 0.12 1.94
including 103.55 104.3 0.75 4.05 10.90 0.17 4.45
WDG-04 62.0 68.0 6.0 8.31 27.56 2.37 12.35
including 64.0 68.0 4.0 12.25 36.76 1.71 15.35
including 64.0 66.4 2.4 19.76 57.75 2.59 24.48
WDG-05 72.0 77.0 5.0 1.28 11.71 0.25 1.80
including 72.0 75.0 3.0 1.91 15.36 0.31 2.58
WDG-06 12.0 15.5 3.5 4.61 48.36 4.86 12.79
including 13.7 14.3 0.6 7.44 73.40 10.42 24.61
WDG-07 153.0 163.0 10.0 2.99 10.92 0.32 3.61
including 153 158.1 5.1 4.77 14.54 0.54 5.79
WDG-07 172.0 173.2 1.2 7.30 93.5 1.14 10.17
including 172.5 173.2 0.7 12.00 178.0 1.94 17.10
WDG-08 154 162.4 8.4 46.46 59.63 1.90 50.12
including 154 157.8 3.8 93.30 128.72 4.74 102.2
including 157 157.8 0.8 322.0 84.5 4.26 329.65
WDG-08 180 188 8 1.95 4.19 0.13 2.20
including 180 184 4 3.32 3.71 0.16 3.62
WDG-09 169 174 5 4.49 7.60 0.21 4.91
www.gpacgold.com | 4
including 169 171 2 10.31 15.0 0.41 11.13
WDG-09 182.4 185.0 2.6 2.74 42.96 2.16 6.62
including 182.8 184.3 1.5 4.17 41.87 1.89 7.61
Notes:
1. Drill highlights presented above are core lengths (true widths are not known at this time).
2. Gold equivalent (AuEq) exploration results are calculated using longer -term commodity prices
with a copper price of US$4.50/lb, a silver price of US$27.50/oz and a gold price of US$2,000/oz.
No metallurgical testing has been carried out on Wild Dog mineralized samples. For AuEq
calculations, recovery assumptions of Au 92.6%, Ag 78.0%, and Cu 94.0% were used based on K92
Mining’s stated recovery results in an Updated Definitive Feasibility Study for the Kainantu mine.
WDG-09 Summary
Hole WDG-09, drilled approximately 30 metres north of WDG-07, successfully intersected the main Wild
Dog structure and returned 5.0 metres at 4.9 g/t AuEq from 169 metres, including 2.0 metres at 11.1 g/t
AuEq. A second mineralised zone was encountered bet ween 182.4 and 185.0 metres, averaging 2.6
metres at 6.6 g/t AuEq, including 1.5 metres at 7.6 g/t AuEq. This deeper interval contained exceptionally
high copper values, with assays up to 5.5% Cu accompanied by elevated silver grades, reflecting the
presence of bornite and chalcopyrite observed in core. The mineralisation is hosted within banded quartz–
silica breccias and vein material, consistent with the high -sulphidation epithermal style recognised at
Sinivit. These results confirm continuity of the Wild Dog system to the north, while also highlighting the
potential zonation within the structure, where in this case a high-grade gold shoot is underlain by copper–
silver rich sulphide domains. Importantly, the combination of strong Au, Cu, and Ag values supports the
potential for vertically extensive minerali zed shoots, strengthening the broader geological model and
demonstrating the prospectivity of the Wild Dog vein corridor at depth.
Figure 2: Drill core from Hole WDG -09 (182.5 m) illustrating a quartz –silica breccia cut by a colloform
banded sulphide vein. Massive chalcopyrite with associated bornite occurs as coarse infill along the vein
margins and in open spaces, overprinting black silica breccia clasts. This mineral assemblage is
characteristic of a high-sulphidation epithermal system and corresponds to assays returning multi-percent
copper and elevated Au–Ag values from this interval.
www.gpacgold.com | 5
Figure 2: Drill core from Hole WDG-09 (183.15 m) displaying colloform banded quartz–silica veining with
coarse-grained sulphide mineralisation. Bornite occurs as blebs and bands with associated chalcopyrite
along quartz vein margins and in the matrix.
Southern Pit Rock Chip Sampling
On September 10, 2025, GPAC geologists undertook a sampling and mapping campaign in the historic
Southern Oxide Pit area. Wild Dog main Vein structures which were intercepted in drill holes WDG -03,
04, 05 and 06 outcrop in the historic pit area and sampling and mapping was undertaken to support
modelling of the veins in the area.
In total, seventeen samples were collected. In the west wall of the historic South Oxide Pit, the main vein
can be observed (Figure 3).
Figure 3: Photo of sample location for WDGS-036 which returned 0.8 meters at 127 g/t AuEq. The main
vein in this area shows black silica, grey-white quartz with chalcocite, bornite and chrysocolla.
In the east wall of the historic South Oxide Pit, the main vein can also be observed (Figure 4).
www.gpacgold.com | 6
Figure 4: Photo of outcrop of main vein location for samples WDGS-027, 028, and 029 which returned
2.4 meters at 22 g/t AuEq. Black silica with stage 2 quartz veining is evident in sample WDGS-027 with
predominantly white quartz with chalcopyrite in WDGS-028.
On behalf of Great Pacific Gold
Greg McCunn, Chief Executive Officer and Director
For further information visit gpacgold.com or contact:
Email: [email protected]
Tel: +1 778 262 2331
Qualified Person
The technical content of this news release has been reviewed, verified and approved by Callum Spink, the
Company’s Vice President, Exploration, who is a member of the Australian Institute of Geoscientists,
MAIG, and a Qualified Person as defined by National Instrument NI 43 -101 Standards of Disclosure for
Mineral Projects. Mr. Spink is responsible for the technical content of this news release. Mr. Spink is not
independent of the Company.
Quality Assurance / Quality Control (QAQC)
The Company adheres to industry best practices for Quality Assurance and Quality Control. Drill core
samples were submitted to Intertek Minerals Ltd. in Lae, Papua New Guinea, an ISO 9001 -certified
laboratory. Samples were securely sealed in poly -weave bags with single-use tie-locks to maintain chain
www.gpacgold.com | 7
of custody. Analytical testing was completed using fire assay with additional multi-element MS48 analysis
underway.
Diamond drill hole WDG -02 was drilled using a combination of HQ and PQ diameter core , while the
remainder of the holes were drill ed with PQ. Certified reference materials (standards) and blanks were
inserted into the sample stream in accordance with industry -standard protocols. Blanks were routinely
inserted after high-grade intervals, and certified standards were included at a frequency of at least 5%.
All assay batches received to date h ave passed QAQC review and fall within acceptable tolerance limits.
Core recoveries for all holes were within acceptable ranges, with sampling procedures carefully managed
in intervals where ground conditions were variable or fragile.
Preliminary copper assays are reported from assay results generated by aqua regia digestion and atomic
absorption (AA) copper determination. The results are updated with assay results using MS48 (m etallic
screen fire assay) with four-acid digestion and atomic adsorption spectroscopy for copper determination.
About Great Pacific Gold
Great Pacific Gold’s vision is to become the leading gold -copper development company in Papua New
Guinea ("PNG"). The Company has a portfolio of exploration-stage projects in PNG, as follows:
• Wild Dog Project: the Company’s flagship project is located in the East New Britain province of
PNG. The project consists of a large -scale epithermal target, the Wild Dog structural corridor,
stretching 15km in strike length and potentially over 1,000 meters deep based on a recent
MobileMT geophysics survey. The survey also highlighted the Magiabe porphyry target, adjacent
to the epithermal target and potentially 1,000 meters in diameter and over 2,000 meters deep.
Drilling of the epithermal structure on the Sinivit target has yielded high -grade results, including
WDG-02 which intercepted 7.0 meters a t 11.2 g/t AuEq from 65 m eters. The current drilling
program will extend into 2026 with 5,000 meters planned over 28 holes.
• Kesar Project: located in the Eastern Highlands province of PNG and contiguous with the mine
tenements of K92 Mining Inc. ("K92"), the Kesar Project is a greenfield exploration project with
several high -priority targets in close proximity to the property boundary with K9 2. Multiple
epithermal veins at Kesar are on strike and have the same orientation as key K92 deposits, such
as Kora. Exploration work to date by the Company at the Kesar Project has shown that these veins
have high grades of gold present in outcrop and very elevated gold in soil grades, coincident with
aeromagnetic highs. The Company conducted a diamond drill program on key target areas at the
Kesar Project from November 2024 to May 2025 and are working on developing a follow-up Phase
2 program for Q1 2026.
• Arau Project: also located in the Eastern Highlands province of PNG, the Arau Project is south of
and contiguous to the mine tenements of K92. Arau contains the highly prospective Mt. Victor
exploration target with potential for a high sulphidation epithermal gold -base metal deposit. A
Phase 1 Reverse Circulation drilling program was completed at Mt. Victor in August 2024, with
encouraging results. The Arau Project includes the Elandora licence, which also contains various
epithermal and copper-gold porphyry targets.
The Company also holds the Tinga Valley Project in PNG.
www.gpacgold.com | 8
Forward-Looking Statements
Information set forth in this news release contains forward- looking statements that are based on
assumptions as of the date of this news release. These statements reflect management's current
estimates, beliefs, intentions and expectations. They are not guarantees of future performance. Great
Pacific Gold cautions that all forward- looking statements are inherently uncertain and that actual
performance may be affected by many material factors, most of which are beyond their respective control.
Such factors include, among other things: risks and uncertainties relating to Great Pacific Gold's limited
operating history, its exploration and development activities on its mineral properties and the need to
comply with environmental and governmental regulations. Accordingly, actual and future events,
conditions and results may differ materially from the estimates, beliefs, intentions and expectations
expressed or implied in the forward- looking information. Except as required under applicable securities
legislation, Great Pacific Gold does not undertake to publicly update or revise forward-looking information.
Mineralization at the properties held by K92 Mining Inc. and at the Wafi -Golpu deposit is not necessarily
indicative of mineralization at the Wild Dog Project.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies
of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.