Electric Metals Ore Sorting Assessment Indicates Potential to More Than Double Emily Manganese Feed Grade While Recovering 92% of Contained Manganese Drill Core Dataset Averaging 8.2% Mn Simulated to Upgrade to 17.5% Mn While Rejecting
1
Electric Metals Ore Sorting Assessment Indicates Potential to More Than Double Emily Manganese Feed
Grade While Recovering 92% of Contained Manganese
Drill Core Dataset Averaging 8.2% Mn Simulated to Upgrade to 17.5% Mn While Rejecting
Approximately 57% of Material Prior to Processing
Higher-selectivity simulated sorting scenarios produced concentrate grades approaching 33% Mn
Wilmington, Delaware, June 30, 2026 – Electric Metals (USA) Limited (TSXV: EML| OTCQB: EMUS)
(“Electric Metals” or the “Company”) is pleased to report positive results from an ore sorting assessment
completed by Rados International Technologies ("Rados") on drill core from the Emily Manganese Deposit,
part of the Company's North Star Manganese Project in Minnesota. The results show that particle-scale
ore sorting upgraded a drill core dataset, averaging approximately 8.2% Mn, to approximately 17.5% Mn
while recovering approximately 92% of the contained manganese. This means 57% of the material could
potentially be rejected prior to downstream processing while retaining approximately 92% of the
contained manganese.
"These results demonstrate that ore sorting has the potential to be a significant value -enhancing
technology for the Emily Manganese Deposit,” said Brian Savage, Chief Executive Officer of Electric
Metals. “The work demonstrates that material previously below our 10% cut-off grade could be upgraded
to the same grade contemplated in our current development plan for the Emily Deposit, highlighbng the
potenbal for ore sorbng to turn sub-cut-off mineralizabon into economic ore, subject to further economic
evaluabon.”
The work supports Electric Metals' strategy of evaluating advanced sensor -based pre-concentration
technologies capable of upgrading ore feed grade, reducing downstream processing costs, improving
project economics and enhancing the utilization of mineralized material within the deposit.
The evaluation utilized the Rados XRF+ Drill Core Analyzer ("DCA"), which scanned approximately 4,200
feet of drill core from 18 drill holes at high resolution. The resulting dataset was calibrated against
laboratory assays and used to simulate the performance of XRF-based ore sorting under a range of
operating scenarios. The results demonstrate that the Emily manganese mineralization exhibits the grade
variability and geological characteristics required for successful sensor-based ore sorting.
For a project like what is being explored in Emily, the results could translate into lower transportation,
crushing, grinding, leaching, reagent consumption, material handling and tailings management costs while
improving overall project economics. The technology may also help mitigate mining dilution and provide
additional flexibility in mine planning and resource utilization.
The study also confirms that the Emily Deposit exhibits the degree of natural geological variability required
for commercial-scale ore sorting applications. Rados concluded that the Emily Deposit is technically well
suited to both XRF-based particle sorting and bulk ore sorting and recommended further engineering and
economic evaluation.
2
The Company intends to incorporate the results into ongoing engineering studies evaluating the optimal
development pathway for the Emily Manganese Deposit and the broader North Star Manganese Project,
which aims to establish a fully domestic U.S. supply chain for high-purity manganese products used in
electric vehicle batteries, energy storage systems, defense applications, technology applications and
industrial markets.
Rados DCA Setup at the North Star Manganese Project Core Storage Facility in Emily, Minnesota
Highlights
• Simulated particle-scale ore sorting upgraded a drill core dataset, averaging approximately 8.2% Mn
to approximately 17.5% Mn while recovering approximately 92% of the contained manganese.
• Approximately 57% of the material could potentially be rejected prior to downstream processing
while retaining approximately 92% of the contained manganese.
• The study demonstrates the potential for sensor-based pre-concentration to enhance the economic
utilization of lower-grade mineralized material.
• Simulated bulk ore sorting upgraded a drill core dataset averaging approximately 8.2% Mn to
approximately 13.1% Mn while recovering approximately 92% of contained manganese.
• Higher-selectivity simulated sorting scenario at an 18% threshold produced concentrate grades
approaching 33% Mn.
• Progressive rejection of iron-bearing material was observed in simulated sorting scenarios at higher
manganese thresholds, indicating potential downstream metallurgical benefits.
• Strong short-range manganese variability is confirmed throughout the deposit, a key prerequisite for
successful sensor-based ore sorting.
• Excellent correlation between XRF measurements and laboratory assays, with calibration accuracy of
approximately R² = 0.97 for manganese and R² = 0.98 for iron.
• More than 132,000 particle-scale measurements collected from approximately 4,200 feet of drill core
across 18 drill holes.
3
What Makes This Result Important?
Metric Mn Grade
Current Emily Resource Cutoff Grade 10.0% Mn
Current Emily Resource Grade - Indicated
Current Emily Resource Grade - Inferred
Average Grade of Dataset Evaluated by Rados
19.3% Mn
17.5% Mn
8.2% Mn
Simulated Ore Sorting Product Grade 17.5% Mn
Simulated Manganese Recovery 92%
While the reported sorting results are based on numerical simulations calibrated against laboratory assays
rather than physical sorting trials, the study demonstrates that material averaging below the Company's
current resource cutoff grade may potentially be upgraded to a grade substantially above the cutoff while
retaining approximately 92% of the contained manganese.
In simulated ore sorting scenarios based on more than 132,000 high -resolution XRF measurements,
manganese feed grade more than doubled while recovering approximately 92% of the contained
manganese and rejecting more than half of the material before it entered the processing circuit.
The study also confirmed the short-range grade variability required for successful ore sorting and
demonstrated that the technology can accurately distinguish between higher -grade and lower-grade
manganese-bearing material.
Perhaps most importantly, these results suggest that ore sorting may provide a pathway to economically
utilize portions of the deposit that would otherwise be difficult to process efficiently. If confirmed through
future physical test work, engineering studies and economic evaluations, this could materially enhance
project economics and improve resource utilization."
A particularly significant outcome of the study is that the dataset evaluated by Rados averaged
approximately 8.2% Mn. Through simulated ore sorting, that material was upgraded to approximately
17.5% Mn while recovering approximately 92% of the contained manganese. These results suggest that
ore sorting may provide a pathway to economically utilize lower-grade portions of the deposit while
preserving manganese recovery.
In a simulated particle-scale sorting scenario at a 10 mm size fraction and a 4% Mn sorting threshold,
manganese grade was upgraded from approximately 8.2% Mn to 17.5% Mn while recovering
approximately 92% of the contained manganese. At this operating poin t, approximately 57% of the
material was rejected while retaining the vast majority of the contained manganese.
Under a simulated bulk ore sorting scenario at the same 4% Mn cut-off, manganese grade increased from
approximately 8.2% Mn to 13.1% Mn while recovering approximately 92% of the contained manganese.
These results demonstrate the potential for meaningful pre-concentration before downstream processing
and indicate that substantial waste rejection can be achieved while preserving manganese recovery.
4
At a more selective simulated sorting threshold of 18%, particle sorting scenarios achieved concentrate
grades approaching 33% Mn, demonstrating the potential to produce a high -grade manganese
concentrate. The results illustrate a range of operating scenarios that can be optimized in future
engineering studies depending on project objectives and economic conditions.
The study also demonstrated that iron increasingly reports to the discard stream at higher manganese
sorting thresholds, suggesting that ore sorting may provide additional metallurgical benefits through the
early rejection of iron-bearing material before hydrometallurgical processing.
These preliminary results suggest that the Emily Manganese Deposit is amenable to XRF -based pre-
concentration. The successful deployment of pre-concentration methods such as ore sorting could
provide the opportunity for:
• Low-impact manganese upgrading utilizing physical separation processes without chemicals or water
consumption;
• Reduction of ore shipment volumes through removal of gangue and low -grade material prior to
processing;
• Potential reductions in crushing, grinding, reagent consumption, material handling requirements and
tailings generation; and
• Potential enhancement of overall project economics through improved feed grade and waste
rejection.
About the Test Program
The ore sorting assessment was completed by Rados International Technologies using its proprietary XRF+
Drill Core Analyzer. A total of 684 drill core trays representing approximately 4,200 feet of core from 18
drill holes were scanned at 10 mm intervals. The resulting dataset was calibrated against laboratory assays
and used to estimate sorter performance through numerical simulation of multiple operating scenarios.
No physical ore sorting trials were conducted as part of this program. The study concluded that the Emily
Deposit is technically well suited to XRF -based ore sorting and identified clear opportunities for
manganese grade upgrading and waste rejection prior to processing.
The results reported herein are based on simulated ore sorting performance derived from high-resolution
XRF analysis of drill core and calibration against laboratory assays. Actual commercial ore sorting
performance may differ and will require confirmation through future physical test work, engineering
studies and economic evaluations.
Qualified Person
The scienbfic and technical informabon in this news release was reviewed and approved by Ronald A.
Steiner, Ph.D., C.P .G. #12248, an independent consultant with Big Rock Explorabon and a Qualified Person
as defined under NI 43-101.
Legal Proceeding
The Company advises that its wholly-owned subsidiary, North Star Manganese Inc (“North Star”), has been
named as a defendant in a lawsuit filed on April 21, 2026 in the District Court for the Ninth Judicial District,
Crow Wing County, Minnesota. The plaintiff alleges that certain historical royalty and mining
arrangements relating to the Emily manganese deposit were breached by other defendants and asserts
non-contract claims against North Star in connection with the agreements through which North Star holds
5
its interest in the Emily manganese project, the Company’s principal asset. The plaintiff seeks monetary
damages, declaratory relief regarding those agreements, and other relief.
North Star believes the claims against it are without merit and intends to assert all available defenses and
rights in the action. Under the agreements governing North Star’s interest in the project, Cooperative
Mineral Resources, LLC (“CMR”) is responsible for complying with any obligations of CMR to the plaintiff,
and is required to defend, indemnify and hold North Star harmless with respect to such claims, including
related costs. Litigation is inherently uncertain, and the Company cannot predict the outcome or timing
of the matter. An adverse determination could have a material adverse effect on the Company’s interest
in the Emily manganese project and on the Company.
About Electric Metals USA Limited
Electric Metals (USA) Limited (TSXV: EML; OTCQB: EMUS) is a U.S.-domiciled critical minerals and
advanced materials company developing the North Star Manganese Project to establish a fully
domestic U.S. supply of high-purity manganese products for battery, defense, infrastructure,
technology, and industrial markets.
The Company’s principal asset is the Emily manganese deposit in Minnesota, the highest -grade
manganese deposit in North America. The North Star Manganese Project is a 100% U.S. domestic
project comprising a manganese mine in Emily, Minnesota, and a U.S. -based processing facility
designed to produce high-purity manganese sulfate monohydrate (HPMSM) and electrolytic
manganese metal (EMM). The project has been the subject of extensive technical work, including a
Preliminary Economic Assessment prepared in acco rdance with National Instrument 43 -101
Standards of Disclosure for Mineral Projects.
Electric Metals’ mission is to strengthen America’s critical mineral independence by developing a
secure domestic supply of high-purity manganese chemical and metal products for North American
electric vehicle and energy storage batteries, defense applications, critical infrastructure, specialty
alloys, advanced technologies, and industrial uses.
With manganese playing an increasingly important role in lithium-ion battery formulations and with
no current domestic U.S. production of manganese ore, HPMSM, or EMM, the development of the
North Star Manganese Project represents a strategic opportunity to reduce dependence on foreign
supply chains and support U.S. industrial, energy, and national security priorities.
For further informaZon, please contact:
Electric Metals (USA) Limited
Brian Savage
Chief Execubve Officer & Director
(303) 656-9197
Forward-Looking InformaZon
This news release contains "forward-looking information" and "forward-looking statements" (collectively,
"forward-looking information") within the meaning of applicable securities laws. Forward -looking
information is generally identifiable by the use of words such as "believes," "expects," "plans," "intends,"
"anticipates," "estimates," "projects," "may," "will," "could," "would," and similar expressions.
6
Forward-looking information in this news release includes, without limitation: statements regarding the
potential application of sensor-based ore sorting technologies at the Emily Manganese Deposit; the
potential for ore sorting to upgrade ore feed grade, reject waste material, reduce processing costs, lower
reagent consumption, decrease tailings volumes, improve metallurgical performance, and enhance
overall project economics; the incorporation of ore sorting results into future engineering, economic, and
development studies; the potential development of the Emily Manganese Deposit and the broader North
Star Manganese Project; the establishment of a fully domestic U.S. manganese supply chain; the future
production of high-purity manganese products; the strategic importance of manganese to U.S. industry;
the Company's future plans, objectives, and development strategy; and statements regarding the legal
proceeding described under “Legal Proceeding” above (the “Proceeding”), including the Company's belief
that the claims against North Star under the Proceeding are without merit, North Star's intention to
defend the matter, the anticipated conduct and outcome of the Proceeding and any related arbitration,
the timing and nature of any conclusion, verdict or result which may be reached in the Proceeding, and
the availability, scope, enforceability, and sufficiency of the contractual indemnity in favor of North Star,
as well as the effects of the Proceeding on the Company both during the course of such Proceeding and
as a result of any conclusion, verdict or result reached in the legal proceeding.
Forward-looking information is based on management's current expectations, estimates, assumptions,
and beliefs as of the date of this news release, including assumptions regarding the technical applicability
and economic benefits of ore sorting technologies, the continuity and characteristics of mineralization at
the Emily Manganese Deposit, the results of future engineering and economic studies, the validity and
enforceability of the Company's agreements relating to the North Star Manganese Project, expectations
with respect to the expected result from the Proceeding and timing for the Proceeding to be concluded,
expectations with respect to the cost of the Proceeding to the Company, expectations with respect to
how third parties may view the Proceeding and the effects of such Proceeding on the ability of the
Company to conduct its business as currently or proposed to be conducted, and the availability and
sufficiency of the contractual indemnity in favor of North Star, and prevailing market, regulatory, and
economic conditions.
Such forward-looking information involves known and unknown risks, uncertainties, and other factors
that may cause actual results, performance, or achievements to differ materially from those expressed or
implied by such forward-looking information. These risks and uncertainties include, without limitation:
the risk that future test work, engineering studies, or economic analyses may not confirm the anticipated
benefits of ore sorting; changes in project design or development plans; variations in mineraliza tion
characteristics; metallurgical and processing risks; the results of future technical and economic studies;
the ability to obtain necessary permits, approvals, financing, and regulatory authorizations; fluctuations
in manganese and other commodity prices; changes in market conditions and demand for manganese
products; the inherent uncertainty of litigation and arbitration and the risk of an unfavorable judgment,
award, or settlement in the legal proceeding described above; the risk that an adverse outcome could
impair the Company’s interest in the North Star Manganese Project; the risk that the contractual
indemnity in favor of North Star may be unavailable, insufficient, or uncollectible or may not cover all
liabilities or costs associated with the Proceeding; the risk that the Proceeding may not be concluded as
expected by the Company or on the timeline expected by the Company ; the costs and diversion of
management resources associated with defending the proceeding; general economic, market, business,
environmental, and regulatory conditions; and the other risk factors disclosed in the Company’s
continuous disclosure record on its profile on SEDAR+ at www.sedarplus.ca.
7
Although the Company believes the assumptions and expectations reflected in the forward -looking
information are reasonable, there can be no assurance that such information will prove to be accurate.
Readers should not place undue reliance on forward-looking information, as actual results and future
events may differ materially from those anticipated. Except as required by applicable law, the Company
undertakes no obligation to update or revise any forward-looking information to reflect new events or
circumstances.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.