E3 Metals Achieves Improved Speed and Efficiency of Lithium Recovery
E3 Metals Achieves Improved Speed and
Efficiency of Lithium Recovery
TSXV: ETMC
FSE:
OU7A
OTC:
EEMMF
Reduced Direct Lithium Extraction (DLE) recovery time from 2 hours to less than 10 minutes,
with over 90% recovery
CALGARY
,
March 11, 2020
/CNW/ - E3 METALS CORP. (TSXV: ETMC) (FSE: OU7A) (OTC:
EEMMF) (The "Company" or "E3 Metals") is pleased to provide an update on its proprietary Direct
Lithium Extraction Process ("DLE Process") that is being advanced in collaboration with Livent
Corporation (NYSE: LTHM) ("Livent").
Through the continued development of E3 Metals' proprietary Ion Exchange DLE Process, the
Company is excited to outline the rapid reaction kinetics on the recovery of lithium from
Alberta
brine. Using brine collected from E3's Leduc Reservoir in
Alberta
this past November, 2019 (see
News Release Here
), the technical team has successfully achieved reaction times from lab-based
test work that demonstrated over 90% recover in less than 10 minutes, as opposed to hours. This is
a critical achievement as the Company moves towards piloting. Faster reaction times while achieving
high recoveries results in reduced retention time of brine in the processing equipment.
Lab testing has demonstrated that lithium recovery of 92% is achieved in under 10 minutes from
Alberta
brines (Figure 1), drastically reducing the time required to complete each cycle of lithium
extraction. With the achievement of these fast reaction kinetics, the Company anticipates increased
efficiencies due to accelerated lab testing. In 2020, E3 Metals will continue its joint development with
Livent to optimize its proprietary Ion Exchange DLE Process for lithium extraction from
Alberta
brine.
"These results demonstrate the efficiency that can be obtained from the optimization of E3's
proprietary Ion Exchange Direct Lithium Extraction Process in collaboration with Livent,"
Chris
Doornbos
, E3 Metals' CEO commented, "This is really just the beginning of the work we are
conducting together, and we anticipate further improvements as we progress towards our goal of
piloting our technology in
Alberta
."
Figure 1: Lithium Recovery (%) Vs Reaction Time (min) (CNW Group/E3 Metals Corp.)
About E3 Metals Corp.
E3 Metals is a lithium development company with 6.7 million tonnes lithium carbonate equivalent
(LCE) inferred mineral resources
1
in Alberta. E3 Metals is currently advancing its proprietary Ion
Exchange Direct Lithium Extraction Process (DLE Process) in partnership with Livent Corporation
under a Joint Development Agreement. Livent is the world's largest pure-play lithium producer, well-
known for being one of the lowest cost producers of lithium carbonate. With facilities across the
globe, Livent holds technical expertise in the extraction and production of various lithium products. E3
Metals also continues to work with partners at the
University of Alberta
and at GreenCentre Canada.
Through the successful scale up its DLE Process towards commercialization, E3 Metals plans to
quickly move towards the production of high purity, battery grade, lithium products. With a
significant lithium resource and innovative technology solutions, E3 Metals has the potential to deliver
lithium to market from one of the best jurisdictions in the world. The development of this lithium
resource through brine production is a well-understood venture in
Alberta
, where this brine is
currently being produced to surface through an extensive existing oil and gas infrastructure and
development. For more information about E3 Metals, visit
www.e3metalscorp.com
.
ON BEHALF OF THE BOARD OF DIRECTORS,
Chris Doornbos
, President & CEO
E3 METALS CORP.
Chris Doornbos
(P.Geo), CEO and Director of E3 Metals Corp., is a Qualified Person as defined by
NI 43-101 and has read and approved the technical information contained in this announcement.
1: E3 Metals has released information on three 43-101 Technical Reports totaling a resource of 6.7
Mt LCE. The Central Clearwater Resource Area (CCRA) Technical Report, identifying 1.9Mt LCE
(inferred), is dated effective
October 27, 2017
, and the North Rocky Resource Area (NRRA)
Technical Report was dated effective
October 27, 2017
, identifies 0.9Mt LCE (inferred). A third
report for the Exshaw West Resource Area (EWRA), identifies 3.9Mt LCE (inferred) and was filed
on
June 15, 2018
, effective
June 4, 2018
. All reports are available on SEDAR (
www.sedar.com
)
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in
the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of
this release.
This news release includes certain forward-looking statements concerning the potential of the
Company's projects and technology, as well as management's objectives, strategies, beliefs and
intentions. Forward looking statements are frequently identified by such words as "may", "will",
"plan", "expect", "anticipate", "estimate", "intend" and similar words referring to future events and
results. Forward-looking statements are based on the current opinions and expectations of
management. All forward-looking information is inherently uncertain and subject to a variety of
assumptions, risks and uncertainties, including the speculative nature of mineral exploration and
development, fluctuating commodity prices, the effectiveness and feasibility of emerging lithium
extraction technologies which have not yet been tested or proven on a commercial scale or on the
Company's brine, competitive risks and the availability of financing, as described in more detail in our
recent securities filings available at
www.sedar.com
. Actual events or results may differ materially
from those projected in the forward-looking statements and we caution against placing undue
reliance thereon. We assume no obligation to revise or update these forward-looking statements
except as required by applicable law.
SOURCE
E3 Metals Corp.
View original content to download multimedia:
http://www.newswire.ca/en/releases/archive/March2020/11/c0473.html
%SEDAR: 00011471E
For further information:
205 - 227 10th St NW, Calgary, AB T2N 1V5, +1 (587) 324-2775,
[email protected], e3metalscorp.com
CO: E3 Metals Corp.
CNW 03:05e 11-MAR-20