Faraday Copper Intersects Near-Surface Copper Mineralization from Five Drill Holes in the American Eagle Area
NEWS RELEASE January 22, 2026
Faraday Copper Intersects Near-Surface Copper Mineralization from
Five Drill Holes in the American Eagle Area
January 22, 2026 – Vancouver, British Columbia – Faraday Copper Corp. (“Faraday” or the “Company”)
(TSX:FDY) (OTCQX:CPPKF) is pleased to announce the results of the first eight drill holes from its Phase
IV drill program at the Copper Creek Project, located in Arizona (“Co pper Creek”). These holes targeted
near-surface copper mineralization in the American Eagle area as well as infill drilling and geotechnical
objectives.
Paul Harbidge, President and CEO, commen ted, “These initial results from our Phase IV drill program
continue to increase our confidence in expanding the near surface mineralization in the American Eagle
area, further supporting the potential to define a significant open pit mineral resource in this area and unlock
additional economic value for the project. Phase IV drilling is ongoing with three active rigs focused on
increasing the open pit potential, testing district exploration targets, and collecting hydrogeological and
geotechnical data that will be used in future technical studies.”
Highlights
▪ Five drill holes in the American Eagle area intersected near-surface mineralization above
open pit cutoff grade1 and further the potential for an open pit resource to be defined above
the existing American Eagle underground resource.
▪ Drill hole FCD-25-134 intersected several mineralized intervals for a combined 177 metres
(“m”) greater than 0.30% copper, expanding the known extent of the Winchester breccia to
within 100 m from surface. Copper intercepts include:
o 17.58 m at 0.44% copper from 109.42 m;
o 16.46 m at 0.57% copper from 184.54 m; and
o 45.25 m at 0.42% copper from 256.28 m.
▪ North of the Banjo breccia, drill hole FCD-25-129 intersected 56.00 m at 0.41% copper from
160.00 m (approximately 100 m below surface), including 24.00 m at 0.64% from 164.00 m.
▪ The drill holes reported herein further increased confidence of the near-surface mineralization in
the American Eagle area and geotechnical holes confirmed the rock competency is consistent with
the current resource1 suitable for efficient open pit mining.
(For true width information see Table 1)
Phase IV Drilling
The results reported herein are the first results from the Company’s Phase IV drill program which has the
objectives of increasing confidence in the resource, adding further potential open pit mineable inventory,
collecting hydrogeological and geotechnical data and testing district exploration targets. There are currently
three active drill rigs on the property. The program builds on the success of Phase III drilling, which resulted
Page 2
in the discovery of mineralization hosted in breccias and porphyry -style vein zones , particularly in the
American Eagle area.
Drill Results Summary
The American Eagle area, as mapped on surface, covers approximately 800 m by 1,000 m and is host to
numerous prospective breccias and porphyries which have strong copper geochemical signatures (Figure
1). These surface expressions are located above the large underground porphyry mineral resource1. The
Company’s Phase III drilling , which included 34 drill holes, resulted in the discovery of the Banjo,
Winchester and Prada breccias. Phase III was carried out from 9 drill pad locations which allowed limited
testing of the near-surface and lateral extent of mineralization. The approval of the Exploration Plan of
Operations by the Bureau of Land Management in June 2025 (see news release dated July 3, 2025 ) now
provides the ability for expanded drilling in the area.
▪ Drill hole FCD-25-117 was collared 150 m southwest of the American Eagle breccia and drilled to
the north , targeting a vein -zone and the Winchester breccia . After 60 m of porphyry, the hole
intersected granodiorite to 386 m. Breccia and short intervals of porphyry were intersected to 509
m, followed by granodiorite to the end of the hole. Alteration is sericite, mainly affecting the breccia
domain and zones of dense porphyry-style veining which were intersected from approximately 58
m. Copper mineralization occurs as pyrite-chalcopyrite in porphyry-style veins and breccia cement.
▪ Drill hole FCD-25-118 was collared 300 m west of the American Eagle breccia and drilled to the
south. This hole tested a previously undrilled area with the objective of gaining geological and
geotechnical data at the periphery of known mineralization, confirming competent rock quality. The
hole intersected granodiorite to 181 m and porphyry to the end of the hole. Within the granodiorite,
several narrow (< 2m) breccia intervals were intersected. Alteration is generally moderate and
chlorite-sericite dominant. Mineralization occurs in veins as pyrite with trace chalcopyrite.
▪ Drill hole FCD -25-119 was collared at the same location as FCD -25-117 and drilled to the
northwest. It is testing the westward extension of a prominent east-west vein zone west of the
American Eagle breccia in an area of sparse historical drilling. The hole also had a geotechnical
objective, confirming competent rock quality. It intersected porphyry and lesser granodiorite for the
first 112 m and then entered granodiorite to 297 m, followed by a previously unknown 20 m interval
of hydrothermal breccia before going back into granodiorite to the end of the hole. Chalcopyrite
together with pyrite occurs in porphyry style veins, whereas the hydrothermal breccia is cemented
by pyrite. Oxide copper mineralization consisting of primarily chrysocolla and neotocite is present
in the first 30 m.
▪ Drill hole FCD-25-120 was collared at the same location as FCD -25-117 and drilled to the south.
This hole tested a previously undrilled area with the objective of gaining geological and
geotechnical data at the periphery of known mineralization , confirming competent rock quality . It
intersected 10 m of porphyry, followed by granodiorite to 43 m. Several types of porphyry dominate
to 218 m with the remainder of the hole in granodiorite. Porphyry style veins with pyrite and trace
chalcopyrite occur throughout the hole.
▪ Drill hole FCD-25-121 was collared near the Prada breccia, approximately 300 m southeast of the
American Eagle breccia and drilled to the northeast. It tested the eastward extent of the Prada
breccia trend in an area of limited historical drilling. The hole intersected granodiorite for the first
50 m , followed by several narrow breccia intercepts and porphyry to 117 m. Granodiorite was
intersected to 140 m and porphyry to 208 m. Breccia and lesser porphyry dominate to 285 m. The
hole ends in granodiorite. Sericitic alteration accompanies the breccia domains. Pyrite is the
dominant breccia cement and also occurs in porphyry -style veins. Chalcopyrite occurs in trace
amounts. The presence of breccia with the increase of chalcopyrite with depth observed elsewhere
at Copper Creek suggests that mineralization potential exists at depth below this drill hole and
follow up drilling is being planned.
Page 3
▪ Drill hole FCD-25-128 was collared approximately 300 m northeast of the American Eagle breccia
and drilled to the west, testing for near -surface mineralization above the Banjo breccia. The hole
intersected 79 m of granodiorite before entering porphyry to the end of the hole. An interval of
hydrothermal breccia cutting porphyry is present from 161 m to 170 m. Mineralization occurs as
chalcopyrite together with pyrite in veins and breccia cement. Chalcocite is present in the top 50 m
of the hole.
▪ Drill hole FCD -25-129 was collared at the same location as FCD -25-128 and was drilled to the
northwest, testing the near-surface and northward continuation of the Banjo breccia. It intersected
granodiorite with a porphyry domain from 175 m to 267 m. A zone of intense sericitic alteration
affects the porphyry and adjacent granodiorite domain from approximately 1 58 m to 205 m. This
domain contains disseminated chalcopyrite and pyrite.
▪ Drill hole FCD-25-134 was collared approximately 100 m north of the American Eagle breccia and
drilled to the northwest, testing several breccia targets (Figure 2) . It started and ended in
granodiorite with breccia domains and porphyry intervals from 56 m to 113 m, from 184 m to 211
m, and from 256 m to 405 m. Breccia domains are a ssociated with intense sericitic alteration.
Mineralization occurs as pyrite-chalcopyrite in breccia cement and porphyry style veins.
Next Steps
Phase IV drilling continues with a total of 40,000 m currently planned and is focused on near -surface
mineralization as well as geotechnical and hydrogeological objectives. The Company has released results
from 2,875 m drilled in 8 holes, all of which are in the American Eagle area. The assay results for additional
completed drill holes will be released as they are received, analyzed and confirmed by the Company.
Figure 1: Plan View Showing Surface Geology and Location of the Drill Holes in the American Eagle Area
Note: The open pit shell is based on constraints used in the MRE as presented in the Copper Creek Technical Report1.
Page 4
Figure 2: Images of Mineralized Core from Drill Hole FCD-25-134
Table 1: Selected Drill Results
Drill Hole ID From To Length True
Width Cu Au Ag Mo
(m) (m) (m) (m) (%) (g/t) (g/t) (%)
FCD-25-117 121.00 131.00 10.00 10 0.21 N/A 1.35 0.0006
and 146.00 192.00 46.00 46 0.23 N/A 0.88 0.0004
including 178.00 188.00 10.00 10 0.45 N/A 1.41 0.0004
and 274.00 362.00 88.00 88 0.17 N/A 0.56 0.0010
and 404.00 482.90 78.90 47 0.25 N/A 0.74 0.0007
Including 410.00 432.52 22.52 14 0.46 N/A 1.39 0.0012
FCD-25-119 14.13 28.22 14.09 14 0.15 N/A 0.57 0.0004
and 135.00 145.00 10.00 10 0.26 N/A 1.66 0.0004
and 243.00 255.00 12.00 12 0.25 N/A 0.89 0.0008
and 271.00 295.00 24.00 24 0.25 N/A 0.86 0.0005
FCD-25-128 8.00 24.00 16.00 16 0.57 N/A 1.59 0.0009
and 139.00 212.00 73.00 73 0.29 N/A 0.85 0.0020
Including 168.00 198.00 30.00 30 0.42 N/A 1.38 0.0032
FCD-25-129 80.00 100.00 20.00 20 0.17 < 0.01 0.44 0.0007
and 160.00 216.00 56.00 56 0.41 0.01 1.09 0.0002
Including 164.00 188.00 24.00 24 0.64 0.02 1.83 0.0002
and 242.00 266.00 24.00 24 0.16 <0.01 0.60 0.0017
FCD-25-134 20.00 50.00 30.00 30 0.30 N/A 0.64 0.0004
and 109.42 142.31 32.89 32 0.33 0.02 0.99 0.0012
Including 109.42 127.00 17.58 17 0.44 0.02 0.80 0.0004
and 149.17 218.00 68.83 49 0.33 0.01 1.06 0.0026
Including 184.54 201.00 16.46 12 0.57 0.02 1.48 0.0005
Page 5
Drill Hole ID From To Length True
Width Cu Au Ag Mo
(m) (m) (m) (m) (%) (g/t) (g/t) (%)
and 256.28 301.53 45.25 45 0.42 0.02 1.16 0.0005
and 320.00 363.00 43.00 32 0.27 0.01 0.73 0.0011
and 376.00 404.95 28.95 21 0.20 0.01 0.57 0.0012
And 420.00 437.00 17.00 17 0.28 0.01 0.67 0.0006
FCD-25-118 No significant intercepts geotechnical specific hole
FCD-25-120 No significant intercepts geotechnical specific hole
FCD-25-121 No significant intercepts
Note: All intercepts are reported as downhole drill widths. Mineralization includes bulk porphyry style and breccia
mineralization. True widths are approximate due to the irregular shape of mineralized domains. N/A: Not analyzed.
Table 2: Collar Locations from the Drill Holes Reported Herein
Drill Hole ID Easting Northing Elevation Azimuth Dip Target Depth Depth
(m) (°) (°) (ft) (m)
FCD-25-117 548857 3623290 1310 010 55 American
Eagle W 1805.6 550.35
FCD-25-118 548704 3623290 1304 172 45 American
Eagle SW 666.0 203.00
FCD-25-119 548855 3623291 1309 320 45 American
Eagle W 1641.0 500.18
FCD-25-120 548861 3623289 1310 203 45 American
Eagle SW 810.6 247.07
FCD-25-121 549163 3623124 1353 032 45 Prada E 985.0 300.23
FCD-25-128 549278 3623531 1360 265 45 Banjo 723.1 220.40
FCD-25-129 549279 3623532 1360 300 50 Banjo N 1365.2 416.11
FCD-25-134 549044 3623489 1308 310 45 American
Eagle N 1435.0 437.39
Note: Coordinates are given as World Geodetic System 84, Universal Transverse Mercator Zone 12 north (WGS84,
UTM12N).
Sampling Methodology, Chain of Custody, Quality Control and Quality Assurance
All sampling was conducted under the supervision of the Company's geologists and the chain of custody
from Copper Creek to the independent sample preparation facility, ALS Laboratories in Tucson, AZ, was
continuously monitored. The samples were taken as ½ core, over 2 m core length. Samples were crushed,
pulverized and sample pulps were analyzed using industry standard analytical methods including a 4-Acid
ICP-MS multielement package and an ICP-AES method for high-grade copper samples. Copper
mineralized samples were also analyzed for acid and cyanide soluble copper. Gold was analyzed on a 30
g aliquot by fire assay with an ICP-AES finish. A certified reference sample was inserted every 20th sample.
Coarse and fine blanks were inserted every 20th sample. Approximately 5% of the core samples were cut
into ¼ core and submitted as field duplicates. On top of internal QA-QC protocol, additional blanks,
reference materials and duplicates were inserted by the analytical laboratory according to their procedure.
Data verification of the analytical results included a statistical analysis of the standards and blanks that
must pass certain parameters for acceptance to ensure accurate and verifiable results.
Page 6
Qualified Person
The scientific and technical information contained in this news release has been reviewed and approved
by Faraday’s VP Exploration, Dr. Thomas Bissig, P. Geo., who is a Qualified Person under National
Instrument 43-101 - Standards of Disclosure for Mineral Projects (“NI 43-101”).
Notes
1 The Mineral Resource Estimate and copper cutoff grade are presented in the report titled “Copper Creek
Project NI 43-101 Technical Report and Preliminary Economic Assessment” with an effective date of May
3, 2023, available on the Company’s website at www.faradaycopper.com and on the Company’s SEDAR+
profile at www.sedarplus.ca.
About Faraday Copper
Faraday Copper is an exploration company focused on advancing its flagship copper project in Arizona,
U.S. The Copper Creek Project is one of the largest undeveloped copper projects in North America with
significant district scale exploration potential. The Company is well-funded to deliver on its key milestones
and benefits from a management team and board of directors with senior mining company experience and
expertise. Faraday trades on the TSX under the symbol “FDY”.
For additional information please contact:
Stacey Pavlova, CFA
Vice President, Investor Relations & Communications
Faraday Copper Corp.
E-mail: [email protected]
Website: www.faradaycopper.com
To receive news releases by e-mail, please register using the Faraday website at www.faradaycopper.com.
Cautionary Note on Forward Looking Statements
Some of the statements in this news release, other than statements of historical fact, are “forward-looking statements” and are based
on the opinions and estimates of management as of the date such statements are made and are necessarily based on estimates and
assumptions that are inherently subject to known and unknown risks, uncertainties and other factors that may cause actual res ults,
level of activity, performance or achievements of Faraday to be materially different from those expressed or implied by such forward-
looking statements. Such forward-looking statements and forward -looking information specifically include, but are not limited to,
statements concerning the exploration potential of the Copper Creek property.
Although Faraday believes the expectations expressed in such forward -looking statements are based on reasonable assumptions,
such statements should not be in any way construed as guarantees of future performance and actual results or developments may
differ materially. Accordingly, readers should not place undue reliance on forward-looking statements or information.
Factors that could cause actual results to differ materially from those in forward-looking statements include without limitation: market
prices for metals; the conclusions of detailed feasibility and technical analyses; lower than expected grades and quantities of mineral
resources; receipt of regulatory approval; receipt of shareholder approval; mining rates and recovery rates; significant capi tal
requirements; price volatility in the spot and forward markets for commodities; fluctuations in rates of excha nge; taxation; controls,
regulations and political or economic developments in the countries in which Faraday does or may carry on business; the speculative
nature of mineral exploration and development, competition; loss of key employees; rising costs of labour, supplies, fuel and
equipment; actual results of current exploration or reclamation activities; accidents; labour disputes; defective title to mi neral claims
or property or contests over claims to mineral properties; unexpected delays and costs inhe rent to consulting and accommodating
rights of Indigenous peoples and other groups; risks, uncertainties and unanticipated delays associated with obtaining and maintaining
necessary licenses, permits and authorizations and complying with permitting require ments, including those associated with the
Copper Creek property; and uncertainties with respect to any future acquisitions by Faraday. In addition, there are risks and hazards
associated with the business of mineral exploration, development and mining, including environmental events and hazards, industrial
accidents, unusual or unexpected formations, pressures, cave-ins, flooding and the risk of inadequate insurance or inability to obtain
insurance to cover these risks as well as “Risk Factors” included in Faraday’s disclosure documents filed on and available at
www.sedarplus.ca.
This press release does not constitute an offer to sell or a solicitation of an offer to buy any securities in any jurisdiction to any person
to whom it is unlawful to make such an offer or solicitation in such jurisdiction. This press release is not, and under no circumstances
is to be construed as, a prospectus, an offering memorandum, an advertisement or a public offering of securities in Faraday in Canada,
Page 7
the United States or any other jurisdiction. No securities commission or similar authority in Canada or in the United States has reviewed
or in any way passed upon this press release, and any representation to the contrary is an offence.