Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

EQTY.V ·

Equity Metals Extends NG-3 Vein Down Dip With 3.1 metres Averaging 6.2g/t Au, 138g/t Ag, 0.1% Cu, 0.2% Pb and 0.7% Zn (8.7g/t AuEq or 650g/t AgEq) at the Silver Queen Project, BC

Drill Results

Equity Metals Extends NG-3 Vein Down Dip

With 3.1 metres Averaging 6.2g/t Au, 138g/t

Ag, 0.1% Cu, 0.2% Pb and 0.7% Zn (8.7g/t AuEq

or 650g/t AgEq) at the Silver Queen Project, BC

Vancouver, British Columbia--(Newsfile Corp. - May 17, 2021) -

Equity Metals Corporation (TSXV:

EQTY) ("Equity")

reports new high-grade gold-silver assays from its 2021 Phase III drill program on the

Silver Queen Project, which include the following highlights from the Company's first two holes into the

NG-3 Vein system

:

a

0.8 metre interval

(0.6 metre est. TT) averaging

18.7g/t Au, 351g/t Ag, 0.2% Cu, 0.8% Pb

and

0.1% Zn (24.0g/t AuEq or 1,802g/t AgEq)

within a

4.0 metre

interval (3.1 metres Est. TT)

averaging

6.2g/t Au, 138g/t Ag, 0.1% Cu, 0.2% Pb

and

0.7% Zn (8.7g/t AuEq or 650g/t AgEq)

from drill hole

SQ21-024;

a

1.4 metre interval

(1.1 metre est. TT) averaging

4.3g/t Au, 449g/t Ag, 0.4% Cu, 0.4% Pb

and

1.5% Zn (12.4g/t AuEq or 926g/t AgEq)

from drill hole

SQ21-024;

and

a

1.5 metre interval

(1.2 metre est. TT) averaging

4.9g/t Au, 55g/t Ag, 0.2% Cu

and

0.1% Zn

(6.0g/t AuEq or 448g/t AgEq)

from drill hole

SQ21-025.

These are Equity's first two holes into the NG-3 vein, which historically has been only partially tested by

widely spaced drill holes. This new drilling establishes continuity between several historical drill

intercepts in the NG-3 Vein and associated hangingwall and footwall structures, which can now be traced

down-dip for up to

250 metres

. Mineralization remains open laterally to the southeast for 700 metres

where it projects toward several historical intercepts within the Itsit Porphyry target area. A small portion

of the NG-3 vein was included in the 2019 NI43-101 Mineral Resource Estimate, leaving an approximate

700 metre x 450 metre target area available for additional drill testing and resource expansion.

Multiple narrow, high-grade intercepts were also returned from step-out drilling on the

No. 3 Vein

system

in drill holes SQ21-026, -027 and -028 including:

a

2.3 metre interval

(1.6 metre est. TT) averaging

2.4g/t Au, 151g/t Ag, 0.2% Cu, 0.8% Pb and

2.7% Zn (6.3g/t AuEq or 475g/t AgEq)

from drill hole

SQ21-028

;

a

0.3 metre interval

(0.2 metre est. TT) averaging

6.7g/t Au, 308g/t Ag, 0.5% Cu, 1.4% Pb and

3.6% Zn (13.9g/t AuEq or 1,042g/t AgEq)

from drill hole

SQ21-026

; and

a

1.5 metre interval

(1.2 metre est. TT) averaging

2.4g/t Au, 70g/t Ag, 0.2% Cu, 0.2% Pb and

1.7% Zn (4.6g/t AuEq or 343g/t AgEq)

from drill hole

SQ21-027

;

The drill holes further extend the No. 3 Vein system both laterally (eg: SQ21-026) and down-dip (eg:

SQ21-027, -028) for an additional 50 metres below surface in this vein segment.

These assay results represent mineralized intercepts from a further five core holes which tested the No.

3 and NG-3 vein systems as part of the 2021 Phase III drill program on the Silver Queen property in

which 13 holes were completed for a total of 4,991.3 metres. Further results are pending from three drill

holes that tested the Camp Vein system to depth. Results are expected in the coming weeks.

A total of 31 drill holes for 9,983 metres have now been completed by Equity Metals on the Silver Queen

property in three successive phases of exploration starting in late August 2020. Four separate target

areas have been tested and thick intervals of high-grade gold, silver and base-metal mineralization have

been identified in each of the Camp Vein, No. 5 Vein, No. 3, and NG-3 Vein systems. Several other

veins have received limited and generally shallow drilling but have encountered encouraging intercepts

of precious and base metals. Work is underway to refine several of these targets for initial drilling during

2021.

VP Exploration Rob Macdonald commented,

"Initial drilling on the NG-3 Vein system has confirmed

both grade and down-dip continuity of the mineralized veins to at least 250 metres and has opened a

much more extensive target for further drill testing and possible resource expansion to the southeast.

Additional Phase III assays from the No. 3 Vein continue the systematic expansion of that vein

system, and we are hopeful that Phase III assays from the Camp Vein over the coming weeks will add

to that vein system."

Figure 1: Plan Map of Phase I, II, & III Drilling on the Camp, No. 5, No. 3 and NG-3 Veins

To view an enhanced version of Figure 1, please visit:

https://orders.newsfilecorp.com/files/5566/84210_c79d59dba4107b47_002full.jpg

Figure 2: Longitudinal Section of the 2020-21 No. 3 & NG-3 Vein drilling

To view an enhanced version of Figure 2, please visit:

https://orders.newsfilecorp.com/files/5566/84210_c79d59dba4107b47_003full.jpg

Figure 3: Longitudinal Section of the NG-3 Vein target

To view an enhanced version of Figure 3, please visit:

https://orders.newsfilecorp.com/files/5566/84210_c79d59dba4107b47_004full.jpg

Table 1: Select Drill Intercepts from 2020 Phase III Drilling on the Silver Queen Property.

Drill Hole

From

(m)

To

(m)

Interval

(m)

ETT

(m)

Au

(g/t)

Ag

(g/t)

Cu

(%)

Pb

(%)

Zn

(%)

AuEq

(g/t)

AgEq

(g/t)

Comments

SQ21-

024

109.0

111.0

2.0

1.6

5.8

17

0.0

0.0

0.0

6.1

456

and

209.5

213.5

4.0

3.1

6.2

138

0.1

0.2

0.7

8.7

650

inc.

210.5

211.2

0.8

0.6

18.7

351

0.2

0.8

0.1

24.0

1802

and

286.5

287.9

1.4

1.1

4.3

499

0.4

0.4

1.5

12.4

926

inc.

287.2

287.9

0.7

0.5

7.1

864

0.6

0.7

2.0

20.7

1550

SQ21-

025

220.2

225.0

4.8

3.7

1.8

23

0.1

0.0

0.1

2.3

169

0.5G/T

AuEq

cutoff

inc.

222.5

224.0

1.5

1.2

4.9

55

0.2

0.0

0.1

6.0

448

NG3 Vein

inc.

223.0

223.6

0.6

0.5

11.2

110

0.4

0.1

0.3

13.3

999

and

231.8

233.5

1.8

1.3

2.7

87

0.3

0.1

0.0

4.3

321

NG3 Vein

inc.

232.4

232.9

0.4

0.3

7.1

200

0.8

0.2

0.1

10.9

819

and

251.9

252.2

0.3

0.3

6.9

676

1.5

0.5

1.4

18.8

1409

and

327.8

328.6

0.9

0.7

2.2

144

0.2

0.6

1.4

5.3

401

SQ21-

026

225.7

227.0

1.3

1.0

0.3

106

0.6

0.8

3.7

4.7

353

30.7%

Dilution

inc.

226.7

227.0

0.3

0.2

0.3

269

1.5

3.2

14.2

14.4

1076

and

302.5

302.8

0.3

0.2

6.7

308

0.5

1.4

3.6

13.9

1042

and

342.9

344.6

1.7

1.0

0.6

42

0.4

0.2

1.5

2.4

183

63.6%

Dilution

inc.

344.3

344.6

0.3

0.2

2.4

156

1.7

0.3

3.2

8.4

629

and

401.0

403.5

2.5

1.5

0.4

33

0.2

0.3

1.3

1.8

137

0.5g/t

AuEq

Cutoff

inc.

402.6

402.9

0.3

0.2

2.4

186

0.6

2.3

9.0

11.2

843

SQ21-

027

166.2

166.8

0.7

0.5

0.3

176

0.4

0.6

2.3

4.6

343

and

372.7

373.2

0.5

0.4

3.7

304

1.3

0.4

6.7

13.0

972

and

415.0

416.5

1.5

1.2

2.4

70

0.2

0.2

1.7

4.6

343

0.5g/t

AuEq

Cutoff

inc.

415.8

416.1

0.3

0.2

11.0

309

1.0

0.8

7.3

20.4

1530

SQ21-

028

390.8

393.0

2.3

1.6

2.4

151

0.2

0.8

2.7

6.3

475

22.2%

Dilution

inc.

391.2

391.8

0.6

0.4

8.9

580

0.7

3.0

8.0

22.9

1721

and

426.5

427.0

0.5

0.4

1.3

175

0.1

0.2

1.6

4.7

352

and

452.0

453.1

1.1

0.8

2.3

234

0.7

0.7

3.9

8.6

646

inc.

452.5

452.8

0.3

0.2

6.6

760

2.6

1.5

9.1

25.2

1887

Samples were analyzed by FA/AAS for gold and 48 element ICP-MS by MS Analytical, Langley, BC. Silver (>100ppm), copper, lead and zinc (>1%)

overlimits assayed by ore grade ICP-ES analysis, High silver overlimits (>1000g/t Ag) and gold overlimits (>10g/t Au) re-assayed with FA-Grav. Silver

>10,000g/t re-assayed by concentrate analysis, where a FA-Grav analysis is performed in triplicate and a weighed average reported. Composites

calculated using a 80g/t AgEq (1g/t AuEq) cut-off and <20% internal dilution, except where noted. Reported intervals are core lengths, true widths

undetermined or estimated. Accuracy of results is tested through the systematic inclusion of QA/QC standards, blanks and duplicates into the sample

stream. AuEq and AgEq were calculated using prices of $1,500/oz Au, $20/oz Ag, $2.75/lb Cu, $1.00/lb Pb and $1.10/lb Zn. AuEq and AgEq

calculations did not account for relative metallurgical recoveries of the metals.

About Silver Queen Project

The Silver Queen Project is a premier gold-silver property with over 100 years of historic exploration and

development and is located adjacent to power, roads and rail with significant mining infrastructure that

was developed under previous operators Bradina JV (Bralorne Mines) and Houston Metals Corp. (a

Hunt Brothers company). The property contains an historic decline into the No. 3 Vein, camp

infrastructure, and a maintained Tailings Facility.

The Silver Queen Property consists of 45 mineral claims, 17 crown grants, and two surface crown grants

totalling 18,852ha with no underlying royalties. Mineralization is hosted by a series of epithermal veins

distributed over a 6 sq km area. Most of the existing resource is hosted by the No. 3 Vein, which is

traced by drilling for approximately 1.2km and to the southeast transitions into the NG-3 Vein close to the

buried Itsit copper-molybdenum porphyry.

An initial NI43-101 Mineral Resource Estimate (

see Note 1 below

) was detailed in a News Release

issued on July 16th, 2019, and using a CDN$100 NSR cut-off, reported a resource of:

Indicated - 244,000ozs AuEq:

85,000ozs Au, 5.2Mozs Ag, 5Mlbs Cu, 17Mlbs Pb and 114Mlbs

Zn; and

Inferred - 193,000ozs AuEq:

64,000ozs Au, 4.7Mozs Ag, 5Mlbs Cu, 16Mlbs Pb and 92Mlbs Zn.

More than 20 different veins have been identified on the property, forming an extensive network of zoned

Cretaceous- to Tertiary-age epithermal veins. The property remains largely under explored.

About Equity Metals Corporation

Equity Metals Corporation is a Manex Resource Group Company. Manex provides exploration,

administration, and corporate development services for Equity Metals' two major mineral properties, the

Silver Queen Au-Ag-Zn-Cu project,

located in central B.C., and the

Monument Diamond project

,

located in Lac De Gras, NWT.

The Company owns 100% interest, with no underlying royalty, in the

Silver Queen project,

located

along the Skeena Arch in the Omineca Mining Division, British Columbia. The property hosts high-grade,

precious- and base-metal veins related to a buried porphyry system, which has been only partially

delineated. The Company also has a controlling JV interest in the

Monument Diamond project

,

NWT

,

strategically located in the Lac De Gras district within 40 km of both the Ekati and Diavik diamond

mines. The project owners are Equity Metals Corporation (57.49%), Chris and Jeanne Jennings

(22.11%); and Archon Minerals Ltd. (20.4%). Equity Metals is the operator of the project.

The Company also has royalty and working interests in other Canadian properties, which are being

evaluated further to determine their value to the Company.

1

.

The 2019 Silver Queen Resource Estimate was prepared following CIM definitions for classification of Mineral Resources and identified at a

CDN$100/NSR cut-off, an indicated resource of 815Kt averaging 3.2g/t Au, 201g/t Ag, 1.0% Pb, 6.4% Zn and 0.26% Cu and an inferred resource

of 801Kt averaging 2.5g/t Au, 184g/t Ag, 0.9% Pb, 5.2% Zn and 0.31% Cu. Grade capping on Ag and Zn was performed on 0.75m to 1.24m

length composites. Au, Cu and Pb required no capping. ID

3

was utilized for grade interpolation for Au and Ag while ID

2

was utilized for Cu, Pb

and Zn. Grade blocks were interpreted within constraining mineralized domains using and array of 3m x 1m x 3m blocks in the model. A bulk

density of 3.56 t/m³ was used for all tonnage calculations. Approximate US$ two-year trailing average metal prices as follows were used: Au

$1,300/oz, Ag $17/oz, Cu $3/lb, Pb $1.05/lb and Zn $1.35/lb with an exchange rate of US$0.77=C$1.00.

The C$100/tonne NSR cut-off grade value for the underground Mineral Resource was derived from mining costs of C$70/t, with process costs of

C$20/t and G&A of C$10/t. Process recoveries used were Au 79%, Ag 80%, Cu 81%, Pb 75% and Zn 94%. AuEq and AgEq are based on the

formula: NSR (CDN) = (Cu% * $57.58) + (Pb% * $19.16) + (Zn% * $30.88) +(Au g/t * $39.40) + (Ag g/t * $0.44) - $78.76.

Mineral Resources are not Mineral Reserves, do not have demonstrated economic viability and may be materially affected by environmental,

permitting, legal, title, taxation, socio-political, marketing, or other relevant issues. Inferred Mineral Resources have a lower level of confidence

than Indicated Mineral Resources and may not be converted to a Mineral Reserve but may be upgraded to an Indicated Mineral Resource with

continued exploration. The Mineral Resources were estimated using the Canadian Institute of Mining, Metallurgy and Petroleum (CIM), CIM

Standards on Mineral Resources and Reserves, Definitions and Guidelines.

The Mineral Resource Estimate was prepared by Eugene Puritch, P.Eng., FEC, CET and Yungang Wu, P.Geo., of P&E Mining Consultants Inc.

("P&E") of Brampton, Ontario, Independent Qualified Persons ("QP"), as defined by National Instrument 43-101. P&E Mining suggests that an

underground mining scenario is appropriate for the project at this stage and has recommended a CDN$100/tonne NSR cut-off value for the base-

case resource estimate.

Robert Macdonald, MSc. P.Geo, is VP Exploration of Equity Metals Corporation and a Qualified Person

as defined by National Instrument 43-101. He is responsible for the supervision of the exploration on the

Silver Queen project and for the preparation of the technical information in this disclosure.

On behalf of the Board of Directors

"Joseph Anthony Kizis, Jr."

Joseph Anthony Kizis, Jr., P.Geo

President, Director, Equity Metals Corporation

For further information, visit the website at

https://www.equitymetalscorporation.com

; or contact us at

604.641.2759 or by email at

[email protected]

.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the

policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this

release. This news release may contain forward-looking statements. Forward-looking statements

address future events and conditions and therefore involve inherent risks and uncertainties. Actual

results may differ materially from those currently anticipated in such statements. Factors that could

cause actual results to differ materially from those in forward looking statements include the timing

and receipt of government and regulatory approvals, and continued availability of capital and

financing and general economic, market or business conditions.

Equity Metals Corporation does not

assume any obligation to update or revise its forward-looking statements, whether as a result of new

information, future events or otherwise, except to the extent required by applicable law.

To view the source version of this press release, please visit

https://www.newsfilecorp.com/release/84210