Garibaldi Drills 6.19% Nickel and 2.06% Copper from Surface Over 4.4 Meters in Central Zone at Nickel Mountain
Garibaldi Drills 6.19% Nickel and 2.06% Copper from Surface Over 4.4
Meters in Central Zone at Nickel Mountain
TSXV: GGI
OTC: GGIFF
Frankfurt: RQM
VANCOUVER
,
April 11, 2019
/CNW/ - Garibaldi Resources (TSXV: GGI) (the "Company") or "Garibaldi") is pleased to provide the following exploration update
including final 2018 drill hole results, all from outside the Upper and Lower Discovery zones at Nickel Mountain.
Three additional drill holes in the Northwest zone all intersected disseminated sulphide mineralization typical of this area, including one of the widest intervals
to date - 51.2 meters grading 0.72% nickel and 0.67% copper in EL-18-46. This zone has been extended further to the south into highly prospective terrain
with orbicular gabbro and massive sulphide veins toward the contact of the intrusion;
The first shallow drill holes into a portion of the "Crevasse" showing at the northern edge of the Central zone confirmed the presence of high-grade nickel
mineralization to a depth of at least 28 meters below surface. This area remains open to the east, west and at depth with drill results highlighted by 6.19%
nickel and 2.06% copper over 4.44 meters starting from surface in EL-18-45;
Limited drilling under the 1.6-km-long icefield, regional surface mapping and lithogeochemistry have greatly expanded the strike length of the gabbroic rocks
of the Nickel Mountain Complex (NMC) to 12 km in a northeast direction, well beyond Anomaly "A".
Steve Regoci
, Garibaldi President and CEO, commented: "Camp is scheduled to re-open in mid-May. Our geological team enters the 2019 program with more
excitement and confidence than ever after reviewing all data from six months of Nickel Mountain drilling covering 46 holes (2017 and 2018).
"The stage is set for a fast-paced 2019 to fully unlock the value of the Golden Triangle's first nickel-copper-rich magmatic massive sulphide system," Regoci
concluded.
Crevasse Showing Samples Average 5.3% Nickel
Receding ice has exposed new outcrops of massive sulphide mineralization at Nickel Mountain, creating additional opportunities to expand the footprint of massive
sulphides along the contact of the E&L Intrusion.
Sixteen rock samples collected along a strike length of 34 meters from insitu outcrop at the Crevasse showing of massive and semi-massive sulphides averaged
5.3% nickel and 2.3% copper. They also included an average of 0.21% cobalt, 0.25 g/t platinum, 0.37 g/t palladium, 0.19 g/t gold and 3.8 g/t silver (see table
further below in this news release).
The Crevasse showing, discovered late in last year's program after an unprecedented summer of ice retreat, will be followed up aggressively along strike and at
depth. The showing extends from west to east for 34 meters (open in both directions and at depth) and then dips under a talus field that will be drilled this
summer. Only 15 meters of strike was drill-tested last fall before winter conditions shut down operations.
Garibaldi Expands Nickel Mountain Gabbroic Complex
Garibaldi's extensive 2018 program allowed geologists to expand the footprint of outcropping gabbroic rocks for approximately 12 km along strike of the E&L
deposit, adding significantly to Nickel Mountain's overall exploration potential.
The E&L Intrusion resides within the NMC, and it consists of magnesium-rich taxitic and orbicular-textured olivine gabbros. The lateral extent of the E&L Intrusion
is open to the ESE and at depth, and potential exists for massive and disseminated sulphide mineralization in strike extensions of the intrusion well beyond the
footprint of the intrusion identified at this time. Exploration for additional intrusions like E&L was initiated in 2018 with follow-up of magnetic and electromagnetic
anomalies, surface mapping of gabbroic rocks, and lithogeochemical sampling. The greatly expanded strike length of the NMC will be an important component of
Garibaldi's exploration and drilling strategy in 2019.
Significant Drill Hole Intercepts (EL-18-34 to EL-18-46)
Interval
Code
Hole
#
Interval width
(from - to)
Ni
(%)
Cu
(%)
Co
(%)
Pt
(g/t)
Pd
(g/t)
Au
(g/t)
Ag
(g/t)
Ni+Cu
(>1%)
Northwest Zone
Y
EL-18-46
over 2.04m (29.25 - 31.29m)
0.71
0.36
0.032
0.015
0.034
0.010
1.5
1.07
Z
EL-18-46
over 51.2m (37.5 - 88.7m)
0.72
0.67
0.022
0.172
0.255
0.187
2.0
1.39
AA
EL-18-37
over 4.5m (61.5 - 66.0m)
0.53
0.50
0.017
0.150
0.170
0.160
2.8
1.03
AB
EL-18-37
over 6.0m (87.0 - 93.0m)
0.57
0.46
0.020
0.165
0.277
0.154
3.3
1.03
AC
EL-18-36
over 20.4m (6.1 - 26.5m)
0.59
0.48
0.021
0.144
0.216
0.129
1.0
1.07
*
including
over 0.42m (25.13-25.55m)
6.17
1.81
0.211
0.320
0.613
0.139
3.1
7.98
Central Zone (Crevasse Showing)
AD
**EL-18-45
over 4.44m (0.0 - 4.44m)
6.19
2.06
0.201
0.247
0.458
0.090
3.4
8.25
AE
EL-18-43
over 6.25m (0.0 - 6.25m)
1.38
0.85
0.044
0.113
0.172
0.080
3.7
2.23
**
including
over 0.79m (5.46 - 6.25m)
5.21
2.10
0.189
0.225
0.362
0.086
4.4
4.57
AF
EL-18-42
over 5.5m (3.5 - 9.0m)
1.74
0.89
0.051
0.186
0.235
0.130
5.5
2.63
**
including
over 1.28m (7.42 - 8.7m)
5.87
2.33
0.165
0.416
0.566
0.176
11.5
8.20
AG
EL-18-41
over 11.62m (16.76 - 28.38m)
0.89
0.48
0.031
0.292
0.507
0.244
5.0
1.37
*
including
over 1.86m (26.52 - 28.38m)
3.42
0.77
0.128
0.240
0.504
0.031
9.0
4.19
AH
EL-18-38
over 18.38m (0.0 - 18.38m)
0.89
0.65
0.025
0.202
0.264
0.144
2.7
1.54
**
including
over 0.95m (16.22 - 17.17m)
6.89
3.58
0.202
0.870
0.924
0.305
5.0
10.47
Combined 1% nickel plus copper is a minimum threshold for comparative analysis. Intervals are core lengths (true widths unknown at this time)
**
denotes interval of massive sulfides (>75% sulfides)
*
denotes semi-massive sulfides (50 - 75% sulfides)
Exploratory Drilling Outside of Main Zones
Three holes were drilled last fall (EL-18-44, EL-18-40 and EL-18-39) to begin to build an understanding of the geology and exploration potential beneath the
icefield north and northeast of the expanding mineralized footprint of the known E&L zones.
Drill holes EL-18-44 and EL-40 were collared approximately 1,000 meters ENE of the Discovery zones. Both holes intersected weakly mineralized NMC gabbro
near-surface (0 to 35.4 meters in EL-18-44, and 0 to 101 meters in EL-18-40).
Drill hole EL-18-39 was highly encouraging as it targeted under the icefield from the eastern side of the NE fault zone. It intersected gabbro of the NMC and
Hazelton Group sediments. The gabbroic rocks included a section of variable textured gabbro/melagabbro with disseminated sulphides from 310 meters to 519.4
meters. Another deeper interval of weakly mineralized gabbro interleaved with mudstone was intersected from 783.6 to 1,007.8 meters. This has provided
important information about the extent and geometry of the NMC.
Drill hole EL-18-35 was collared approximately 200 meters southwest of the Lower Discovery zone and intersected a 278-meter package of NMC gabbro with
variable textured intervals and trace disseminated to locally blebby sulphides, warranting follow-up.
Drill hole EL-18-34 was collared approximately 700 meters southeast of the Lower Discovery zone, targeting a strong magnetic response. This hole intersected a
sequence of weakly magnetic volcanic rocks with local interfingered sedimentary rocks and minor disseminated pyrite and rare chalcopyrite. Follow-up is required
in this area as well.
Central Zone Crevasse Showing Assay Results (Along 34 Meters of Strike)
Sample
Northing
Easting
Ni
(%)
Cu
(%)
Co
(%)
Pt
(g/t)
Pd
(g/t)
Au
(g/t)
Ag
(g/t)
Ni+Cu
(%)
25401
6271539.1
396158.0
4.07
2.39
0.173
0.43
0.513
0.339
6.1
6.46
25402
6271538.7
396159.1
2.41
2.86
0.086
0.18
0.33
0.284
3.5
5.27
25403
6271537.7
396159.8
5.31
2.73
0.22
0.41
0.425
0.325
5.7
8.04
25404
6271534.0
396162.8
5.14
1.98
0.199
0.30
0.451
0.104
2.8
7.12
25405
6271533.7
396163.2
5.47
2.71
0.211
0.34
0.269
0.111
3.6
8.18
25406
6271531.6
396164.2
5.05
2.74
0.21
0.32
0.270
0.144
2.6
7.79
25407
6271529.6
396163.8
4.56
1.55
0.191
0.29
0.240
0.043
2.0
6.11
25408
6271530.7
396164.1
5.15
1.97
0.208
0.23
0.422
0.073
2.5
7.12
25409
6271527.1
396171.8
4.71
3.00
0.233
0.11
0.254
0.082
3.4
7.71
25410
6271526.3
396172.1
5.36
1.82
0.206
0.14
0.186
0.031
2.2
7.18
25411
6271520.1
396175.1
7.29
2.21
0.24
0.20
0.446
0.086
2.5
9.5
25412
6271520.0
396176.4
6.23
1.53
0.221
0.23
0.496
0.081
1.6
7.76
25413
6271520.5
396175.5
5.42
2.01
0.233
0.15
0.202
0.062
3.7
7.43
25414
6271518.1
396184.3
6.32
2.61
0.189
0.29
0.729
1.090
11.6
8.93
25415
6271528.6
396171.1
6.13
2.49
0.278
0.19
0.387
0.113
4.9
8.62
25416
6271528.6
396171.1
6.24
1.62
0.233
0.20
0.368
0.059
2.2
7.86
Averages
5.30
2.26
0.208
0.251
0.374
0.189
3.8
7.57
Drill Hole Collar Coordinates (EL-18-34 to EL-18-46)
Hole
Zone
Easting*
Northing*
Elevation (MASL)
Azimuth
Dip
Length (m)
EL-18-46
Northwest/Central
396098.0
6271537.0
1904.0
196
-48
138.7
EL-18-45
Central (Crevasse)
396163.2
6271530.8
1869.6
103
-44.6
108.8
EL-18-44
Exploration
396966.9
6272037.3
1766.3
000
-80
180.2
EL-18-43
Central (Crevasse)
396160.4
6271531.4
1869.8
045
-84
222.8
EL-18-42
Central (Crevasse)
396183.4
6271508.4
1868.1
350
-50
127.0
EL-18-41
Central (Crevasse)
396183.3
6271507.4
1868.2
315
-70
184.0
EL-18-40
Exploration
396966.9
6272039.5
1766.3
000
-45
681.0
EL-18-39
Exploration
396295.0
6271480.0
1842.0
000
-55
1029.0
EL-18-38
Central (Crevasse)
396182.7
6271508.2
1868.1
315
-45
206.0
EL-18-37
Northwest
396111.1
6271475.2
1882.2
275
-84
168.0
EL-18-36
Northwest
396109.9
6271475.6
1882.3
280
-46
117.0
EL-18-35
Exploration
396109.0
6271405.2
1873.1
210
-79
321.1
EL-18-34
Exploration
396792.9
6271128.7
1724.9
205
-78
365.5
Maps
Updated schematic cross-section and plan view maps are available on the Garibaldi website.
For an updated Google Earth image of Nickel Mountain and surrounding area, visit the "Projects" section of the website or the following URL:
http://www.garibaldiresources.com/i/maps/GGI_Nickel_Mtn_Google_Earth_Map.pdf
Quality Assurance/Quality Control (QA/QC)
Garibaldi Resources has applied a rigorous quality assurance/quality control program at the E&L Nickel Mountain Project using best industry practice. All core
was logged by a professional geoscientist and selected intervals were sampled. NQ2 drill core was sawn in half and each sample half was placed in a marked
sample bag with a corresponding sample tag then sealed. The remaining half core is retained in core boxes that are stored at a secure facility in
Smithers, British
Columbia
. Chain of custody of samples was recorded and maintained for all samples from the drill to the laboratory. All diamond drilling sample batches included
5% QA/QC samples consisting of certified blanks, standards and field duplicates. Two certified ore assay laboratory standards and one blank standard were
used in the process and were supplied by CDN Resource Laboratories Ltd., an independent laboratory located in
Langley, British Columbia
. Samples were
submitted to SGS Canada Inc. in
Vancouver, British Columbia
, an ISO 9001: 2008 certified lab, for base metal, sulphur and precious metal analysis using
Inductivity Coupled Plasma (ICP), Fire Assay (FA) and Leco methods.
Samples were prepared by crushing the entire sample to 75% passing 2 mm, riffle splitting 250 grams and pulverizing the split to better than 85% passing 75
microns. Gold, Platinum and Palladium were analyzed using a 30-gram fire assay and ICP-AES. Total sulphur was analyzed using a Leco method. Nickel, copper,
cobalt, silver and other elements were analyzed by sodium peroxide fusion and ICP-MS.
The performance on the blind standards, blanks and duplicates achieved high levels of accuracy and reproducibility and has been verified by
Jeremy Hanson
, a
Qualified Person as defined by NI-43-101.
Qualified Person Data Verification
Mr.
Jeremy Hanson
, P.Geo., VP Exploration Canada for the Company, and a Qualified Person as defined by NI-43-101, has supervised the preparation of,
reviewed and approved of, the disclosure of information in this news release. Mr. Hanson has verified the data, including drilling, sampling, test and recovery data
by supervising all of such procedures. There are no known factors that could materially affect the reliability of data collected and verified under his supervision. No
quality assurance/quality control issues have been identified to date.
About Garibaldi
Garibaldi Resources Corp. is an active Canadian-based junior exploration company focused on creating shareholder value through discoveries and strategic
development of its assets in some of the most prolific mining regions in
Mexico
and
British Columbia
.
We seek safe harbor.
GARIBALDI RESOURCES CORP.
Per:
"Steve Regoci"
Steve Regoci
, President
Neither the TSX Venture Exchange nor its Regulation Services Provider accepts responsibility for the adequacy or the accuracy of this release.
View original content:
http://www.prnewswire.com/news-releases/garibaldi-drills-6-19-nickel-and-2-06-copper-from-surface-over-4-4-meters-in-central-zone-at-nickel-mountain-300831055.html
SOURCE
Garibaldi Resources Corp.
View original content:
http://www.newswire.ca/en/releases/archive/April2019/11/c3503.html
%SEDAR: 00004262E
For further information:
1150 - 409 Granville Street - Vancouver, BC V6C 1T2, Telephone: (604) 488-8851, Website: GaribaldiResources.com
CO: Garibaldi Resources Corp.
CNW 16:49e 11-APR-19