Emerita Intersects 28.3 Meters Grading 5.7% Zinc, 2.4% Lead, 0.3% Copper, 1.4 G/T GOLD and 67.6 G/T Silver IN Deepest Intercept to Date at LA Romanera Deposit
36 Lombard Street West, Floor 4, Toronto, ON, Canada, M5C 2X3
EMERITA INTERSECTS 28.3 METERS GRADING 5.7% ZINC, 2.4% LEAD,
0.3% COPPER, 1.4 G/T GOLD AND 67.6 G/T SILVER IN DEEPEST INTERCEPT
TO DATE AT LA ROMANERA DEPOSIT
TORONTO, February 23, 2023 -- Emerita Resources Corp. (TSX – V: EMO; OTCQB: EMOTF; FSE: LLJA)
(the “Company” or “Emerita”) is pleased to announce additional assay results from the ongoing 2022
- 2023 delineation drilling program at La Romanera Deposit, part of Emerita’s w holly owned Iberian
Belt West project (“IBW” or the “Project”) . IBW hosts three previously identified massive sulphide
deposits: La Infanta, La Romanera and El Cura. Results contained in this press release are from La
Romanera.
Assays have been received from drill hole LR087 (Figure 1 ) which is the deepest intercept at La
Romanera deposit to date and demonstrates that the deposit continues to extend to depth beyond
the existing delineation drilling . The drillhole intersected 28.3 m of polymetallic massive sulphides,
grading 0.3% Cu, 2.4% Pb, 5.7% Zn, 1.4 g/t Au and 67.6 g/t Ag , including 5.5 m grading 0.3% Cu, 6.6%
Pb, 12.0% Zn, 2.5 g/t Au and 93.9 g/t Ag. This intercept is located at approximately 550 m depth
below the surface, and about 70 m below the historical resources footprint of La Romanera deposit,
within the central part of the deposit (Figure 2).
In addition, drill hole LR107 located approximately 100 m east of LR087 intersected 28.6 m of
polymetallic massive sulphides followed by 8 m of chalcopyrite-rich stockwork. Assay results for hole
LR107 are pending. However, this provides additional confirmation that the well mineralized massive
sulphide mineralization is continuing to depth beyond existing drilling.
These holes support deeper drilling to extend the central deeper portion of the deposit to be included
in the forthcoming NI 43 -101 resource estimate . Additi onal drilling has commenced in order to
expand resources both laterally and at depth with the objective of obtaining sufficient drill hole
spacing to allow inclusion of this area within the resource estimate . Drill hole LR021 , located at
450 m elevation at the western flank of the deposit, intercepted 2.5 m of massive sulfide, mainly
pyrite without significant base metal values suggesting possibly a steep plunge to the east for the
depth extension of the deposit. Borehole geophysics will be employed to map the projection beyond
these depths.
According to Joaquin Merino -Marquez, P.Geo., Emerita’s President and Director, “These results in
the deep central zone of the deposit increase the resource potential of La Romanera at depth. The
company will drill step outs around holes LR087 and LR107, at a 50 m by 50 m spacing for resource
estimation. The company maintains 14 rigs on the IBW project. Downhole Electromagnetics and mise
a la masse will be performed on LR087 and two other existing drillholes to map the extensions of
mineralization at depth beyond the current 500 m depth. This technique has been applied on deeper
targets at other locations in the Iberian Pyrite Belt with considerable success. The geological model ,
36 Lombard Street West, Floor 4, Toronto, ON, Canada, M5C 2X3
together with the geophysics, will assist Emerita in better defining the targeting for the deeper drill
holes.”
Figure 1: Plan map showing drill hole trace surface projections, La Romanera deposit.
36 Lombard Street West, Floor 4, Toronto, ON, Canada, M5C 2X3
Figure 2: Longitudinal section showing intercepts in the Lower Lens, La Romanera Deposit. Holes
LR087 and LR107 have intersected wide zones of well mineralized massive sulphides and
demonstrate the deposit remains open for further expansion at depth.
Table 1: Diamond drill hole data, La Romanera deposit.
DDH Easting Northing Elevation azimuth dip depth
(m) FROM TO Width
(m) Cu_% Pb_% Zn_% Au_g/t Ag_g/t LENS
LR087 646751 4172871 154 202 -57 706.2 637.6 665.9 28.3 0.3 2.4 5.7 1.38 67.6 LL
incl. 655.7 661.1 5.5 0.3 6.6 12.0 2.54 93.9 LL
LR021 no significant results
36 Lombard Street West, Floor 4, Toronto, ON, Canada, M5C 2X3
Quality Assurance/Quality Control
Drilling at La Romanera is HQ size and core is placed into core trays at the drill site and transported
directly from the site to Emerita’s coreshack (15Km) from Romanera and (8Km) from Infanta. Once
the cores are received at Emerita's coreshack they are photographed and geotechnical logging is
performed. Geological, mineralogical and structural logging follows and mineralized zones are
identified. The samples are marked every 1m or less, and respecting lithological contacts, with most
of the samples 1.0m long. The zone immediately above and below the mineralized zones are also
sampled. Core samples are sawed in half and half of the core is returned t o the core tray for future
reference. Once the core samples are cut, bagged and tagged, they are shipped to the ALS laboratory
in Seville by Emerita personnel where sample preparation is done. In Seville, ALS performs the
mechanical preparation of the sa mples and then the pulps are sent to ALS Ireland (ICP) and ALS
Romania (fire assay). The analysis at ALS Lab corresponds to the ME -ICPore (19 elements) package,
together with the Au-AA23 fire assay (Gold).
10% of the analyzed samples correspond to control samples (fine blanks, coarse blanks, high, medium
and low grade standards). In addition, 10% of pulps are reanalyzed at a second independent certified
laboratory (AGQ Lab Sevilla). When the analysis is completed, the certificates are received from the
laboratory and the QA/QC protocol identifies any deviation or anomaly in the results and the entire
batch is reassayed in such case. Once the data is approved by the QA/QC protocol assays are entered
digitally directly into the database.
Qualified Person
The scientific and technical information in this news release has been reviewed and approved by Mr.
Joaquin Merino, P.Geo, President of the Company and a Qualified Person as defined by NI 43-101 of
the Canadian Securities Administrators.
About Emerita Resources Corp.
Emerita is a natural resource company engaged in the acquisition, exploration and development of
mineral properties in Europe, with a primary focus on exploring in Spain. The Company’s corporate
office and technical team are based in Sevilla, Spain with an administrative office in Toronto, Canada.
For further information, contact:
Vincent Chen
+1 778 990 9433 (Toronto)
36 Lombard Street West, Floor 4, Toronto, ON, Canada, M5C 2X3
Cautionary Note Regarding Forward-looking Information
This press release contains “forward-looking information” within the meaning of applicable Canadian
securities legislation. Forward-looking information includes, without limitation, the mineralization of
the IBW Project; the timing of assay results; the prospectivity of the Project; the timing and ability of
the Company to produce an NI 43 -101 compliant mineral resource estimate and the Company’s
future plans. Generally, forward-looking information can be identified by the use of forward-looking
terminology such as “plans”, “expects” or “does not expect”, “is expected”, “budget”, “sche duled”,
“estimates”, “forecasts”, “intends”, “anticipates” or “does not anticipate”, or “believes”, or variations
of such words and phrases or state that certain actions, events or results “may”, “could”, “would”,
“might” or “will be taken”, “occur” or “be achieved”. Forward - looking information is subject to
known and unknown risks, uncertainties and other factors that may cause the actual results, level of
activity, performance or achievements of Emerita, as the case may be, to be materially different from
those expressed or implied by such forward-looking information, including but not limited to: general
business, economic, competitive, geopolitical and social uncertainties; the actual results of current
exploration activities; risks associated with oper ation in foreign jurisdictions; ability to successfully
integrate the purchased properties; foreign operations risks; and other risks inherent in the mining
industry. Although Emerita has attempted to identify important factors that could cause actual
results to differ materially from those contained in forward-looking information, there may be other
factors that cause results not to be as anticipated, estimated or intended. There can be no assurance
that such information will prove to be accurate, as actual results and future events could differ
materially from those anticipated in such statements. Accordingly, readers should not place undue
reliance on forward-looking information. Emerita does not undertake to update any forward-looking
information, except in accordance with applicable securities laws.
NEITHER TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS
DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE
ADEQUACY OR ACCURACY OF THIS RELEASE.