Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

GCN.V ·

Goldcliff Prepares FOR Drilling at Nevada Rand

Exploration Programs

www.goldcliff.com

#400 – 789 W. Pender St.

Vancouver, B.C. V6C 1H2

Phone: 250-764-8879

Toll Free: 866-769-4802

GCN.TSXV www.directroyalty.com [email protected]

December 19, 2019

GOLDCLIFF PREPARES FOR DRILLING AT NEVADA RAND

Vancouver, B.C. – George Sanders, President of Goldcliff Resource Corporation (“Goldcliff” or the

“Company”) (GCN: TSX.V, GCFFF: OTCBB PINKS) reports that final preparations are being

discussed with Goldcliff’s drill contractor for a maiden diamond drill program on the Nevada Rand

silver/gold project, commencing in January. A “Notice to Conduct Mineral Exploration” was

submitted to the BLM on December 3, 2019. Goldcliff has an option from Ely Gold Royalties Inc. to

earn a 100% interest in the Nevada Rand property in Mineral County, Nevada by making staged

payments of $250,000 US over four years.

Most of the planned core drilling will be concentrated in the area of the Nevada Rand shaft. Holes

will test for additional mineralization along strike to the southeast and along strike to the northwest.

Underground mapping and sampling indicated that on the 250 ft level, workings extended to the

southeast much further than on all other levels above and below. Near the southeast end of the

drift there is some stoping above the 250 level. A sample taken from the end of this stope assayed

491 g/t Ag and 5.6 g/t Au. This area has not been developed by drifting on the levels above or

below and is open both up and down dip. Three holes are planned to test this area.

Another three holes are planned to the northwest. On the 150 ft level there is drifting in the hanging

wall side of the zone that is oriented more east-west than northwest-southeast. Sampling at the

west end of this drift yielded 356 g/t Ag and 11.65 g/t Au. It is unclear if this is a split of the main

structure, a splay, or a second structure. This zone was not explored by drifting on the levels

above or below. Drilling will test this zone and provide more detailed information about the

structural setting in this area.

Holes will be drilled from both sides of the vein zone. Although steeply dipping, underground

mapping showed that the dip can change directions over short distances. The planned scissor drill

pattern will provide a clearer indication of true width.

One hole will be spotted 550 metres to the northwest of the Nevada Rand shaft in an area now

called “Quartz Hill”. Several old reports described this area as intensely altered and identified it as

a high priority exploration target. “Quartz Hill” was so named by Goldcliff because of an outcrop of

quartz breccia. Rock sampling and stream sediment sampling nearby returned highly anomalous

gold values.

Drill site locations are being planned for the area around the three Lone Star shafts, located to the

southeast of the Nevada Rand shaft. Recent underground investigation of the Number Two

(middle) shaft (350 metres southeast of Nevada Rand) indicated extensive drifting on the 135 ft

level following alteration and mineralization, but no stoping. Sampling has confirmed that while

mineralized, precious metal grade in this area was not as high as the area around the Rand Shaft.

Most of the Lone Star production came from the Number Three shaft 230 metres further to the

east. One drill hole is planned for this area.

Ed Rockel, P. Geo, qualified person as defined by National Instrument 43-101 supervised the

preparation and verification of the technical information contained in this release.

For further information, please contact George W. Sanders, President, at 250-764-8879, toll free at

1-866-769-4802 or email at [email protected].

GOLDCLIFF RESOURCE CORPORATION

Per: “George W. Sanders”

George W. Sanders, President

Neither TSX Venture Exchange nor its Regulation Service Provider (as that term is defined in the policies of the TSX Venture Exchange) accept

responsibility for the adequacy or the accuracy of this news release.