Fury Drills 9.36 g/t Gold Over 3 Metres at the Hinge Target at Eau Claire
www.furygoldmines.com
Fury Drills 9.36 g/t Gold Over 3 Metres at the Hinge Target at
Eau Claire
Vancouver, Canada – November 29, 2021 – Fury Gold Mines Limited (TSX: FURY, NYSE
American: FURY) (“Fury” or the “Company”) is pleased to provide results for six core drill holes at
the Eau Claire project located in the Eeyou Istchee Territory in the James Bay region of Quebec . The
drilling focused on demonstrating the potential to expand the deposit to the west on both the Hinge and
Limb target areas (Figure 1). Drill hole 21EC-041 targeted the Hinge zone of the anticline that defines
the geometry of the deposit and the interbedded magnesium and iron-rich basaltic units that host the
majority of the resource. The drill hole intersected seven zones of mineralization over a 110 -metre drill
width, including 3.0 metres (m) of 9.36 g/t gold, 3.0m of 3.38 g/t gold and 1.5m of 4.94 g/t
gold. The multiple stacked zones of mineralization demonstrate that the deposit is open down plunge
to the west and is situated approximately 100m below the defined resource at the deposit (Figure 2).
Fury believes that the down plunge extension of the Eau Claire deposit has the potential to significantly
expand the current resource.
"This has been a very busy year for Fury , and we are thrilled to share results from multiple summer
exploration programs as we get ready for exploration in 2022,” commented Tim Clark, CEO of Fury. “Hole
21EC-041 is a great result and certainly gives us confidence that this resource has room to grow . The
Hinge is a high priority target, and this intercept opens up the Eau Claire deposit for considerably more
exploration to the west.
“Over the next few weeks, we are also looking forward to publishing additional drilling results from both
Committee Bay and Snake Lake. This will be followed by news from surface programs intended to help
establish drill programs at Percival, Serendipity and the Eleonore South JV, which will all be important as
we refine our exploration plans for the coming year.”
Hinge Zone Target
The Hinge target located to the west of the defined Eau Claire resource is defined by a 20- to 30-degree
plunge of the anticline that defines the geometry of the deposit. The plunging anticline is interpreted to
extend approximately one kilometre to the west based on geologic mapping and geophysical data that
demonstrates a plunging conductivity anomaly that images the sediments hosted in the core of the fold
(Figure 2). To date a total of four drill holes have tested the Hinge geometry of the Eau Claire anticline
within the interbedded magnesium and iron rich basaltic units that host the bulk of the resource at the
Eau Claire deposit. The results of these four drill holes demonstrates the potential to discover multiple
stacked h igh-grade veins as evidenced by the 3m of 9. 36 g/t gold and the previously announced
intersection of 1m of 12.81 g/t in drill hole 21EC-032 (see news release dated August 4th, 2021). Fury’s
technical team is currently planning the next series of drill hol es into the Hinge zone with drill fences
across the Hinge zone being planned on 50m to 100m step outs to the west (Figure 2).
“The multiple stacked zones of mineralization encountered in the Hinge zone target are similar to those
found in the most robust areas of the Eau Claire resource,” commented Michael Henrichsen, SVP,
Exploration, Fury. “Given the clear down plunge potential of the Hinge zone and the high -grades
www.furygoldmines.com
encountered this target area provide the potential to deliver a significant increase to the resource to the
west.”
Western Limb Results
Seven drill holes targeted the direct extension of the 450-zone mineralization at the Limb target (Figure
2). All drill holes intersected stacked zones of quartz tourmaline veining proximal to quartz porphyry
dykes that are consistent geologically with mineralization within the Eau Claire resource. Although no
high-grade intercepts of mining width were encountered in the drilling the hydrothermal system remains
open and the Company is further evaluating Limb targets further to the west. Complete drill results are
presented below for both the Hinge and Limb targets.
Table 1: Eau Claire Drill Results
Location Hole ID From To Length
(m) Au (g/t)
Western Hinge
Target 21EC-041
222.5 228.5 6 1.40
237.5 240.5 3 3.38
252.5 254 1.5 1.47
314 317 3 9.36
320 321.5 1.5 4.94
525.5 527 1.5 2.21
572 576 4 1.23
Western Limb
Target
21EC-036 626 626.5 0.5 5.40
829 830.5 1.5 3.76
21EC-037 No Significant Intersections
21EC-038 643 644 1 3.93
650 651 1 2.35
21EC-039 984 985 1 3.82
21EC-040 568 569.5 1.5 5.31
Main intervals - Au grade*thickness no less than 2g/t*m with grade is no less than 1g/t, maximum consecutive dilution 2m;
Lengths are drill indicated core length, as insufficient drilling has been undertaken to determine true widths at this time.
Fury’s technical team views the results from the limited drilling completed to date at both the Hinge and
the Limb targets as very encouraging. Every drill hole intersected quartz tourmaline veining consistent
with what is observed at the Eau Claire deposi t confirming that the mineralized system and more
importantly the prospective interbedded magnesium and iron rich basalts remain open to the west. Drill
hole 21EC-041 is the furthest west hole completed to date beneath the 850 zone, this hole has extended
resource grade mineralization a further 100m to the west of Fury’s previous drilling and 80m below
previously identified mineralization at the 850 zone.
www.furygoldmines.com
Figure 1: Plan view of the Eau Claire Deposit area illustrating the folded interbedded magnesium and iron rich
basalt unit in blue as well as the trace of the Fold Hinge plunging to the west which remains open. Drill holes
completed by Fury are also depicted.
www.furygoldmines.com
Figure 2: Illustrates the intercepts at the western Fold Hinge target at the Eau Claire deposit as highlighted by
the orange dashed ovals.
Technical Disclosure
Analytical samples for the Drill Program were taken by sawing HQ diameter core into equal halves on
site with one half sent to ALS Chemex in Val D’or, QC for preparation and analysis. All samples were
assayed using a 50 g nominal weight fire assay with ind uctively coupled plasma – atomic emission
spectrometry finish (Au-ICP22) and multi-element four acid digest ICP-AES/ICP-MS method (ME-MS61).
Where Au-ICP22 results were greater than 0.5 ppm Au the assay w as repeated with a 50 g nominal
weight fire assay with atomic absorption finish (Au-AA24). Samples containing more than 5 ppm by Au-
AA24 were re-assayed with 50 g nominal weight fire assay with gravimetric finish (Au -GRA22). QA/QC
programs using internal sta ndard samples, field and lab duplicates and blanks indicate good overall
accuracy and precision.
David Rivard, P.Geo, Exploration Manager at Fury, is a "qualified person" within the meaning of Canadian
mineral projects disclosure standards instrument 43-101 and has reviewed and approved the technical
disclosures in this press release.
About Fury Gold Mines Limited
Fury Gold Mines Limited is a Canadian-focused exploration and development company positioned in three
prolific mining regions across the country. Led by a management team and board of directors with proven
success in financing and developing mining assets, Fury will aggressively grow and advance its multi -
million-ounce gold platform through careful project assessment and exploration excellence . Fury is
committed to upholding the highest industry standards for corporate governance, environmental
stewardship, community engagement and sustainable mining. For more information on Fury Gold Mines,
visit www.furygoldmines.com.
www.furygoldmines.com
For further information on Fury Gold Mines Limited, please contact:
Salisha Ilyas, Vice President, Investor Relations
Tel: (437) 500-2529
Email: [email protected]
Website: www.furygoldmines.com
Forward-Looking Information and Additional Cautionary Language
This release includes certain statements that may be deemed to be "forward -looking information" or
"forward-looking statements" within the meaning of applicable securities laws, which relate to the future
operations of the Company and other statements that are not historical facts. Generally, these forward-
looking statements can be identified by the use of forward -looking terminology such as "plans",
"expects", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates", or "believes". Specific
forward-looking information contained in this release primarily relates to statements that suggest that
future work at Eau Claire will potentially increase the known resources.
There can be no assurance that such statements will prove to be accurate, and actual results and future
events could differ materially. Although the Company believes that the assumptions and expectations
reflected in those forward-looking statements were reasonable at the time such statements were made,
there can be no assurance that such assumptions and expectations will prove to be correct. Exploration
is a high-risk enterprise.
Readers should refer to the risks discussed in the Company's Annual Information Form and MD&A for
the year ended December 31, 2020 and subsequent continuous disclosure filings with the Canadian
Securities Administrators available at www.sedar.com and the Company's Annual Report including the
Base Shelf Prospectus available at www.sec.gov. Readers should not place heavy reliance on forward-
looking information, which inherently can only as of the date made.
Cautionary Note to United States Investors Concerning Estimates of Mining Disclosure
The mining and technical d isclosure throughout this release is made in accordance with applicable
Canadian law and the guidelines set out in the Canadian Institute of Mining, Metallurgy and Petroleum
("CIM"). The Company's descriptions of its projects using applicable CIM Standards may not be
comparable to similar information made public by U.S. companies subject to the reporting and disclosure
requirements under the United States federal securities laws.
- End -