Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

FUSE.V ·

Lico Reports Initial Results ON It’S 2018 Ontario Cobalt Exploration Program

Exploration Programs

1220-789 West Pender St

Vancouver BC V6C 1H2

Phone : (236) 521-0207

LiCoEnergyMetals.com

LICO REPORTS INITIAL RESULTS ON IT’S 2018

ONTARIO COBALT EXPLORATION PROGRAM

January 14, 2019: Vancouver, British Columbia; - LiCo Energy Metals Inc. (“the Company“ or “LiCo”) TSXV:

LIC, OTCQB: WCTXF is pleased to provide an initial report on the mineral assay results that have been

recently returned from 5 of 33 holes completed on its 2018 Diamond Drilling Exploration Program on its

Glencore-Bucke and Teledyne Cobalt Properties (the “Ontario Cobalt Properties”) located in Cobalt,

Ontario. During the late fall of 2018, LiCo completed a total of 4,272 m / 14,016 ft. of diamond drilling in

33 holes on both the Glencore-Bucke and Teledyne Cobalt Properties: 2,559 m / 8,396 ft. were completed

in 24 drill holes on the Glencore Bucke Property, and 1,713 m / 5,620 ft. in 9 drill holes on the Teledyne

Cobalt Property.

On the Glencore-Bucke Property, drill holes GB18-22 to GB18-40 (assays pending) tested the Northwest

and Main Zones with the intent of intersecting mineralized zones along strike and vertically above and

below previous intersections reported in the 2017 drilling program completed on the same properties.

To the east of the Main Zone, a single hole (GB18-41) was completed to test for mineralization at depth

beneath a historical trench and intersected anomalous cobalt mineralization. To the south, drill holes

GB18-42 to GB18-45 were completed in a fence 200 m south of recent drilling on the Main and North

West Zones (2017 and 2018 LiCo) in an area where no known historical drilling has been completed.

Highlights from diamond drill holes GB18-41 to GB18-45 include:

 GB18-44 0.26 % Co, 1.16% Cu over 3.15 m from 110.60 to 113.75 m, including 0.57% Co, 0.27%

Cu over 0.65 m from 110.60 to 111.25 m.

 GB18-44 0.17% Co, 4.21% Cu over 1.65 m from 113.00 to 114.65 m

 GB18-45 0.43% Cu, 1.04% Zn over 7.90 m from 104.00 to 111.90 m, including 2.01% Cu, 0.55% Zn

over 0.70 m from 109.00 to 109.70 m.

“We have recently completed the Phase 2 of our diamond drilling program on our Ontario Cobalt

Properties along with Surge Exploration Inc. This fulfils our 2018 flow-through obligations to the

shareholders. From these results, we are strongly encouraged and intend to continue targeting and

extending this exciting new development” states Mr. Rick Wilson, LiCo President & CEO. “LiCo

management believes that the results received so far from the 2018 exploration program are typical of

the area and the Ontario Cobalt camp generally. We are looking forward to receiving and reporting the

remaining results from the assay lab in the near future.”

The results for diamond drill hole GB18-41 to GB18-45 are summarized below in Tables 1 and 2.

Table 1: Summary of Diamond Drill Results

Diamond

Drill Hole

From

(m) To (m) Core

length (m)

Cobalt

(ppm)

Silver

(ppm)

Copper

(ppm)

Zinc

(ppm)

Lead

(ppm)

GB18-41 63.5 64.3 0.8 363 0.2 18 15 4

GB18-42 58.51 58.75 0.24 76 5.3 5270 41 15

GB18-42 98.5 99.77 1.27 570 1.4 102 61 5

GB18-43 104.5 106 1.5 355 0.6 720 91 11

GB18-44 10.5 11 0.5 139 0.2 7480 56 2

GB18-44 110.6 119 8.4 1104 9.4 10369 278 43

2

incl. 110.6 113.75 3.15 2633 11.1 11599 320 34

incl. 110.6 111.25 0.65 5690 3.8 2650 116 27

incl. 113 114.65 1.65 1730 34.8 42136 615 51

GB18-44 136.75 137.25 0.5 233 18.6 721 178 119

GB18-45 103 120 17 121 10.3 2399 5658 3734

incl. 104 111.9 7.9 127 17 4251 10427 5919

incl. 109 109.7 0.7 121 45.5 20100 5540 9800

Note: Intervals reported in Table 1 represent core lengths and not true widths.

Table 2: Drill hole Collar Information

DDH Easting Northing Azimuth Dip

GB18-41 604622.00 5252140.00 090 -42.0

GB18-42 604484.29 5251875.34 090 -45.0

GB18-43 604458.95 5251874.85 090 -45.0

GB18-44 604434.18 5251873.41 090 -45.0

GB18-45 604433.79 5251873.38 090 -57.0

QA/QC Program

LiCo Energy Metals Inc. has implemented a quality assurance/quality control (QA/QC) program for both

the Glencore-Bucke and Teledyne Property drill programs.

Diamond drill cores were logged, and where marked for sampling, split in half, with one half placed in a

labelled sample bag, and the remaining half placed back into the core tray and stored in a secured

compound. A blank and a standard were inserted in the assay sampling sequence at every 26 th and 27 th

place respectively. All samples were shipped to Activation Laboratories in Ancaster, Ontario. Each sample

was coarsely crushed and a 250 g aliquot is then pulverized and made ready for analysis. A 0.25g portion

of the pulverised material is digested with a near total digestion (4 acid) and then analyzed using an ICP.

QC for the digestion is 14% for each batch, 5 method reagent blanks, 10 in-house controls, 10 samples

duplicates, and 8 certified reference materials. An additional 13% QC is performed as part of the

instrumental analysis to ensure quality in the areas of instrumental drift. If over limits for Cu, Pb, Zn, and

Co are encountered, a sodium peroxide fusion, acid dissolution followed by ICP-OES is completed. Where

Ag over limits, a four-acid digestion is completed followed by ICP-OES.

Qualified Person

The technical content of this news release has been reviewed and approved by Joerg Kleinboeck, P.Geo.,

an independent consulting geologist and a qualified person as defined in NI 43-101.

About LiCo Energy Metals: https://licoenergymetals.com/

LiCo Energy Metals Inc. is a Canadian based exploration company whose primary listing is on the TSX Venture

Exchange. The Company's focus is directed towards exploration for high value metals integral to the

manufacture of lithium ion batteries.

Ontario Cobalt Properties: The Company has entered into an Option Agreement with Surge Exploration Inc.

(“Surge”) whereby Surge can earn an undivided 60% interest in the Glencore Bucke and the Teledyne Cobalt

Properties, located in Cobalt Ontario, subject to certain cash, share and exploration payments to LiCo. Upon

Surge having exercised the Option, Surge will have earned an undivided 60% interest in the Cobalt Properties,

and the parties will enter into a Commercially Reasonable and Definitive Joint Venture Agreement.

3

LiCo has received an independent third-party fairness opinion from an experienced and qualified P.Geo.

relating to the Cobalt Properties. The fairness opinion confirms and concludes the terms of the Option

Agreement between the Company and Surge is fair to the shareholders of the Company.

Chile Purickuta Lithium Project:

The Purickuta Project is located within Salar de Atacama, a salt flat encompassing 3,000 km2, being about 100

km long, 80 km wide and home to approximately 37% of the worlds Lithium production. The property of 160

hectares is enveloped by a concession owned by Sociedad Quimica y Minera (“SQM”) and lies, significantly,

within a few kilometers of the property of CORFO (the Chilean Economic Development Agency) where its leases

to both SQM and Albermarle’s Rockwood Lithium Corp Together these two companies have combined

production of over 62,000 tonnes of LCE (Lithium Carbonate Equivalent) annually making up 100% of Chile’s

current lithium output. The unique characteristics of Salar de Atacama make finished lithium carbonate easier

and cheaper to produce than any of its peer group globally.

The Purickuta Property is currently under Force Majeure as mentioned in previous news releases.

Nevada Black Rock Desert Lithium Project:

The Company has entered into an option agreement whereby the Company may earn an undivided 100%

interest, subject to a 3% NSR, in the Black Rock Desert Lithium Project in southwest Black Rock Desert, Washoe

County, Nevada.

On Behalf of the Board of Directors

“Rick Wilson”

Rick Wilson, President &CEO

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of

the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Disclaimer for Forward-Looking Information:

This news release may contain forward-looking statements which include, but are not limited to, comments

that involve future events and conditions, which are subject to various risks and uncertainties. Except for

statements of historical facts, comments that address resource potential, upcoming work programs, geological

interpretations, receipt and security of mineral property titles, availability of funds, and others are forward-

looking. Forward-looking statements are not guarantees of future performance and actual results may vary

materially from those statements. General business conditions are factors that could cause actual results to

vary materially from forward-looking statements.