EQTY.V · 2018-09-27 12:00:00

2018 Full Drilling results from Silver Queen

Drill Results

New Nadina Explorations Limited TSX - V - NNA

Box 130, 1215 Greenwood Street, Greenwood, BC V0H 1J0

Phone (250) 445 2260, Fax (250) 445 2259 [email protected]

News Release

2018 Full Drilling results from Silver Queen

September 27, 2018: GREENWOOD, BRITISH COLUMBIA – New Nadina Explorations Limited (the

"Company", TSX VENTURE: NNA) is pleased to provide an update and to provide complete results for the three

hole drill program at its 100% owned Silver Queen property near Owen Lake, BC.

Access to Private Property: John Jewitt, President, and Tony Jewitt, CFO, are currently onsite at the Silver

Queen Property. In order to facilitate the reinstatement of the suspended Free Miner’s Certificate (FMC) onsite

meetings have been held with Ministry of Mines personnel and the private property landowner to reach common

ground to accommodate both needs (NR Sept 14, 2018) . Required reclamation, once approved by the Mines

Inspector will be conducted to satisfy the Chief Gold Commissioner terms for FMC re-instatement. We

anticipate that prior to submitting a five year exploration plan, downhole geophysics will be conducted in and

surrounding the Blue Zone area. The information gathered will assist in placing the drill holes effectively. A

number of other untested targets that arose from the 2011-2012 geophysics can now be tested through favorable

access to private property.

2018 Drill Results: Drilling commenced May 17, 2018 and 3,052.5m was completed by the first week in July.

Three holes in total were completed (with one abandoned due to excessive hole deviation). All three holes were

targeting the “Blue Zone”, which is a conductivity anomaly outlined by IP geophysics.

Unfortunately, the timing and scope of the program did not result in a definitive explanation for the existence of

the “Blue Zone”. This fact, along with the anomalous values intercepted in this drill campaign leaves room for

the existence of a significant mineralized body in the area. Further exploration is required to systematically

cover this ground.

Results of the first hole drilled in 2018, 18S-01, was previously released (NR July 23, 2018). Based on the initial

run of assays, additional sampling was undertaken to determine if any significant zones were missed.

18S-02 was drilled at a heading of 038 o, with a dip of - 50o for a total downhole depth of 893.2m while

18S-03A was drilled at a heading at 090o, dipping -50o, ending at 902m downhole. All three holes were drilled

initial using HQ core diameter, and subsequently reduced to NQ2 core size where drilling difficulties were

encountered. Note the 18S-03A is a re-drill of hole 18S-03, which was abandoned at 135.3m due to unfavourable

hole deviation which would have resulted in completely missing the target area.

A plan map of the 3 holes is shown in Figure 1 and drill sections are shown in Figures 2 to 4. See all links below.

Significant assay intervals are:

Hole 18S-01

Note 1: Previously reported results shown with an asterisk (*) . Au is by FA -AA, other elements are by ICP -OES+MS, then assay grade peroxide

fusion ICP-OES except Ag which is gravimetric.

Hole 18S-02

Sample

From

(m) To (m)

Width

(m)

(g/t)

(%)

(ppm)

(ppm) Cu (ppm)

(ppm)

5094151 0.0 17.2 2 0.258 15.7 1020 712 1300

5094152 17.2 19.2 2.1 0.097 6.78 214 288 2260

5094153 19.2 21.3 0.7 0.133 7.94 204 1010 2840

5094154 21.3 22.0 1.7 0.429 323 1.1 2.95 8.07 > 100 > 10000 > 10000 > 10000

5094155 22.0 23.7 1.8 0.25 0.83 58.8 1440 7640 5100

5094156 23.7 25.5 1.2 0.459 260 2.78 5.39 > 100 7360 > 10000 > 10000

5094157 25.5 26.7 3 0.121 0.97 37.7 930 2580 9730

5094158 26.7 29.7 3 0.037 1.24 40.2 289 5430

5094159 29.7 32.7 2.5 0.065 1.08 2.29 174 244 > 10000

5094165 32.7 49.0 16.3 0.67 1.5 20.8 > 10000 146 1440

5094174 252.9 253.6 0.7 1.93 65.9 4250 1020 6110

5094175 253.6 256.5 2.9 0.337 11.7 499 587 7580

5094176 256.5 258.2 1.7 4.58 270 3 3.23 > 100 > 10000 3650 > 10000

5094177 258.2 261.2 3 0.244 4.83 404 300 1320

5094178 261.2 262.6 1.4 0.163 2.39 250 142 1060

Sample

From

(m) To (m)

Width

(m)

(g/t)

(%)

(ppm)

5094001 284.8 285.8 1.0 0.143 7.21 537 735 3500

5094002 300.3 302.0 1.7 0.16 16.8 1010 2020 1980

5094003 302.0 303.9 1.9 0.066 2.72 19.6 238 811

5094004 308.6 310.9 2.3 0.369 85.4 3690 2430 6900

5094005 310.9 313.0 2.1 0.276 2.68 29.1 846 1820 > 10000

5094006 319.1 320.5 1.4 0.363 100 1.27 4.8 > 100 8100 > 10000 > 10000

5094370* 320.5 323.0 2.5 0.11 2.95 37.3 373 1350

5094007 323.0 324.6 1.6 0.194 5.24 46.8 660 2250

5094008 324.6 325.9 1.3 0.219 18.5 2090 2710 9070

5094371* 325.9 328.7 2.8 0.042 2.92 524 533 1410

5094372* 328.7 330.6 1.9 0.187 9.18 1150 1080 3580

5094009 384.0 385.2 1.2 0.08 8.44 139 117 330

5094010 385.2 386.2 1.0 0.265 36.4 759 446 5620

5094011 405.1 406.1 1.0 0.336 220 2.3 1.32 1.97 > 100 > 10000 > 10000 > 10000

5094012 425.4 426.6 1.2 0.182 0.5 1.62 26.7 314 5030 > 10000

5094127 1060.2 1063.2 3.0 0.187 2.59 41.9 1630 886 > 10000

5094128 1063.2 1065.3 2.1 0.092 23.9 860 1220 8320

5094129 1065.3 1067.3 2.0 0.084 1.55 11.6 489 2210 > 10000

5094131 1067.3 1068.0 0.7 0.793 9.5 93.8 2850 4520 > 10000

5094132 1068.0 1068.8 0.8 0.011 7.88 82 2360 4020 > 10000

5094133 1068.8 1070.8 2.0 0.02 3.74 37.1 1180 1500 > 10000

5094134 1084.0 1086.0 2.0 1.06 2.37 33.8 2860 3100 > 10000

Sample

From

(m) To (m)

Width

(m)

(g/t)

(%)

(ppm)

(ppm) Cu (ppm)

(ppm)

5094179 267.5 269.5 2 0.124 2.08 163 85.5 423

5094180 269.5 271.8 2.3 0.422 14.2 986 641 4210

5094186 297.0 298.1 1.1 0.71 57.9 2230 1380 3770

5094187 310.8 311.8 1 0.588 43.6 1930 2070 7720

5094214 588.9 590.4 1.5 0.226 1.95 16.4 1210 786 > 10000

5094219 699.0 701.0 2 0.127 1.96 6.92 387 394 > 10000

5094220 701.0 701.7 0.7 0.665 2.9 10.4 425 504 > 10000

5094221 701.7 702.7 1 0.224 3.97 27.2 589 3500

5094222 702.7 704.6 1.9 0.104 3.22 23.1 196 2130

5094235 837.6 838.6 1 1.34 263 4.53 4.16 > 100 2100 > 10000 > 10000

5094236 838.6 840.0 1.4 0.076 3.58 18.6 391 8610

5094239 851.8 853.8 2 0.55 15.3 43 1400 7000

5094240 853.8 855.8 2 0.282 4.96 18.7 630 2460

5094241 855.8 857.8 2 0.072 2.47 6.3 136 1630

5094242 857.8 858.8 1 0.252 9.37 57.7 993 9050

Hole 18S-03A

Sample

From

(m)

Width

(m)

(g/t)

(%)

(ppm)

(ppm) Pb (ppm)

(ppm)

5094285 385.7 386.7 1 0.21 2.8 18.6 489 2060 > 10000

5094286 390.0 391.2 1.2 0.233 4.9 24.7 753 2970 > 10000

5094291 449.7 452.4 2.7 0.142 4.28 200 250 8880

5094292 454.0 455.4 1.4 0.127 4.98 103 515 6580

5094293 459.0 459.8 0.8 0.234 1.5 5.01 65.9 655 > 10000

5094299 500.1 503.0 2.9 0.073 11.4 70.6 2480 7640

5094326 653.0 654.1 1.1 0.424 4.1 0.9 33 1110 5480 > 10000

5094337 698.0 699.5 1.5 0.281 2.8 15.5 609 1090 > 10000

5094339 704.8 705.8 1 0.15 7.75 227 803 6850

5094362 891.0 893.0 2 0.314 9.76 49.6 1190 7130

5094363 893.0 895.1 2.1 0.139 4.99 94.3 352 7000

5094364 895.1 898.0 2.9 0.11 3.99 123 854 9540

Note 2: Au is by FA-AA, other elements are by ICP-OES+MS, then assay grade peroxide fusion ICP-OES except Ag which is gravimetric.

The locations of the drill holes are shown is Figure 1 and a section of hole 18S-01 is shown in Figure 2.

Figure 1 2018 drillholes over Geophysics https://nadina.com/images/091818-DD-History-Results-map.pdf

See links for Figure 2 to 4:

Figure 2 - Section/Profile for Drill hole 18S-01 https://nadina.com/images/18s01_section.pdf

Figure 3 - Section/Profile for Drill hole 18S-02 https://nadina.com/images/18s02_section.pdf

Figure 4 - Section/Profile for Drill hole 18S-03 and 18S-03a https://nadina.com/images/18s03_03a_section.pdf

Gary Wong, P. Eng., a Qualified Person under the definition in National Instrument 43-101, has reviewed and

approved the technical content of this release.

ON BEHALF OF THE BOARD

“Signed”

John W. Jewitt, P. Eng.,

President and Chief Executive Officer

For further information please visit the website at www.nadina.com

“Neither the TSX Venture Exchange nor its Regulation Service s Provider (as that term is defined in the policies of the TSX Venture Exchange)

accepts responsibility for the adequacy or accuracy of this release.”

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS AND INFORMATION

This news release contains certain "forward -looking information" within the meaning of Canadian securities laws. Actual results may differ

materially from those indicated by such forward -looking information. All information included herein, other than statements of historical fact,

including, without limitation, information regarding future production, is considered forward-looking information and involves various risks and

uncertainties. There can be no assurance that the forward-looking information will prove to be accurate, as actual results and future events could

differ materially from those anticipated in such information. Neither TSX Venture Exchange nor its Regulation Services Provid er (as that term

is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

← Back to feed