Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

ELO.TO ·

Eloro Outlines Major New Mineralized Trend on La Victoria Project, Peru; Sample Results Return Values To 33 Grams Gold Per Tonne

Exploration Programs Sampling & Geoscience Results

Eloro Outlines Major New Mineralized Trend on La Victoria Project,

Peru; Sample Results Return Values To 33 Grams Gold Per Tonne

Toronto, Canada, June 13, 2017 – Eloro Resources Ltd. (TSX-V: ELO; FSE: P2Q; “Eloro”) is pleased

to announce that the ongoing reconnaissance geological mapping and sampling program has outlined a

major new mineralized trend in the Victoria South ar ea of the La Victoria Gold-Silver Project, Ancash

Department, in the North-Central Mineral Belt of Peru. This mineralized area appears to be closely

associated with the Puca Fault, a major northeast-southwe st striking regional fault that is a likely feeder

structure for multiple stages of epithermal gold-silver mineralization on the property (Figures 1, 2 and 3).

Geologically the style of mineralization is similar to th at of Rufina located approximately 1.7 kilometres to

the southwest (Figures 1 and 3) and is the likely northern continuation.

Assays from an initial twenty-two rock chip samples returned encouraging results (Figure 2; Table 1):

• 33.02 grams gold per tonne (g Au/t) over 0.30 metres across a quartz vein with arsenopyrite and

pyrite, in intrusive diorite;

• 8.02 g Au/t over 0.20 metres, in the inters ection of a series of low-angle structures;

• 5.46 g Au/t Au gold across a 0.30-metre-wide quartz vein in altered diorite, with disseminated

arsenopyrite and pyrite.

In addition to the higher-gr ade bonanza-style gold mineralization, significant results were also returned

from limited sampling of the host breccia zones including 13.66 g Au/t over 1.10 metres, 2.73 g Au/t over

0.20 metres and 1.10 g Au/t over 0.60 metres. Much of the mineralized breccia is not well exposed and

has been heavily oxidized hence trenching will be required to more accurately assess its potential.

The new mineralized zone at Victoria South is approximately 170 metres wide and strikes northwest-

southeast extending for at least 1 kilometre along strike (Figure 2). It appears likely (see Figure 1 and 3)

that this zone is the southern continuation of the mineralized zone at San Markito which is marked by

strong induced polarization anomalies that also tr end northwest-southeast. This would suggest the

potential strike length may be more than 3 kilometres. A second target at Victoria South, the breccia

zone, that trends northeast-southwest for approximat ely 850 metres, is up to 200 metres wide and is a

potential target for bulk tonnage mineralization. Trenc hing is required to better expose this zone for

sampling.

Tom Larsen, President & CEO of Eloro commented: “We are very encouraged by the results of the

geological work which continues to expand our know n mineralized zones and outline additional targets

for diamond drilling. Our Peruvian-based team lead by Vice President, Exploration Luc Pigeon, P.Geo.,

is working on completing the final details for pe rmitting of the planned diamond drilling program. In

addition, a new DIA will be filed for proposed drilling in the Victoria South and Ccori Orrco target areas

based on the new promising results.”

Dr. Bill Pearson, P.Geo., Chief Technical Advisor to Eloro commented: “Our geological work continues to

show that there is an extensive multi-phase epither mal gold-silver mineralizing system on La Victoria

property centred around the Puca Fault and environs (Figures 1 and 3). Gold mineralization occurs in a

variety of structural settings both parallel to the no rtheast trending Puca Fault as well as perpendicular

along likely tear faults related to this structure. Mineralization has been identified vertically over 1

kilometre from elevation 3100 metres at Rufina to elevation 4200m at San Markito as well as along strike

on different structures for up to 3+ kilometres. We are continuing to focus our work on outlining the best

targets for diamond drilling.”

20 Adelaide Street East, Suite 200, Toronto, Ontario CANADA M5C 2T6 Tel.: (416) 868-9168 Fax: (416) 361-1333

TSX.V Symbol: ELO www.elororesources.com

Table 1: Results of Reconnaissance Chip Sampling, Victoria South

Sample ID Easting Northing Elev(m) W idth(m) Au (g/t) Ag (g/t) Description

C001520 173835 9081780 3757 0.40 0.036 <0.2 Silicified microdiorite dyke

C001521 173831 9081769 3779 0.60 1.10 2 Hydrothermal breccia

C001522 173829 9081756 3775 0.12 2.59 4.3 Quartz vein

C001523 173826 9081754 3774 0.40 0.016 2.7 Hydrothermal breccia

C001524 173825 9081750 3773 0.30 0.16 1 Hydrothermal breccia

C001525 173820 9081742 3770 0.30 0.41 1.7 Quartz vein

C001526 173819 9081736 3769 1.00 0.03 0.5 Stockwork in altered diorite

C001527 173816 9081732 3766 0.12 2.84 22.2 Quartz vein

C001528 173816 9081731 3766 0.30 5.46 5.4 Quartz vein

C001529 173806 9081719 3758 0.50 0.38 1.6 Hydrothermal breccia

C001530 173805 9081718 3759 0.25 0.75 2.1 Hydrothermal breccia

C001531 173802 9081715 3757 0.10 2.42 3.7 Quartz vein

C001532 173800 9081708 3755 0.10 0.26 3.5 Quartz vein

C001533 173777 9081687 3747 0.30 33.02 28 Massive arsenopyrite vein

C001534 173769 9081679 3744 0.25 0.14 2.3 Vein stockwork

C001535 173728 9081660 3730 2.00 0.082 1.6 Altered diorite dyke

C001536 173726 9081661 3730 2.40 0.30 1.6 Altered diorite dyke

C001537 173724 9081662 3730 2.40 0.20 1.9 Altered diorite dyke

C001538 173302 9082070 3912 0.10 0.006 <0.2 Quartz vein

C001539 173555 9081788 3874 0.20 8.02 5.4 Stockwork

C001540 173324 9081411 3608 0.20 2.73 33.9 Hydrothermal breccia

C001541 173554 9081786 3847 1.10 13.66 7.9 Hydrothermal breccia

For all samples, width equals true width; “m” = metres; “g/t” = grams per tonne; “Au” = gold; “Ag” = Silver

Samples were analysed for Au and Ag by fire assay and 31 element ICP analysis at SGS del Peru S.A.C.

In Lima, Peru. In addition to the standard laboratory QA/QC procedures Eloro employs a system of external blanks

and standards.

About Eloro Resources Ltd.

Eloro is an exploration and mine development company which holds a 100% undivided interest in the La

Victoria Gold/Silver Project, located in the prolific North-Central Mineral Belt of Peru. The La Victoria

Gold/Silver Project covers 80.4 square kilometres and is within 50 km of several large, low-cost

producing gold mines, with three producers visible from the property. Infrastructure in the area is good

with access to road, water, and electricity and is located at an altitude that ranges from 3,100m to

4,200m above sea level. Eloro also holds a portfolio of gold and base-metal properties in northern and

western Quebec. For additional technical information on the La Victoria Project, the reader is referred to

the NI 43-101 Technical Report on the La Victor ia Au-Ag Property, Ancash, Peru filed under the

Company’s profile on SEDAR (www.sedar.com).

For further information please contact Jorge Este pa, Vice-President of Eloro Resources Ltd. at

(416) 868-9168.

Information in this news release may contain forward-looking information. Statements containing forward-

looking information express, as at the date of this news release, the Corporation's plans, estimates,

forecasts, projections, expectations, or beliefs as to future events or results and are believed to be

reasonable based on information currently available to the Corporation. There can be no assurance that

forward-looking statements will prov e to be accurate. Actual result s and future events could differ

materially from those anticipated in such st atements. Readers should not place undue reliance on

forward-looking information.

Neither the TSXV nor its Regulation Se rvices Provider (as that term is defined in the policies of the

TSXV) accepts responsibility for the adequacy or accuracy of this release.

Jim Steel MBA, P.Geo., a Qualified Person in the context of NI 43-101 has reviewed and approved the

technical content of this news release.

Figure 1: Geology Plan Map of La Victoria Property Showing Principal Mineralized Areas

(remainder of page left intentionally blank)