First Mining Intersects 5.34 G/T Au Over 21.5 Metres at Goldund Property
First Mining Intersects 5.34 G/T Au Over 21.5 Metres at Goldund Property
VANCOUVER, BC / ACCESSWIRE / September 20, 2018 / First Mining Gold Corp. ("First
Mining" or the "Company") (OTCQX: FFMGF, TSX: FF, FSE: FMG) is pleased to announce final fire
assay results and partial metallic screen fire assay results for eight drill holes completed to date on the
Miller prospect at the Company's wholly-owned Goldlund property ("Goldlund") in northwestern Ontario,
Canada. Previously the Company had released fire assay results for the first six drill holes of the eight
hole campaign at the Miller prospect (see the Company's news release dated August 20, 2018).
Drilling Highlights:
• Hole MI-18-007 intersected 49.0 metres ("m") of 2.49 grams per tonne gold ("g/t Au")
o including 21.5 m of 5.34 g/t Au
o and including 1.0 m of 89.21 g/t Au
o and 3.0 m of 4.24 g/t Au
• Hole MI-18-008 intersected 14.0 m of 0.62 g/t Au
o including 2.5 m of 1.80 g/t Au
Note: Assaying for the Miller drill program is being done by SGS Canada Inc. ("SGS") at their
laboratories in Red Lake, Cochrane and Lakefield, Ontario. Reported widths are drilled core lengths;
true widths are unknown at this time. Assay values are uncut.
Jeff Swinoga, President and Chief Executive Officer of First Mining, stated, "We are excited with the
continued drilling success of our Goldlund regional exploration program, indicating the potential for
significant gold mineralization 10 kilometres from the initial gold discovery. This new discovery is
encouraging in light of the property's 50 kilometre strike length. These two new reported holes, located at
the Miller prospect, have both encountered gold mineralization, with several visible gold occurrences
similar to the first six drill holes. The early results from the Miller prospect indicate that the entire width
of the sill/dyke appears receptive to gold mineralization and this mineralization remains open along strike
in both directions and also at depth."
Due to the coarse, nuggety nature of the gold mineralization present within the Goldlund deposit and its
surrounding regional targets, the initial fire assay results from the Miller prospect have been followed up
with a program of metallic screen fire assays on select samples. Samples were chosen for metallic screen
analysis either where visible gold mineralization ("VG") was observed in the core, or adjacent to VG
occurrences, or where the initial fire assay results did not appear to be representative of the level of gold
mineralization observed in the core. A larger sample size of 1,000 grams ("g") is being utilized for these
metallic screen fire assays (as compared with the 50 g sample size that was used for the fire assays).
A comparison of the results of the initial fire assay program with the fire assay results incorporating the
metallic screen fire assay re-runs is presented in Table 1 below.
Table 1. Drill Hole Assay Results (including Metallic Screen Fire Assay Results) from the Miller
Prospect
Hole ID From (m) To (m) Length (m) Au g/t (Fire
Assay only)*
Au g/t (Fire Assay inc.
Metallics)
MI-18-001 MI-18-001 7.0 114.6 107.6 0.33 0.42
inc 15.0 88.6 73.6 0.41 0.55
inc 16.0 18.3 2.3 1.93 2.01
and inc 18.0 18.3 0.3 8.59 9.15**
and inc 23.3 29.6 6.3 0.91 2.01**
and inc 27.3 27.6 0.3 8.67 32.12**
and inc 77.6 88.6 11.0 1.17 1.43
and inc 87.6 88.6 1.0 6.27 9.09
MI-18-002
MI-18-002 0.42 142.5 142.08 1.90 1.90**
inc 1.5 109.5 108.0 2.44 2.43**
and inc 57.5 88.5 31.0 4.44 further results pending
and inc 75.5 82.5 7.0 14.67 further results pending
and inc 81.5 82.5 1.0 88.80 metallics not requested
and inc 102.5 109.5 7.0 9.60 further results pending
and inc 108.5 109.5 1.0 54.47 metallics not requested
MI-18-003
MI-18-003 69.0 72.0 3.0 1.12 1.19**
and 90.0 138.0 48.0 1.07 1.17**
inc 90.0 90.5 0.5 17.23 16.10**
and inc 94.0 97.5 3.5 2.28 2.41**
and inc 105.0 106.0 1.0 3.90 metallics not requested
and inc 115.0 130.0 15.0 1.41 1.71
and inc 125.0 125.5 0.5 10.55 19.10**
and inc 137.7 138.0 0.3 9.87 11.80**
MI-18-004
MI-18-004 34.0 57.8 23.8 0.54 metallics not requested
inc 34.0 35.0 1.0 2.56 metallics not requested
and inc 52.0 57.8 5.8 1.40 metallics not requested
and inc 55.0 56.0 1.0 6.12 metallics not requested
MI-18-005
MI-18-005 46.0 47.0 1.0 4.18 metallics not requested
and 68.0 78.0 10.0 0.43 0.45**
and inc 72.0 74.0 2.0 1.25 metallics not requested
and 109.0 110.0 1.0 1.00 metallics not requested
MI-18-006
MI-18-006 76.0 77.0 1.0 1.38 metallics not requested
and 102.0 124.0 22.0 0.69 0.68
inc 103.0 109.4 6.4 2.09 2.08**
and inc 103.62 104.0 0.38 21.66 20.80**
and inc 109.0 109.4 0.4 4.69 5.37
and 145.0 147.0 2.0 1.48 metallics not requested
and 169.0 170.0 1.0 3.01 metallics not requested
MI-18-007 MI-18-007 66.0 69.0 3.0 4.24 metallics not requested
inc 66.0 67.0 1.0 9.16 metallics not requested
and 89.0 138.0 49.0 2.53 2.49**
inc 94.5 116.0 21.5 5.43 5.34**
and inc 107.5 109.0 1.5 8.83 9.29
and inc 114.0 115.0 1.0 91.41 89.21**
MI-18-008 MI-18-008 135.0 149.0 14.0 0.58 0.62**
inc 135.5 138.0 2.5 1.59 1.80**
and inc 146.0 147.0 1.0 2.14 metallics not requested
*Fire assay results for holes MI-18-001 to MI-18-006 (inclusive) were reported in the Company's
previous news release dated August 20, 2018.
**Additional metallic screen fire assay re-runs still underway
In addition to drilling the Miller prospect, the Company has completed seven diamond drill holes at the
Eaglelund prospect, and one diamond drill hole at the Miles prospect (see Figure 1 below), for a total
2018 summer regional drill program of 688 metres. This completes this phase of the Company's regional
drill program at Goldlund, and assaying is currently underway for these eight holes.
Figure 1. Plan Map
Table 2. Drill Hole Locations for the Miller Prospect
Hole ID Azimuth ° Dip ° Length (m) UTM East UTM North Section
MI-18-001 140 -80 140.5 554522 5533533 NW-50
MI-18-002 140 -85 200.0 554540 5533551 NW-100
MI-18-003 140 -55 170.0 554521 5533611 NW-100
MI-18-004 140 -55 101.0 554465 5533537 NW-00
MI-18-005 320 -65 110.0 554488 5533458 NW-00
MI-18-006 320 -65 170.0 554536 5533480 NW-50
MI-18-007 320 -60 182.0 554614 5533530 NW-150
MI-18-008 320 -60 182.0 554634 5533557 NW-150
Collar coordinates reflect final surveyed locations.
Figure 2. Cross-Section through the Miller Prospect
QA/QC Procedures
The QA/QC program for the 2018 regional drilling programs at Miller, Eaglelund and Miles consists of
the submission of duplicate samples and the insertion of certified reference materials and blanks at regular
intervals. These are inserted at a rate of one standard for every 20 samples (5% of total) and one blank for
every 30 samples (3% of total). The standards used in the 2018 regional drilling program consist of 5
different gold grades ranging from 1 to 9 g/t Au, and are sourced from CDN Resource Laboratories in
Langley, BC. Blanks have been sourced locally from barren granitic material.
Field duplicates from quartered core, as well as 'coarse' or 'pulp' duplicates taken from coarse reject
material or pulverized splits, are also submitted at regular intervals with an insertion rate of 4% for field
duplicates and 4% for coarse or pulp duplicates. Additional selected duplicates are being submitted to an
umpire lab for check assaying. SGS also undertake their own internal coarse and pulp duplicate analysis
to ensure proper sample preparation and equipment calibration.
Dr. Chris Osterman, P.Geo., COO of First Mining, is the "qualified person" for the purposes of National
Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101") and he has reviewed and
approved the scientific and technical disclosure contained in this news release.
ABOUT THE GOLDLUND PROJECT
The Goldlund deposit is situated within a land package of approximately 280 square kilometres (28,000
hectares) referred to as the Goldlund Gold Project. The Property has a strike-length of over 50 kilometres
in the Wabigoon Subprovince. Goldlund is an Archean lode-gold project located in northwestern Ontario,
approximately 60 kilometres from the township of Dryden. The claims that make up the land package
cover the historic Goldlund and Windward mines.
On January 9, 2017, the Company announced an initial mineral resource estimate for Goldlund that was
prepared by WSP Canada Inc. in accordance with NI 43–101. At a 0.4 g/t Au cut-off grade, the Goldlund
deposit contains pit constrained Indicated Resources of 9.3 million tonnes at 1.87 g/t Au, or 560,000
ounces of gold. At a 0.4 g/t Au cut-off grade, the Goldlund deposit contains pit constrained Inferred
Resources of 40.9 million tonnes at 1.33 g/t Au, or 1,750,000 ounces of gold. The technical report for this
resource estimate, which is titled "Technical Report and Resource Estimation Update on the Goldlund
Project" and is dated February 7, 2017, is available under the Company's SEDAR profile
at www.sedar.com, and is also available on the Company's website at www.firstmininggold.com.
ABOUT FIRST MINING GOLD CORP.
First Mining Gold Corp. is an emerging development company with a diversified portfolio of gold
projects in North America. Having assembled a large resource base of 7 million ounces of gold in
the Measured and Indicated categories and 5 million ounces of gold in the Inferred category in
mining friendly jurisdictions of eastern Canada, First Mining is now focused on advancing its assets
towards production. The Company currently holds a portfolio of 24 mineral assets in Canada, Mexico and
the United States.
For further information, please contact Jeff Swinoga, President and CEO at 416-816-0424, or Derek
Iwanaka, Vice President of Investor Relations at 604-639-8824, or visit our website
at www.firstmininggold.com.
ON BEHALF OF FIRST MINING GOLD CORP.
"Keith Neumeyer"
Keith Neumeyer
Chairman
Cautionary Note Regarding Forward-Looking Statements
This news release includes certain "forward-looking information" and "forward-looking statements"
(collectively "forward-looking statements") within the meaning of applicable Canadian and United States
securities legislation including the United States Private Securities Litigation Reform Act of 1995. These
forward-looking statements are made as of the date of this news release. Forward-looking statements are
frequently, but not always, identified by words such as "expects", "anticipates", "believes", "plans",
"projects", "intends", "estimates", "envisages", "potential", "possible", "strategy", "goals", "objectives",
or variations thereof or stating that certain actions, events or results "may", "could", "would", "might" or
"will" be taken, occur or be achieved, or the negative of any of these terms and similar expressions.
Forward-looking statements in this news release relate to future events or future performance and reflect
current estimates, predictions, expectations or beliefs regarding future events and include, but are not
limited to, statements with respect to: (i) the near-term potential to expand the existing Goldlund
resource; (ii)the potential for the existence of significant gold mineralization 10 kilometres from the
current resource area at the Goldlund project along the property's 50 kilometre strike length;(iii) the
completion of metallic screen fire assays; (iv) assaying of the seven drill holes at the Eaglelund prospect
and one drill hole at the Miles prospect, and the results of assays; (v) the estimated amount and grade of
Mineral Resources at Goldlund; and (vi) the potential for exploration upside at Goldlund. All forward-
looking statements are based on First Mining's or its consultants' current beliefs as well as various
assumptions made by them and information currently available to them. The most significant assumptions
are set forth above, but generally these assumptions include: (i) the presence of and continuity of metals
at Goldlund at estimated grades; (ii) the capacities and durability of various machinery and equipment;
and (iii) success in realizing proposed regional drilling programs. Although the Company's management
considers these assumptions to be reasonable based on information currently available to it, they may
prove to be incorrect.
By their very nature, forward-looking statements involve inherent risks and uncertainties, both general
and specific, and risks exist that estimates, forecasts, projections and other forward-looking statements
will not be achieved or that assumptions do not reflect future experience. We caution readers not to place
undue reliance on these forward-looking statements as a number of important factors could cause the
actual outcomes to differ materially from the beliefs, plans, objectives, expectations, anticipations,
estimates assumptions and intentions expressed in such forward-looking statements. These risk factors
may be generally stated as the risk that the assumptions and estimates expressed above do not occur as
forecast, but specifically include, without limitation: (i) risks relating to variations in the mineral content
within the material identified as Mineral Resources from that predicted; (ii) general risks related to
exploration drilling programs; (iii) developments in world metals markets; (iv) risks relating to
fluctuations in the Canadian dollar relative to the US dollar; (v) management's discretion to refocus the
Company's exploration efforts and/or alter the Company's short and long term business plans; and (vi)
the additional risks described in First Mining's Annual Information Form for the year ended December
31, 2016 filed with the Canadian securities regulatory authorities under the Company's SEDAR profile
at www.sedar.com, and in First Mining's Annual Report on Form 40-F filed with the SEC on EDGAR.
First Mining cautions that the foregoing list of factors that may affect future results is not exhaustive.
When relying on our forward-looking statements to make decisions with respect to First Mining, investors
and others should carefully consider the foregoing factors and other uncertainties and potential events.
First Mining does not undertake to update any forward-looking statement, whether written or oral, that
may be made from time to time by the Company or on our behalf, except as required by law.
Cautionary Note to United States Investors
This news release has been prepared in accordance with the requirements of the securities laws in effect
in Canada, which differ from the requirements of U.S. securities laws. Unless otherwise indicated, all
resource and reserve estimates included in this news release have been prepared in accordance with
National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101") and the
Canadian Institute of Mining, Metallurgy, and Petroleum 2014 Definition Standards on Mineral
Resources and Mineral Reserves. NI 43-101 is a rule developed by the Canadian Securities
Administrators which establishes standards for all public disclosure an issuer makes of scientific and
technical information concerning mineral projects. Canadian standards, including NI 43-101, differ
significantly from the requirements of the United States Securities and Exchange Commission ("SEC"),
and mineral resource and reserve information contained herein may not be comparable to similar
information disclosed by U.S. companies. In particular, and without limiting the generality of the
foregoing, the term "resource" does not equate to the term "reserves". Under U.S. standards,
mineralization may not be classified as a "reserve" unless the determination has been made that the
mineralization could be economically and legally produced or extracted at the time the reserve
determination is made. The SEC's disclosure standards normally do not permit the inclusion of
information concerning "measured mineral resources", "indicated mineral resources" or "inferred
mineral resources" or other descriptions of the amount of mineralization in mineral deposits that do not
constitute "reserves" by U.S. standards in documents filed with the SEC. Investors are cautioned not to
assume that any part or all of mineral deposits in these categories will ever be converted into reserves.
U.S. investors should also understand that "inferred mineral resources" have a great amount of
uncertainty as to their existence and great uncertainty as to their economic and legal feasibility. It cannot
be assumed that all or any part of an "inferred mineral resource" will ever be upgraded to a higher
category. Under Canadian rules, estimated "inferred mineral resources" may not form the basis of
feasibility or pre-feasibility studies except in rare cases. Investors are cautioned not to assume that all or
any part of an "inferred mineral resource" exists or is economically or legally mineable. Disclosure of
"contained ounces" in a resource is permitted disclosure under Canadian regulations; however, the SEC
normally only permits issuers to report mineralization that does not constitute "reserves" by SEC
standards as in-place tonnage and grade without reference to unit measures. The requirements of NI 43-
101 for identification of "reserves" are also not the same as those of the SEC, and reserves reported by
the Company in compliance with NI 43-101 may not qualify as "reserves" under SEC standards.
Accordingly, information concerning mineral deposits set forth herein may not be comparable with
information made public by companies that report in accordance with U.S. standards.
SOURCE: First Mining Gold Corp.