Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

FVL.TO ·

FREEGOLD TSX:FVL OTCQX: FGOVF Positive Metallurgical Results from Initial Testwork with Dundee Sustainable Technologies Highlights of GlassLock Process™ Performance

Metallurgy & Processing

FREEGOLD TSX:FVL OTCQX: FGOVF

Positive Metallurgical Results from Initial Testwork with Dundee

Sustainable Technologies

Highlights of GlassLock Process™ Performance

• Gold Concentrate Upgrade: The gold grade of the concentrate increased by 47%, reaching 24.7g/t Au, with no

measurable gold loss during the GlassLock Process™, and a direct-to-smelter saleable concentrate can be

produced

• Arsenic Reduction: Arsenic content was significantly lowered from 7.34% to 0.17%, representing a reduction of

over 98%.

• Sulphide Sulphur Reduction: Sulphide sulphur levels decreased from 28.8% to 20.8%, a 39% reduction.

• Environmental Characterization The primary byproduct produced by the GlassLock Process™ is a stable,

insoluble, arsenic-rich glass that has been characterized as non-toxic under the Environmental Protection

Agency’s Method 1311 Toxicity Characteristic Leaching Procedure.

Vancouver, BC, December 16th, 2025, Freegold Ventures Limited (TSX: FVL, OTCQX: FGOVF) (“Freegold”) is pleased to

announce further promising metallurgical results from its ongoing testwork on the Golden Summit Project, situated near

Fairbanks, Alaska. Earlier this year, Freegold undertook a metallurgical test program, which was completed by Dundee

Sustainable Technologies (DST), specifically designed to assess the effectiveness of DST’s GlassLock Process™ on material

sourced from the Golden Summit property. The results indicate that a saleable gold concentrate could be produced

directly from Golden Summit material, with over 98% of the arsenic removed and incorporated into a stable glass by-

product.

Test work Objectives:

1. Conduct preliminary laboratory testwork and complete characterization of sulphide concentrate material from

the Golden Summit Project.

2. Evaluate the technical feasibility and benefits of integrating DST’s GlassLock Process™ for arsenic removal and

stabilization.

3. Demonstrate the ability to produce a concentrate with broad marketability to various smelters and/or metal

traders.

Sample Preparation and Testing

To facilitate the evaluation, a 1-kilogram sample of gold-bearing sulphide concentrate was produced from locked-cycle

flotation testwork at BaseMet Labs from a composite from 12 drill holes of Golden Summit material. This sample was

shipped to DST, a subsidiary of Dundee Corporation (TSX: DC.A), for testing. The results of this program were extremely

positive and encouraging for Freegold as it advances the project through Pre-Feasibility. The success of this testwork

provides another avenue for consideration during the PFS.

Pre-Feasibility Study (“PFS”)

The Pre-Feasibility Study is being developed to support a strategic approach for the Golden Summit Project. Given the

resource's scale and the expected capital needs, the study will focus on phased development and thorough trade-off

analyses for evaluation. With positive metallurgical results already achieved from various processes, work is now

FREEGOLD TSX:FVL OTCQX: FGOVF

P

ositive Metallurgical Results from Initial Testwork with Dundee

Sustainable Technologies

2 | Page

advancing towards pilot-plant-scale testing to produce sufficient concentrate to continue optimizing the oxidation

methods. The three oxidation processes tested prior to the GlassLock Process™, have all shown recoveries exceeding

90%. Additionally, results from simple gravity and CIL methods suggest there is still potential to optimize a streamlined

metallurgical process in conjunction with the PFS.

The study will systematically explore different options, including alternative pit-shell configurations and metallurgical

recovery techniques. Current drilling efforts are aimed at infill drilling and defining a higher-grade starter pit. Ongoing

efforts to optimize the potential starter pit area and evaluate potential power supply trade-offs are ongoing. These

activities will run in parallel with geotechnical drilling when drilling resumes in February 2026.

Supporting studies, such as environmental, baseline, and archaeological assessments, are progressing well, while

metallurgical testing continues as a key part of the PFS flowsheet development.

In 2025, 62 drill holes were completed, with assay results still pending. Cutting and sampling of drill core will continue

through the winter break, and assays will be reported over the coming months. The data from the 2025 and early 2026

drilling programs will be used to revise the mineral resource estimate (MRE) published in July 2025, which indicated 17.2

million ounces at 1.24 g/t Au (indicated) and 11.9 million ounces at 1.04 g/t Au (inferred) using a 0.5 g/t cut off and a

gold price of US$2,490. The updated MRE and further drilling in 2026 will form the basis for the PFS, scheduled for

completion in early 2027.

The Qualified Person for this release is Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold,

who has approved the scientific and technical disclosure in this news release.

About Freegold Ventures Limited

Freegold is a TSX-listed company focused on exploration in Alaska.

For further information:

Kristina Walcott

President and CEO

Telephone: 1.604.662.7307

[email protected]

Some statements in this news release contain forward -looking information, including, without limitation, statements as to planned expenditures and exploration programs,

potential mineralization and resources, exploration results, the completion of an updated NI 43- 101 technical report, and any other future plans. These statements address

future events and conditions and, as such, involve known and unknown risks, uncertainties, and other factors which may cause the actual results, performance, or

achievements to be materially different from any future results, performance, or achievements expressed or implied by the statements. Such factors include, without

limitation, the completion of planned expenditures, the ability to complete exploration programs on schedule, and the success of exploration programs. See Freegold’s

Annual Information Form for the year ended December 31st, 202 4, filed under Freegold’s profile at www.sedar.com, for a detailed discussion of the risk factors associated

with Freegold’s operations.