Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

FDY.TO ·

CopperBank Confirms Historic, High-Grade Copper Intercepts and Identifies Mineralized Zones in Previously Unsampled Core at Copper Creek Project in Arizona; Update on Drilling Program

Drill Results

CSE: CBK FSE: 9CP OTC: CPPKF

FOR IMMEDIATE RELEASE April 13, 2022

(CBK 2022– NR #4)

CopperBank Confirms Historic, High-Grade Copper Intercepts and

Identifies Mineralized Zones in Previously Unsampled Core at Copper

Creek Project in Arizona; Update on Drilling Program

April 13, 2022 – Vancouver, British Columbia – CopperBank Resources Corp. (“Copper Bank” or the

“Company”) (CSE:CBK) is pleased to announce the initial results of a drill core re-sampling program aimed

at confirming historic high-grade breccia-hosted mineralization and sampling of previously unsampled drill

core adjacent to the breccias.

Paul Harbidge, President & CEO, commented: “Development of a technically sound geological model forms

the foundation of a robust mineral resource estimate that will enable the delivery of an optimized technical

study. I am pleased with the progress the tea m has made on validating historical data and the re -

interpretation of the various datasets. We are advancing towards the publication of a geological model for

Copper Creek in May 2022 and a combined open pit and underground Mineral Resource Estimate in the

third quarter of this year.”

Highlights:

• Hole G4: 48.47 metres of 1.69% copper from 15.54 metres, confirming historic intercepts of

1.66% copper over the same interval,

• Hole G5: 33.52 metres of 1.20% copper from 36.58 metres, confirming historic intercepts of

1.08% copper over the same interval,

• Hole G10: 20.12 metres of 0.22% copper from 215.19 metres, in previously unsampled drill

core, including 6.39 metres of 0.43% copper from 215.19 metres, confirming the existence of

peripheral mineralization outside the known, high-grade, breccia-hosted mineralization.

• Over 2,800 metres of the 5,000 metre drilling program has been completed.

Dr. Thomas Bissig, Vice President of Exploration, commented: “Our initial geochemical results are very

encouraging as they confirm near surface high-grade historic results, thereby increasing our confidence in

the data, and they demonstrate the existence of mineralization in previously unsampled core adja cent to

the known, high-grade breccia intercepts.

We are currently working on expanding the geochemical data coverage in proximity to the Copper Giant,

Copper Prince and other breccia bodies (Figure 1). The goal of this work is to expand the near-surface

mineralized footprint ahead of our new open-pit and underground Mineral Resource Estimate, which is

expected to be published in the third quarter of 2022.”

- 2 -

Discussion of Geology of the Historic Glory Hole Drillholes with the New Results

The geology of the area is dominated by Paleocene Glory Hole volcanics intruded by the Laramide age

Copper Creek Granodiorite, both of which are crosscut by mineralized hydrothermal breccias. Drillholes

G4, G5 and G10 were originally drilled by AM T (USA), Inc. in 1997. The results of the recent sampling

program are summarized below, as well as in Table 1 and Figure 2:

• Hole G4 was drilled at a dip of 65 degrees due north to a depth of 9 2.4 metres and intersected

Glory Hole volcanics intruded by intensely quartz -sericite altered and quartz -chalcopyrite-pyrite

cemented breccia from approximately 36.3 metres to 62.8 metres;

• Hole G5 was drilled at a dip of 80 degrees to azimuth 120 degrees to a depth of 90.5 metres,

intersecting Glory Hole volcanics crosscut by intensely quartz -sericite altered and quartz -

chalcopyrite-pyrite cemented breccia from 17.2 metres to 61.1 metres; and

• Hole G10 was drilled at a dip of 64 degrees to azimuth 245 degrees to a depth of 388.3 metres.

The first 16 2.1 metres intersected Glory Hole volcanics followed by a tectonic breccia to 186.9

metres, after which the dominant lithologies are granodiorite and granodiorite porphyry. Magmatic-

hydrothermal breccia was intersected from 314.3 metres to 34 0.9 metres depth. Historic sampling

only included the intervals from 137.2 metres to 198.1 metres and 274.3 metres to 365.8 metres.

The best grades are hosted in the breccia interval, with lower grade mineralization present adjacent

to the breccia within granodiorite. Moderate to intense quartz -sericite alteration overprinting

potassic alteration characterizes the mineralized intercepts.

Update on Phase I Drilling Program

The 5,000 metre diamond drilling program was designed to test previously undrilled areas between zones

of known high-grade breccia mineralization, confirm historic results, obtain geotechnical information needed

to advance mine design and planning , provide samples for metallurgical test work, and commence

hydrogeological studies (Figure 3).

• Over 2,800 metres has been completed, representing four of the eight planned holes. Three of the

completed holes intersected breccias over significant interval lengths between approximately 40

metres and 200 metres, and mineralization has been observed in all drill holes. Assay results

remain pending.

Sampling Methodology, Chain of Custody, Quality Control and Quality Assurance

All sampling was conducted under the supervision of the Company’s geologists and the chain of custody

from the Project to the independent sample preparation facility , ALS Laboratories in Tucson, AZ, was

continuously monitored. The samples were taken as ¼ and ½ core, as far as possible honoring historic

sample intervals (up to 10 feet or 3.05 metres). Samples were crushed, pulverized and sample pulps were

analyzed using industry standard analytical methods including a 4-Acid ICP-MS multielement package and

an ICP -AES method for high -grade Cu samples. A certified reference sample was inserted every 20 th

sample. Coarse blanks were inserted every 20 th sample a s well. Approximately 5% of the previously

unsampled core samples were submitted as field duplicates. On top of internal QA-QC protocol, additional

blanks, reference materials and duplicates were inserted by the analytical laboratory according to their

procedure. Data verification of the analytical results included a statistical analysis of the standards and

blanks that must pass certain parameters for acceptance to ensure accurate and verifiable results.

- 3 -

Qualified Persons

The technical information in this news release has been reviewed and approved by CopperBank’s VP of

Exploration, Dr. Thomas Bissig, P.Geo, who is deemed a Qualified Person as defined by National

Instrument 43-101.

About CopperBank

CopperBank is a Canadian exploration company focused on advancing two copper projects in The United

States of America. The Company trades on the Canadian Securities Exchange under the symbol “CBK”.

For additional information please contact:

Paul Harbidge President and CEO

Phone +1-778-987-2761

E-mail [email protected]

Website www.copperbankcorp.com

Figure 1: Location Map

- 4 -

Figure 2: Long section through Glory Hole Breccia, looking east

Note: Inset shows plan view of the breccia body and the section line. Copper concentrations from

resampled and previously unsampled core are shown as bar graphs left of drillhole trace, whereas historic

copper values are shown downhole. Other drillhole traces shown as thin black lines.

- 5 -

Figure 3: Plan view of historic block model and current drill hole program

Drill Hole Details

1: From Childs-Adwinkle to Mammoth, N to S – IN PROGRESS

2: Below Glory Hole from NW to SE - COMPLETED

3: From Glory Hole SE towards Copper Prince - COMPLETED

4: Angled NW to SE across Copper Creek to Keel - PENDING

5: From Copper Prince to Copper Giant drilled to N - COMPLETED

6: From Copper Giant to Copper Prince drilled to S - COMPLETED

7: Angled hole to N across American Eagle - PENDING

8: From NE to SW below Old Reliable - PENDING

Table 1: Results from Reanalyzing High-Grade Breccia Intercepts and Previously Unsampled Drill Core

Hole

ID

From

(m)

To

(m)

Length

(m)

Grade (Cu %) Incl From

(m)

To

(m)

Length

(m)

Grade (Cu %)

Historic New Historic New

G4 15.54 64.01 48.47 1.66 1.69

G5 36.58 70.10 33.52 1.08 1.20

G10 137.16 198.12 60.96 0.11 0.14 173.74 188.98 15.24 0.20 0.26

G10 215.19 235.31 20.12 N/A 0.22 215.19 221.58 6.39 N/A 0.43

G10 274.32 365.76 91.44 0.24 0.26 313.94 341.38 27.44 0.68 0.72

- 6 -

Cautionary Note on Forward Looking Statements

Some of the statements in this news release, other than statements of historical fact, are “forward-looking statements” and are based

on the opinions and estimates of management as of the date such statements are made and are necessarily based on estimates and

assumptions that are inherently subject to known and unknown risks, uncertainties and other factors that may cause actual res ults,

level of activity, performance or achievements of CopperBank to be materially different from those expressed or implied by such

forward-looking statements. Such forward-looking statements and forward-looking information specifically include, but are not limited

to, statements concerning the exploration prospects and projected resources of the properties of CopperBank, futu re capitalization

and market capitalization of CopperBank, development of and future drilling on the Copper Creek property.

Although CopperBank believes the expectations expressed in such forward-looking statements are based on reasonable assumptions,

such statements should not be in any way construed as guarantees of future performance and actual results or developments may

differ materially. Accordingly, readers should not place undue reliance on forward-looking statements or information.

Factors that could cause actual results to differ materially from those in forward-looking statements include without limitation: market

prices for metals; the conclusions of detailed feasibility and technical analyses; lower than expected grades and quantities of

resources; receipt of regulatory approval; receipt of shareholder approval; mining rates and recovery rates; significant capi tal

requirements; price volatility in the spot and forward markets for commodities; fluctuations in rates of exchange; taxation; controls,

regulations and political or economic developments in the countries in which CopperBank does or may carry on business; t he

speculative nature of mineral exploration and development, competition; loss of key employees; rising costs of labour, suppli es, fuel

and equipment; actual results of current exploration or reclamation activities; accidents; labour disputes; defective t itle to mineral

claims or property or contests over claims to mineral properties; unexpected delays and costs inherent to consulting and

accommodating rights of Indigenous peoples and other groups; risks, uncertainties and unanticipated delays associated with obtaining

and maintaining necessary licenses, permits and authorizations and complying with permitting requirements, including those

associated with the Copper Creek property; and uncertainties with respect to any future acquisitions by CopperBank. In addition, there

are risks and hazards associated with the business of mineral exploration, development and mining, including environmental events

and hazards, industrial accidents, unusual or unexpected formations, pressures, cave -ins, flooding and the ris k of inadequate

insurance or inability to obtain insurance to cover these risks as well as “Risk Factors” included in CopperBank’s disclosure documents

filed on and available at www.sedar.com.

This press release does not constitute an offer to sell or a solicitation of an offer to buy any securities in any jurisdiction to any person

to whom it is unlawful to make such an offer or solicitation in such jurisdiction. This press release is not, and under no circumstances

is to be construed as, a prospectus, an offering memorandum, an advertisement or a public offering of securities in CopperBan k in

Canada, the United States or any other jurisdiction. No securities commission or similar authority in Canada or in the Unit ed States

has reviewed or in any way passed upon this press release, and any representation to the contrary is an offence.

All of the forward-looking statements contained in this press release are qualified by these cautionary statements. CopperBank does

not intend, and does not assume any obligation, to update these forward -looking statements, except as required under applicable

securities legislation. For more information on the CopperBank, readers should refer to www.sedar.com for the CopperBank’s filings

with the Canadian securities regulatory authorities.