FPX Nickel Plans Step-Out Drilling Program to Test Expansion of Significant New Nickel Discovery at Van Target
Suite 620 – 1155 West Pender
Street
Vancouver, BC Canada V6E 2P4
Tel: 604.681.8600
e-mail: [email protected]
FPX Nickel Plans Step-Out Drilling Program to Test Expansion of
Significant New Nickel Discovery at Van Target
Vancouver, May 24, 2022 – FPX Nickel Corp. (FPX-TSX.V) (“FPX” or the “Company”) is pleased to
provide an overview of our planned 2022 exploration drilling program at the Company’s Decar Nickel
District (“ Decar”) in central British Columbia. This year’s drilling will focus on expansion of
mineralization at the Van Target, where an initial drilling program in 2021 confirmed a major new discovery
and suggested the potential for Van to host a large-scale, standalone nickel deposit which could rival the
deposit already delineated at Decar’s Baptiste Deposit.
Highlights
• Widely-spaced, 8 -10 hole program to step -out up to 1 km south, southwest and west of 2021
discovery holes
• 2021 Van holes defined a large zone of strong awaruite nickel mineralization approximately 400
to 750 m wide and up to 750 m long, to downhole depths of up to 350 m, with these results
comparing favourably to the mineralized area defined by outcrop sampling and subsequent drilling
at Baptiste
• 2022 program to follow the trend of increasing grade and thickness to the south and west as
observed in drill sections from the 2021 program , and to test strong Davis Tube Recoverable
(“DTR”) nickel occurrences in outcrops to the southwest
“We are very excited to test the expansion of the new discovery at Van, where the first seven holes in 2021
all return ed broad intervals of strong awaruite nickel mineralization,” comment ed Martin Turenne, the
Company’s President and CEO. “The 2021 campaign tested less than 50% of the 2.5 km2 target area, which
had been initially defined by outcrop samples. This year’s program will test the western half of the outcrop-
defined target area, and prob e the expansion of mineralization to the south of the 2021 holes, in an
overburden-covered zone where no outcrop is available.”
Step-out exploration drilling at the Van Target is planned to build on the successful 2021 maiden
exploration drilling results. This year’s program will comprise approximately 3,000 metres of drilling over
8-10 holes, stepping out meaningfully to the south, southwest and west of the holes drilled in 2021.
This year’s hole locations are informed by the 2021 drill results, ground magnetics, regional magnetics ,
outcrop mapping, outcrop samples, and preliminary geological modelling of the target area. The planned
holes will focus on exploration to the south, southwest, and west of the 2021 holes, as indicated in Areas 1
and 2 of Figure 2, respectively.
Area 1, which extends up to 500 m south of the 2021 holes, has been selected to follow the trend of
increasing grade and thickness to the south as observed in sections drilled during the 2021 program. Area
2, which extends up to 1 km west of the 2021 holes, has been selected to similarly follow the trend of
increasing grade and thickness along strike to the west, as well as strong DTR nickel occurrences in outcrops
to the southwest.
Figure 1: Decar Nickel District – Previous Drill Hole Locations at Baptiste, Van, Sid and B Target
Figure 2: Van Target – Areas of Focus for 2022 Drill Program
Drilling at Van is expected to occur over an approximate six -week period commencing in late June, and
will be based on a combination of skid- and helicopter-supported setups.
In 2021, the Company executed a maiden nine -hole, 2,688 m drill program at the Van Target, which is
located 6 km north of Baptiste at a similar elevation, and accessible via active logging roads . Maiden
drilling at Van tested the sub -surface potential for mineralization below and adjacent to prospective
mineralized outcrop, which had defined a target area of approximately 2.5 km2. The size of the Van Target
as defined by this outcrop sampling is comparable to the Baptiste deposit, which measures 3 km along strike
with widths of up to 1 km.
The three southernmost of the Van holes (21VAN-002, 21VAN-003 and 21VAN-005) returned among the
10 highest-grading, near-surface intervals in the history of Decar, suggesting that Van has strong potential
to host a higher-grade, near-surface resource than that found at Baptiste, where the majority of higher-grade
mineralization occurs at depth. For a complete description of 2021’s successful maiden exploration drilling
program at the Van Target, see the Company’s news release dated January 6th, 2022.
Erin Wilson, P. Geo., FPX Nickel’s Qualified Person under NI 43-101, has reviewed and approved the
technical content of this news release.
About the Decar Nickel District
The Company’s Decar Nickel District claims cover 245 km 2 of the Mount Sidney Williams
ultramafic/ophiolite complex, 90 km northwest of Fort St. James in central British Columbia. The district
is a two-hour drive from Fort St. James on a high-speed logging road.
Decar hosts a greenfield discovery of nickel mineralization in the form of a naturally occurring nickel-iron
alloy called awaruite (Ni3Fe), which is amenable to bulk-tonnage, open-pit mining. Awaruite mineralization
has been identified in four target areas within this ophiolite complex, being the Baptiste Deposit, and the
B, Sid and Van targets, as confirmed by drilling , petrographic examination, electron probe analyses and
outcrop sampling on all four targets. Since 2010, approximately US $2 8 million has been spent on the
exploration and development of Decar.
Of the four targets in the Decar Nickel District, the Baptiste Deposit, which was initially the most accessible
and had the biggest known surface footprint, has been the focus of diamond drilling since 2010, with a total
of 99 holes and 33,700 m of drilling completed. The Sid target was tested with two holes in 2010 and the
B target had a single hole drilled in 2011; all three holes intersected nickel -iron alloy mineralization over
wide intervals with DTR nickel grades comparable to the Baptiste Deposit. The Van target was not drill -
tested at that time as bedrock exposures in the area were very poor prior to more recent logging activity. In
2021, the Company executed a maiden drilling program at Van , which has returned promising results
comparable with the strongest results at Baptiste.
About FPX Nickel Corp.
FPX Nickel Corp. is focused on the exploration and development of the Decar Nickel District, located in
central British Columbia, and other occurrences of the same unique style of naturally occurring nickel-iron
alloy mineralization known as awaruite. For more information , please view the Company’s website at
www.fpxnickel.com or contact Martin Turenne, President and CEO, at (604) 681 -8600 or
On behalf of FPX Nickel Corp.
"Martin Turenne"
Martin Turenne, President, CEO and Director
Forward-Looking Statements
Certain of the statements made and information contained herein is considered “forward -looking
information” within the meaning of applicable Canadian securities laws. These statements address future
events and conditions and so involve inherent risks and uncertainties, as disclosed in the Company's
periodic filings with Canadian securities regulators. Actual results could differ from those currently
projected. The Company does not assume the obligation to update any forward-looking statement.
Neither the TSX Venture Exchange nor its Regulation Services Provider accepts responsibility for the
adequacy or accuracy of this release.