Emerita Intersects 3.9 Meters Grading 3.8% Copper, 0.9% Lead , 1.6% Zinc , 2.81 G/T GOLD and 71.26 G/T Silver at El Cura Deposit. Public Consultation Submission Phase of the Aau (Autorizacion Ambiental Unificada) Now Complete.
EMERITA INTERSECTS 3.9 METERS GRADING 3.8% COPPER, 0.9% LEAD , 1.6% ZINC , 2.81 g/t
GOLD AND 71.26 g/t SILVER AT EL CURA DEPOSIT. PUBLIC CONSULTATION SUBMISSION
PHASE OF THE AAU (AUTORIZACION AMBIENTAL UNIFICADA) NOW COMPLETE.
TORONTO, July 9, 2026 - Emerita Resources Corp. (TSX-V: EMO; OTCQB: EMOTF; FSE: LLJA) (the
“Company” or “Emerita”) reports drilling results from its El Cura deposit , part of Emerita’s wholly owned
Iberian Belt West project (“IBW” or the “Project”; Figure 1) which hosts three Volcanogenic Massive Sulfide
(VMS) deposits: La Romanera, El Cura and La Infanta. The Project is currently undergoing a Prefeasibility
Study that will comply with NI 43-101 standards with completion expected in Q3 (see the Company’s press
release dated June 30, 2026). Drilling at El Cura intersected:
• Drill hole EC102 intersected 3.9m grading 3.8% copper, 0.9% lead, 1.6% zinc, 2.81 g/t gold
and 71.26 g/t silver including 2.6m grading 5.5% copper, 1.0% lead, 1.9% zinc, 3.97 g/t gold
and 99.15 g/t silver.
• Drill hole EC099 intersected 6.6m grading 0.9% copper, 1.4% lead, 2.5% zinc, 0.89 g/t gold
and 51.52 g/t silver including 1.4m grading 1.1% copper, 3.7% lead, 5.0% zinc, 1.86 g/t gold
and 175.86 g/t silver.
Figure 1. IBW tenement and locations of La Romanera, El Cura and La Infanta deposits.
Table 1 shows drill hole location and assay data; drill hole traces are shown in map view in Figure 2.
Figures 3 and 4 provide l ong-section and cross -section views respectively. Photos of mineralized core
intercepts are shown in Figure 5.
Table 1: Recent drilling results received for the El Cura deposit. True width in the intercept EC104
is 67% while in the other intercepts the true width ranges between 90 and 100% of the interval
width.
Figure 2. Plan view map showing drill hole traces of the El Cura drilling. Hole traces in this NR
colored red.
Figure 3. Vertical longitudinal section of El Cura deposit, oriented east-west, looking north. Holes
EC099, EC101, EC102, EC103, EC104 and EC105 indicated in red; deposit as presently defined
indicated in green.
Discussion
Exploration at El Cura project reached a significant milestone in June, with more than 100 drill holes
totaling 37,329m now complete since the Company began delineating the deposit in June 2023.
Holes EC102, EC103 and EC105 provide better definition in the upper-central portion of the deposit and
demonstrate continuity in this region. Holes EC099, EC101 and EC104 were drilled on the westward
portion of El Cura indicating the continuation of the deposit in this direction. Approximately 500m of strike
length separates hole EC102 and the deep western intercept of EC104 (see Figures 3 and 4).
El Cura continues to show remarkable copper and gold grades as evidenced by hole EC102, which
intercepted 3.9 m @ 3.8% copper and 2.81 g/t gold; and hole EC105 that intercepted 1.0 m @ 5.4% copper
and 2.95 g/t gold. The two nearest drill holes intercepts are EC087 intercept (2.8m @ 0.7% copper, 0.1%
lead, 0.1% zinc, 1.31 g/t gold, 13.64 g/t silver) and EC097 intercept (4.9m @ 3.5% copper, 0.1% lead,
0.1% zinc, 1.97 g/t gold, 95.63 g/t silver), which are located in a N S section approximately 100 m to the
east (see longitudinal section on Figure 3).
Intercepts range up to 16.9m and the average intercept width at El Cura is 4.2m. Drill hole EC104
represents the deepest and westernmost mineralized intercept to date and maintains this near-average
thickness indicating potential for additional resource expansion to the west. along strike and down-dip at
modest depths. The Company will resume resource expansion in the next phase of El Cura drilling.
Permitting Update
Further to the Company’s May 13, 2026 announcement that the IBW Project’s Environmental Authorization
(Autorización Ambiental Unificada; “AAU”) for its Exploitation Permit advanced to the public consultation
stage, we are pleased to announce that the public comment phase is now concluded in accordance with
the applicable procedure under the Andalusian Environmental Management Act (GICA).
All public comments have been submitted to the Andalucian Environment Department (the “Authorities”)
in Huelva Province. The Authorities previously confirmed that the IBW Project met the regulatory
requirements necessary for the public consultation process to move forward. They will now review and
evaluate the submitted comments from both the public and other government agencies and address them
based on the information provided by Emerita for the Project. This process is entirely managed by the
Authorities, and will result in the issuance of the Environmental Opinion (Dictamen Ambiental) once their
review is completed.
The Environmental Opinion will present the Administration's conclusions after considering the public
consultation submissions, the reports issued by the relevant authorities and the technical documentation
submitted during the permitting process. It sets out the environmental conditions and conclusions that will
form the basis for the final AAU decision. This review process does not have a specific timeline and
typically takes a few months to complete.
Following the issuance of the Environmental Opinion, interested parties will be granted a 15 -day hearing
period before the procedure moves towards the final decision on the AAU.
“We welcome all feedback received during the public consultation period as it is an opportunity for the
Company to understand any overarching concerns regarding the IBW Project development as well as
indications of support from local stakeholders ” states Joaquin Merino, P.Geo, President and CEO of
Emerita Resources, “Emerita recognizes that this project can only move forward with the support of the
community and the authorities. Understanding and addressing the comments received is an integral step
in securing the social license necessary to advance IBW to a construction decision.”
Figure 4. Interpretive geological cross sections. A: Section 649450E showing holes EC101 and
EC104 B: Section 649500E showing holes EC099 and EC101. C: Section 649750E showing holes
EC103 and EC105. D: Section 649800E showing hole EC102.
Figure 5. Photoplates of El Cura drillcore as described in this release: A: EC099 polymetallic
massive sulphide with sphalerite and galena -rich millimetric to centimetric veinlets. B: EC101
chalcopyrite-rich veins and crystals with minor pyrite in a silicified acid tuff. C: EC102 polymetallic
massive sulphide with chalcopyrite in millimetric crystals with sphalerite and galena- rich
millimetric to centimetric veinlets.
Figure 5 continued. Photoplates of El Cura drillcore as described in this release: D: EC103 fine-
banded polymetallic massive sulphide with chalcopyrite crystals and fine sphalerite and galena-
rich veinlets. E: EC104 pyritic massive sulphide with millimetri c chalcopyrite crystals and quartz
veining. F: EC105 banded polymetallic massive sulphide characterized by alternating centimetric
bands of chalcopyrite and galena-sphalerite.
Quality Assurance/Quality Control
Drilling at El Cura is HQ size and core is placed into core trays at the drill site and transported directly from
the site to Emerita’s coreshack (15Km) from El Cura. Once the cores are received at Emerita's coreshack
they are photographed, and geotechnical logging is performed. Geological, mineralogical and structural
logging follows and mineralized zones are identified. The samples are marked every 1m or less, and
respecting lithological contacts, with most of the samples 1.0m long. The zone immediately above and
below the mineralized zones are also sampled. Core samples are sawed in half and half of the core is
returned to the core tray for future reference. Once the core samples are cut, bagged and tagged, they are
shipped to the ALS laboratory in Seville by Emerita personnel where sample preparation is done. In Seville,
ALS performs the mechanical preparation of the samples and then the pulps are sent to ALS Ireland (ICP)
and ALS Romania (fire assay). The analysis at ALS Lab corresponds to the ME -ICPore (19 elements)
package, together with the Au-AA23 fire assay (Gold). ALS is independent of Emerita.
Greater than 15% of the analyzed samples correspond to control samples (fine blanks, coarse blanks,
high, medium and low -grade standards). When the analysis is completed, the certificates are received
from the laboratory and the QA/QC protocol identifies any deviation or anomaly in the results and the entire
batch is re-assayed in such case. Once the data is approved by the QA/QC protocol assays are entered
digitally directly into the database.
Qualified Person
Scientific and technical information in this news release has been reviewed and approved by Danniel
Oosterman, P.Geo., who is a “Qualified Person” as defined by National Instrument 43-101 – Standards of
Disclosure for Mineral Projects (“NI 43-101”) and Project Director of Emerita Resources Corp.
About Emerita Resources Corp.
Emerita is a natural resource company engaged in the acquisition, exploration, and development of mineral
properties in Europe, with a primary focus on exploring in Spain. The Company’s corporate office and
technical team are based in Sevilla, Spain with an administrative office in Toronto, Canada
For further information, contact:
Ian Parkinson
+1 647 910-2500 (Toronto)
www.emeritaresources.com
Cautionary Note Regarding Forward-looking Information
This press release contains “forward -looking information” within the meaning of applicable Canadian
securities legislation. Forward- looking information includes, without limitation, statements regarding the
prospectivity of the IBW project and El Cura, the mineralization and the IBW project, the expected
completion, timing and results of the NI 43 -101 Prefeasibility Study , the economic viability of the IBW
project, the metallurgy of the IBW project, the Company’s exploration program, the Company’s future
exploration plans and the Company’s future plans. Generally, forward-looking information can be identified
by the use of f orward-looking terminology such as “plans”, “expects” or “does not expect”, “is expected”,
“budget”, “scheduled”, “estimates”, “forecasts”, “intends”, “anticipates” or “does not anticipate”, or
“believes”, or variations of such words and phrases or state t hat certain actions, events or results “may”,