Fireweed Intersects 15.12 m of 10.39% Zinc, 18.10 % Lead, and 296.9 g/t Silver, Including 8.15 m of 12.76% Zinc, 22.44% Lead, and 361.4 g/t Silver, at Tom South Step-Out Drill Hole
1
NEWS RELEASE
November 28, 2024 TSXV: FWZ
OTCQX: FWEDF
FSE: M0G
Fireweed Intersects 15.12 m of 10.39% Zinc, 18.10 % Lead, and 296.9 g/t Silver,
Including 8.15 m of 12.76% Zinc, 22.44% Lead, and 361.4 g/t Silver, at Tom South
Step-Out Drill Hole
Vancouver, British Columbia: Fireweed Metals Corp. (“Fireweed” or the “Company”) (TSXV:
FWZ; OTCQX: FWEDF) is pleased to report the results of six drill holes from Tom South and two
drill holes from Jason Main as part of the 2024 drill campaign at its Macpass Project, Yukon,
Canada.
Highlights
• Hole TS24-002 from 595.52 metres (“m”) downhole: 15.12 m (10 m true width) of
10.39% zinc (“Zn”), 18.10% lead (“Pb”), and 296.9 g/t silver (“Ag”), including 8.15 m (5.4
m true width) of 12.76% Zn, 22.44% Pb, and 361.4 g/t Ag in nearest to surface intercept
at Tom South to date , demonstrating an increase in grade and thickness up- plunge of
previous Tom South intercepts.
• Hole TS24-001 from 732.56 m downhole: 18.15 m (11 m true width) of 9.02% Zn, 7.46%
Pb, and 148.3 g/t Ag, including 8.32 m (5.0 m true width) of 16.18% Zn, 13.52% Pb, and
278.8 g/t Ag.
• Hole JS24-002 from 326 m downhole: 28.02 m (8.3 m true width) of 7.10% Zn, 1.41%
Pb, and 5.6 g/t Ag, including 12.90 m (3.8 m true width) of 11.30% Zn, 2.74% Pb, and 10.3
g/t Ag.
• Significant concentrations of germanium and gallium associated with sphalerite
mineralization (included within the full results in Table 1).
CEO Statement
Peter Hemstead, President and CEO, stated, “The consistent high-grade intercepts at Tom South
reinforce that the feeder zone in this area continues to define Tom as one of the most prolific
known concentrations of zinc, lead, and silver in the Macpass District, with spectacular grades
representing intersections comprised almost entirely of sphalerite and galena. TS24-002
represents the nearest-to-surface and highest-grade intercept at Tom South to date, with a broad
distance of 200 metres remaining open for testing the up -dip projection of this high- grade
2
mineralized panel towards previous historical drilling. The feeder style mineralization intersected
at Tom South is one of several localized zones at Tom that have very high silver grades, further
enhancing the overall commodity mix of this deposit.”
Summary
The drill holes in this release comprise intervals of stratiform to massive zinc, lead, silver sulphide
mineralization (in the form of sphalerite and galena) from Tom South and Jason Main. At Tom
South, this zone of mineralization was first defined in 2023 following up on an isolated historical
intercept from 1990 and is interpreted as a continuous panel of high-grade zinc, lead, and silver
mineralization representing a feeder zone. The intercepts in this release comprise step-outs from
both the 1990 and 2023 intersections and continue to support the expansion of the mineralized
domain both up and down dip. Hole TS24-002 reveals a significant increase in grade up-dip, with
grades twice as high compared to those modeled for this zone in the 2024 Mineral Resource
Estimate (“MRE”)1. The implications of this intercept are three-fold:
- Potential to upgrade Inferred material to the Indicated category;
- Substantially enhances resource grades within this zone; and,
- Extends the projection of mineralization f arther up -dip, highlighting the opportunity for
meaningful resource growth.
This nearest to surface intercept at Tom South, located approximately 145 m in elevation below
the historical exploration workings at Tom West, demonstrates the practicality of accessing this
mineralization within an underground mining environment. At Jason Main, the intercept represents
a significant step out down dip from previous drilling, establishing continuity beyond the currently
reported resource.
Results
Drill holes from Tom in this release are located in the southern portion of the Tom deposit near
the hinge of a moderately plunging anticline. All five holes completed intersected laminated to
massive sulphides consisting of sphalerite, galena, and barite. The high ratios of lead to zinc
(>1:1) in TS24- 001D4 and TS24- 002 likely represent higher temperature hydrothermal fluids
related to formation of mineralization, and therefore an increase in proximity to the heart of a
conceptual feeder structure, with TS24- 002 representing the nearest -to-surface and highest -
grade intercept at Tom South to date. A significant distance of approximately 200 m remains open
for testing up-dip of TS24-002 toward previous drilling. The broad, high-grade intercept in TS24-
001 (photo 1) illustrates that mineralization remains consistent along strike to the west from
intercepts in 2023.
One hole was drilled to completion at Jason Main (JS24- 002); and one hole abandoned due to
ground conditions at Jason South (JS24 -001). The intercept at Jason Main is a 143 m step out
down dip of previous drill hole JS17-005 and approximately 25 m down dip from the margin of the
defined Inferred resource. This intercept shows good continuity in both width and grade with the
intersections currently defining the resource at Jason Main.
Summaries of the intercepts from these holes discussed above are as follows:
• Hole TS24-002 Intersected 15.12 m (estimated true width of 10 m) of stratiform to massive
sulphide grading 10.39% Zn, 18.10% Pb , and 296.9 g/t Ag , including 8.15 m (estimated
true width 5.4 m) of 12.76% Zn, 22.44% Pb, and 361.4 g/t Ag.
This intercept represents the farthest up-dip intercept tested at Tom South and defines a
235 m continuous panel of mineralization betweenTS23- 001D3 and TS24-002 within
3
contemporary (2017–2024) drilling and 275 m in length down dip to TS90-012. This panel
remains open both up and down dip.
• Hole TS24-001 a step-out inter section of 18.15 m (estimated true width of 11 m) of
stratiform to massive sulphide grading 9.02% Zn, 7.46% Pb, and 148.3 g/t Ag, including
8.32 m (estimated true width of 5.0 m) grading 16.18% Zn, 13.52% Pb, and 278.8 g/t Ag,
and including 3.57 m (estimate true width of 2.2 m) grading 21.96% Zn , 23.67% Pb, and
518.6 g/t Ag.
• Hole TS24-001D4 intersected 6.20 m (estimated true width of 4.3 m) of stratiform to
massive sulphide grading 12.51% Zn, 12.06% Pb, and 191.1 g/t Ag, including 4.65 m
(estimated true width of 3.2 m) grading 14.83% Zn, 14.29% Pb, and 224.4 g/t Ag.
• Hole TS24-001D1 intersected 4.93 m (estimated true width of 3.2 m) of stratiform to
massive sulphide grading 12.11% Zn, 6.72% Pb, and 144.5 g/t Ag, including 3.65 m
(estimated true width of 2.4 m) grading 15.48% Zn, 8.71% Pb, and 183.6 g/t Ag.
• Hole TS24-001D3 intersected 2.58 m (estimated as true width ) of stratiform to massive
sulphide grading 8.58% Zn, 9.61% Pb, and 80.6 g/t Ag.
• Hole JS24-002 intersected 28.02 m (estimated true width of 8.3 m) of stratiform to semi-
massive sulphide grading 7.10% Zn, 1.41% Pb, and 5.6 g/t Ag, including 12.90 m
(estimated true width of 3.8 m) grading 11.3% Zn, 2.74% Pb, and 10.3 g/t Ag.
See Tables 1 to 3, Cross Sections TH–TH’ and JC–JC’, Long Sections TG–TG’ and JD–JD’, and
Maps 2, 3, and 4 below for further details.
The holes in this release are step out holes testing stratiform to massive sulphides at Tom South
and Jason Main. No 2024 drill holes are included in the current MRE2 and represent growth
potential above and beyond Fireweed’s current resource.
Next Steps
To date, the Company has released 25 of 49 holes drilled in 2024. The assay results and
interpretations for the remaining holes will be released as they are received, analyzed, and
confirmed by the Company.
Qualified Person Statement
Technical information in this news release has been reviewed and approved by Fireweed Metals
Senior Geologist, Ian Carr, P.Geo. (BC), a ‘Qualified Person’ as defined under Canadian National
Instrument 43-101 (“NI 43-101"). Mr. Carr is not independent of the Company in accordance with
NI 43-101.
About Fireweed
Fireweed is an exploration company focused on unlocking value in a new critical metals district
located in Northern Canada. Fireweed is 100% owner of the Macpass District, a large and highly
prospective 977 km2 land package. The Macpass District includes the Macpass zinc -lead-silver
project and the Mactung tungsten project. A Lundin Group company, Fireweed is strongly
positioned to create meaningful value.
Fireweed trades on the TSX Venture Exchange under the trading symbol “FWZ”, on the OTCQX
Best Market under the trading symbol “FWEDF”, and on the Frankfurt Stock Exchange under the
trading symbol “M0G”.
4
Additional information about Fireweed and its projects can be found on the Company’s website
at FireweedMetals.com and at www.sedarplus.com
ON BEHALF OF FIREWEED METALS CORP.
“Peter Hemstead”
CEO & Director
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined
in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy
of this release.
Data Verification
The diamond drill core logging and sampling program was carried out under a rigorous quality assurance /
quality control program using industry best practices. Drill intersections in this release are NQ2 size (50.5
mm/ 1.99-inch diameter), with recoveries typically above 85% unless otherwise noted in the results tables.
After drilling, core was cleaned, logged for geology, structure, and geotechnical characteristics, then
marked for sampling and photographed on site. Certain cores were selected for core scanni ng using light
detection and ranging (LiDAR), short-wave infrared (SWIR), X-ray fluorescence (XRF), and high resolution
RGB image capture. The cores for analyses were marked for sampling based on geological intervals with
individual samples two metres or less in length, with one metre samples within mineralized zones. Drill core
was cut lengthwise in half with a core saw; half-core was sent for assays reported in this news release, and
the other half is stored on site for reference. Bulk density was determined on site for the entire length of
each assay sample by measurement of mass in air and mass in water. Sample duplicate bulk density
determinations and in-house bulk density standard determinations were each made at a rate of 5%. Since
2017, four in-house bulk density standards (mineralized drill core from the Tom deposit that span a range
of densities) have been used and show an acceptable long- term precision. Certified standard masses are
used to calibrate the scale balance used for bulk density determinations.
A total of 5% assay standards or blanks and 5% core duplicates are included in the sample stream as a
quality control measure and are reviewed after analyses are received. Standards and blanks in 2024 drill
results to date have been approved as acceptable. Duplicate data add to the long- term estimates of
precision for assay data on the project and precision for drill results reported is deemed to be within
acceptable levels. Samples were sent to the Bureau Veritas (BV) preparation laboratory in Whitehorse,
Yukon, where the samples were crushed and a 500 g split was sent to the BV laboratory in Vancouver, B.C
to be pulverized to 85% passing 200 mesh size pulps. Clean crush material was passed through the crusher
and clean silica was pulverized between each sample. The pulps were analyzed by 1:1:1 Aqua Regia
digestion followed by Inductively Coupled Plasma Mass Spectrometry (ICP -ES/ICP-MS) multi -element
analyses (BV Code AQ270). All samples were also analyzed for multiple elements by lithium borate fusion
and X-ray fluorescence analysis (XRF) finish (BV Code LF725). Over-limit lead (>25.0%) and zinc (>24.0%)
were analyzed by lithium borate fusion with XRF finish (BV Code LF726). For BV samples, silver is reported
in this news release by method AQ270, and zinc and lead are reported by LF725 or LF726. Bureau Veritas
(Vancouver) is an independent, international ISO/IEC 17025:2017 accredited laboratory.
Assay values may appear rounded to one decimal place but are given in full in Table 1, and Cross Sections
where zinc and lead grades are reported to two decimal places.
Results in this news release are length and bulk-density weighted averages as would be used in a Mineral
Resource estimate. Length and bulk -density weighted averages have been reported as these most
accurately represent the average metal-content of the intersections.
True widths for primary intervals are estimated by measuring perpendicular to strike within the short axis of
a stratiform wireframe that has been constructed in 3D around the mineralized intercepts at Tom South
based on assay results, geological logging, stratigraphic correlation, and bedding measurements from
oriented core. The massive sulphide mineralization and laminated mineralization at Tom are stratiform
(oriented parallel to bedding), therefore the true width, or thickness, of the zone is estimated perpendicular
5
to both the strike and dip direction of bedding. True widths are rounded to the nearest metre for widths over
10 m and to the nearest 0.1 m for widths less than 10 m, as this better reflects the precision of the estimates.
True widths should be regarded as approximate as these are derived from an estimation that uses a
preliminary interpretation of the geological model. True widths for nested intervals (marked as “Including”
in results tables) are estimated using a ratio of included to primary intersected widths to attribute appropriate
portions of the true width of the primary interval to the nested intervals.
Cautionary Statements
Forward Looking Statements
This news release contains “forward- looking” statements and information (“forward- looking statements”).
All statements, other than statements of historical facts, included herein, including, without limitation,
statements relating to interpretation of drill results, targets for exploration, potential extensions of
mineralized zones, and the potential of the Company’s projects, are forward looking statements. Forward-
looking statements are frequently, but not always, identified by words such as "expects”, "anticipates”,
"believes”, "intends”, "estimates”, "potential”, "possible”, and similar expressions, or statements that events,
conditions, or results "will”, "may”, "could”, or "should” occur or be achieved. Forward- looking statements
are based on the beliefs of Company management, as well as assumptions made by and information
currently available to Company management and reflect the beliefs, opinions, and projections on the date
the statements are made. Forward- looking statements involve various risks and uncertainties and
accordingly, readers are advised not to place undue reliance on forward-looking statements. There can be
no assurance that such statements will prove to be accurate, and actual results and future events could
differ materially from those anticipated in such statements. Important factors that could cause actual results
to differ materially from the Company's expectations include but are not limited to, exploration and
development risks, unanticipated reclamation expenses, expenditure and financing requirements, general
economic conditions, changes in financial markets, the ability to properly and efficiently staff the Company’s
operations, the sufficiency of working capital and funding for continued operations, title matters, First
Nations relations, operating hazards, political and economic factors, competitive factors, metal prices,
relationships with vendors and strategic partners, governmental regulations and oversight, permitting,
seasonality and weather, technological change, industry practices, uncertainties involved in the
interpretation of drilling results and laboratory tests, and one- time events. The Company assumes no
obligation to update forward‐looking statements or beliefs, opinions, projections or other factors, except as
required by law.
Footnotes and References
1: For Tom, Jason, End Zone, and Boundary Zone Mineral Resources, see the technical report entitled “Technical
Report for NI 43-101, Macpass Project, Yukon, Canada” with effective date September 4th, 2024 filed on Sedar+ here
Pierre Landry, P.Geo. is independent of Fireweed Metals Corp., and a ‘Qualified Person’ as defined under Canadian
National Instrument 43-101. Pierre Landry, of SLR, is responsible for the Tom, Jason, End Zone, and Boundary Zone
Mineral Resource Estimates.
Contact: Alex Campbell
Phone: +1 (604) 689-7842
Email: [email protected]
6
Map 1: Macpass Project and Mactung Project locations
7
Map 2: Tom composite intervals in 2024 drilling and pre-2024 drilling with constrained resource projection
to surface
8
Map 3: Jason composite intervals in 2024 drilling and pre-2024 drilling with constrained resource
projection to surface