Auryn Advances High-Grade Gold Targeting at Committee Bay
Auryn Advances High-Grade Gold Targeting at Committee Bay
Vancouver, Canada – May 20th, 2020 – Auryn Resources Inc. (TSX: AUG, NYSE American: AUG)
(“Auryn” or the “Company”) is pleased to announce a significant advancement in targeting high-grade
gold mineralization at the 100% owned Committee Bay gold project in Nunavut.
Auryn’s technical team analyzed recent and historical drill results from across the 300 -kilometer
greenstone belt and differentiated the geophysical conductivity responses between high-grade and low-
grade mineralization. This led to revisiting a number of high potential targets across the belt that are
characterized by strong gold -in-till anomalies and high -grade gold in outcrop or boulder trains , where
historical drilling has not yet explained the extensive high-grade occurrences. In addition, undrilled targets
were identified that have both high -grade boulder and outcrop rock samples as well as conductivity
responses that are consistent with observed high-grade mineralization in other areas of the belt.
A Message from Ivan Bebek, Executive Chairman & Director:
“The Committee Bay gold project represents one of the premier gold belts globally. In the past four years
we have come progressively closer with the successful drilling of multiple gold zones on the 300-kilometer
trend, however, we have yet to drill the high-grade sources. Our most recent efforts last year led us to an
instrumental breakthrough in targeting high-grade mineralization, which we are very excited to pursue as
the gold price continues to rise.”
Advanced Targeting Process:
The process of evaluating conductivity responses across the belt and correlating to gold grade has led
Auryn to reinterpret both magnetics and geological data with the following results:
• A new understanding of shallowly plunging structural geometries associated with fold hinge zones
that are favorable for hosting high-grade mineralization.
• An understanding of the relevance of the highest conductivity responses in each rock type that
has the potential to correspond with high -grade mineralization based on sulphidation of the host
rock.
Auryn has applied this approach to the southwestern third of the belt and identified two significant fold
hinge targets that have not been drilled at the Anuri and Amautik prospects (Figure 1). The technical
team believes that the identification of shallowly plunging fold hinge zones is a critical step in targeting
high-grade mineralization where strong gold-in-till anomalies and high-grade rocks in outcrop or boulder
trains are in support of the newly identified targets.
Target Summary:
The fold hinge zone target that has been identified at the previously drilled Anuri prospect is characterized
by the strongest gold-in-tills signature from across the belt as well as several high-grade boulder trains
(Figures 1 & 2 ). Re-interpretation of the electro -magnetic conductivity responses, magnetics and
geological data has yielded a flat lying, overturned recumbent fold geometry where the main fold hinge
target zone is buried at depth (Figure 2). Both boulder trains and previous drill intercepts are interpreted
to be associated with the limbs of this fold that are believed to represent the lower grade portions of the
mineralized system.
The second fold hinge target that has been identified is at the undrilled Amautik prospec t, which is
characterized by conductivity responses consistent with other high -grade drilling on the Committee Bay
belt. The geology at this prospect corresponds with a folded iron formation with strong geochemistry in
rock samples with up to 15.7 g/t gold sourced from the hinge zone of the fold (Figure 3).
Both the Anuri and Amautik prospect fold hinges will be advanced to drill stage by conducting ground-
based geophysical induced polarization surveys to identify areas of high chargeab ility that coincide with
high conductivity responses.
A Message from Michael Henrichsen, COO & Chief Geologist:
“Over the past four exploration seasons we have built an incredible data set that has looked at the belt
holistically. This has allowed us to identify the most important factors that produce high -grade
mineralization versus low -grade mineralization across the belt. In addition, we have had a key
breakthrough in identifying a new style of structural geometry , where potential fold hinge zones a re
plunging shallowly and are not necessarily exposed on surface. We believe our targets share geometries
similar to those observed at the Meadowbank and Amaruq deposits and look forward to our future drill
programs.”
Figure 1: Illustrates the position of the Anuri and Amautik targets within the southwestern third of the Committee Bay gold belt.
Figure 2: Illustrates a series of shallowly plunging fold hinges at the Anuri prospect that are buried at shallow depth and represent
the primary targets for high -grade mineralization. These target areas will be advanced to drill stage with ground -based
geophysical induced polarization surveys.
Figure 3: Illustrates the undrilled fold hinge at the Amautik prospect
Michael Henrichsen, P.Geo, COO of Auryn, is the Qualified Person who assumes responsibility for the
technical disclosures in this press release.
ON BEHALF OF THE BOARD OF DIRECTORS OF AURYN RESOURCES INC.
Ivan Bebek
Executive Chairman and Director
For further information on Auryn Resources, please contact Natasha Frakes , Manager of Corporate
Communications at (778) 729-0600 or [email protected].
About Auryn
Auryn Resources is a technology -driven junior exploration company focused on finding and advancing globally significant
precious and base metal deposits. The Company has a portfolio approach to asset acquisition and has s ix projects, including
two flagships: the Committee Bay high-grade gold project in Nunavut and the Sombrero copper -gold project in southern Peru.
Auryn’s technical and management teams have an impressive track record of successfully monetizing assets for all stakeholders
and local communities in which it operates. Auryn conducts itself to the highest standards of corporate governance and
sustainability.
Committee Bay Drilling QA/QC Disclosure
CB Grabs:
Approximately 1-2kg of material was collected for analysis and sent to ALS Lab in Vancouver, BC for preparation and analysis.
All samples are assayed using 50g nominal weight fire assay with atomic absorption finish (Au-AA26) and multi-element four
acid digest ICP-AES/ICP-MS method (ME-MS61). QA/QC programs for rock grab samples using internal standard samples,
lab duplicates, standards and blanks indicate good accuracy and precision in a large majority of standards assayed. Grab
samples are selective in nature and cannot be consider as representative of the underlying mineralization.
Forward Looking Information and Additional Cautionary Language
This release includes certain statements that may be deemed “forward -looking statements”. Forward -looking information is
information that includes implied future performance and/or forecast information including information relating to or associated
with the acquisition and title to mineral concessions. These statements involve known and unknown risks, uncertainties and
other factors which may cause actual results, performance or achievements of the Company to be materially different (either
positively or negatively) from any future results, performance or achievements expressed or implied by such forward -looking
statements. Readers should refer to the risks discussed in the Company’s Annual I nformation Form and MD&A for the year
ended December 31, 2019 and subsequent continuous disclosure filings with the Canadian Securities Administrators available
at www.sedar.com and the Company’s registration statement on Form 40-F filed with the United States Securities and Exchange
Commission and available at www.sec.gov.
Disclaimer
The Toronto Stock Exchange has not reviewed and does not accept responsibility for the adequacy or accuracy of this release.