ELD.TO · 2018-10-25 12:00:00

Eldorado Gold Provides an Update on 2018 Exploration Programs

Exploration Programs

NEWS RELEASE

TSX: ELD NYSE: EGO October 25, 2018

VANCOUVER, BC - Eldorado Gold Corporation ("Eldorado" or the "Company") is pleased to provide an update

on its exploration activities completed to date in 2018.

2018 Exploration Highlights

 Over 90,300 metres (m) drilled to date in 2018 at 11 exploration projects.

 The discovery of a new wide zone of high-grade extension vein networks in the lower Triangle gold

deposit at Lamaque, Quebec within a mineralized interval of 193.90m grading 3.7 grams per tonne

gold.

 Completion of the initial resource definition drilling program at the Bolcana gold-copper porphyry

project in Romania.

 Identification of along -strike and down -dip extensions of the Mavres Petres polymetallic massive

sulfide orebody at Stratoni, Greece.

Lamaque Project, Quebec

Five drill rigs were active through the year testing extensions to the Parallel Deposit, the lower part of the

Triangle Deposit and other targets within the project area.

At the Triangle Deposit, drillhole TM-15-20 intersected a new zone of stockwork to sheeted extensional vein

networks in the footwall to C10, including closely -spaced intervals of 29.40m @ 5.4 g/t Au, 64.20m @ 4.5

g/t Au, and 19.40m @ 7.5 g/t Au. Although this style of mineralization has been identified previously at the

Triangle Deposit, and was mined historically at the nearby Lamaque Mine, these intervals are significantly

wider than most previous intersections.

The entire interval including the C10 shear vein and the footwall vein network zones totals 193.90m @ 3.7

g/t Au. The network zones are localized within the lower part of the Triangle plug, which at this level forms

an east-west striking subvertical dyke (Figure 1). Together with the existing inferred resource base in the

lower C4, C5, and C7 zones, this ne w discovery highlights the outstanding potential of the Triangle deposit

below those areas included in the 2018 Pre-Feasibility Study.

New drilling results also include multiple high-grade intersections associated with the C9, C9B, and C10 shear

zones. C10 is now defined over a strike length of approximately 400m and a vertical extent of up to 200

metres (Figure 2a). Highest grade and thickest intersections have been from the easternmost drillholes, and

the zone remains open to both the west and east. In addition, the newly-recognized zone C9B, lying midway

between C9 and C10, contains similar grades and thicknesses to C10, and is also open to the east (Figure 2b).

Figure 1: North-south cross section through the lower part of the Triangle Deposit, showing the position of the new

vein network zone relative to the C9 – C10 shear zones and the lower Triangle diorite plug. Red crosslines along drillhole

trace represent density of quartz-tourmaline-carbonate veins.

Figure 2 a (left), Figure 2b (right) : Vertical east -west longitudinal sections of the C9b and C10 shear zone, showing

drillhole piercing points and preliminary grade x true thickness contours. Best grade and thickness occur within or

adjacent to areas where the host shear zone cuts the Triangle plug, which at this level branches into two subparallel

dykes. Both zones are open along strike, and best intercepts are from the easternmost drillholes.

Selected Q3 Drilling Results from the Lower Triangle Deposit, Lamaque

Hole ID From

(m)

Width

(m)

Estimated

true width

(m)

Zone / style Au

(g/t)

(g/t, capped

at 40 g/t)

TM-15-006W02 1618.5 1622.3 3.8 2.44 C9B shear 11.60 8.20

and 1627 1663.3 36.3 vein network 5.18 -

and 1707.4 1716.3 8.9 6.03 C10 shear 3.02 -

and 1760.1 1766.2 6.1

4.93 unassigned shear

vein 6.00

TM-18-321AW02 1720.1 1724.4 4.3 3.62 C9B shear 9.05 -

and 1732.4 1737.2 4.8 4.05 C9B shear 9.38 -

and 1742 1744.4 2.4

1.66 unassigned shear

vein 13.23

and 1746.4 1749.6 3.2 vein network 9.74 -

and 1783 1790.3 7.3 vein network 6.13 -

and 1939.9 1956.1 16.2 vein network 2.27 -

TM-15-020 1500.3 1516.7 16.4 vein network 3.37 2.58

and 1527.7 1531.4 3.7 2.27 C9 shear 8.45 -

and 1536.2 1556.0 19.8 vein network 3.05 -

and 1602.4 1609.3 6.9 3.8 C9B shear 18.95 8.60

and 1620.8 1631.3 10.5 vein network 3.53 2.65

and 1646.5 1670.3 23.8 vein network 3.02 2.88

and 1701.0 1894.9 193.9 shear and network 3.70 3.04

incl. 1701 1706.9 5.9 3.55 C10 shear 9.46 -

and including 1721.8 1726.3 4.5 2.71 C10 shear 6.72 -

and including 1726.8 1756.2 29.4 vein network 5.37 4.98

and including 1806.3 1870.5 64.2 vein network 4.54 3.95

and including 1875.5 1894.9 19.40 vein network 7.48 3.58

TM-15-006W02 1707.4 1716.3 8.9 C10 shear 3.02 -

TM-18-321AW03 1891.5 1898.5 7.0 5.04 shear and network 26.60 17.65

including 1891.5 1896.03 4.53 3.26 C10 shear 40.35 26.51

and 1900.0 1903.0 3.0 vein network 5.03 -

Bolcana, Romania

The 2018 Bolcana gold-copper porphyry drilling program was completed in early Septem ber, for a total of

over 25,000m during the year and 56,000m since the project was acquired in late 2016. The Bolcana deposit

is now drilled off at an approximately 100m spacing to a depth of over 1000m. The drilling has defined three

shallow mineralized centers (North, Central and South) over a strike extent of > 1km, which coalesce at depth

into a north-plunging mineralized core (Figures 3, 4a and 4b). Highest grades coincide with a late-stage gold-

rich dykes that are superimposed on an earlier copper-gold porphyry that intrudes broadly coeval breccias

and andesitic country rocks.

Highlights of the 2018 drilling program include:

 In the Central Zone, extension of the previously identified shallow high grade core including 222m

@ 1.34 g/t Au and 0.38 % Cu in TRSD028 and 224m @ 0.74 g/t Au and 0.24 % Cu in TRSD048, as

well as confirmation of the continuity of the mineralization to the deep central core in TRSD034

with 595m @ 0.77 g/t Au and 0.16% Cu.

(-) Indicates no values exceeded the top cut.

 In the South Zone, an increase in the extent of the high grade mineralization where TRSD-029

intersected 202m @ 1.62 g/t Au and 0.49% Cu and TRSD-050 intersected 232m @ 1.03 g/t Au and

0.24 % Cu.

 In the North Zone, identification of a new high grade mineralized zone, including 88m @ 1.24 g/t

Au and 0.49 % Cu in TRSD047.

Lithology, alteration and mineralization models are now being updated with the new drilling results in

preparation of a preliminary resource estimate for the deposit.

Figure 3: Geological map of the Bolcana Project area showing outline of the Au -Cu por phyry system and traces of

drillholes completed in 2017 and 2018 programs.

Figure 4a (left), Figure 4b (right): Cross section (4a), and longitudinal section (4b) through the Bolcana porphyry system,

showing principal alteration domains and outlines of 0.5 g/t (red) and 1.0 g/t (purple) gold -equivalent grade shells

calculated using prices of $1,250 USD/oz Au and $3 USD/lb Cu. “Mace” alteration zones are characterized by alteration

mineral suite magnetite+albite+chlorite+epidote.

Selected 2018 Drilling Results from Bolcana, Romania

Hole ID From

(m)

Width

(m)

ppm

(%)

TRSD024 368 588 220 0.63 0.19

including 406 570 164 0.76 0.21

TRSD026 292 772 480 0.44 0.16

including 362 716 354 0.51 0.18

TRSD027 0 82 82 1.09 0.08

TRSD028 374 1072 698 0.54 0.20

including 380 602 222 1.34 0.38

TRSD029 282.2 658 375.8 1.00 0.37

including 394 596 202 1.62 0.49

TRSD032 98 726 628 0.42 0.16

including 320 512 192 0.54 0.17

TRSD034 464 1059 595 0.77 0.16

TRSD035 260 722 462 0.42 0.21

TRSD036 58 390 332 0.40 0.16

and 462 646 184 0.40 0.18

TRSD037 336 1029 693 0.43 0.20

including 388 720 332 0.61 0.24

TRSD038 160 310 150 0.49 0.05

TRSD040 182 554 372 0.40 0.18

TRSD041 576 780 204 0.40 0.24

TRSD043 262 543 281 0.51 0.13

TRSD044 94 554 460 0.42 0.18

including 94 142 48 0.86 0.04

TRSD047 128 438 310 0.57 0.28

including 316 404 88 1.24 0.49

TRSD048 64 288 224 0.74 0.24

TRSD049 174 860 686 0.46 0.22

TRSD050 252 717 465 0.73 0.23

including 378 610 232 1.03 0.24

TRSD051 292 723 431 0.45 0.21

Stratoni, Greece

At the Stratoni Mine, three drill rigs have been active through the year targeting along-strike and down-dip

extensions to the Mavres Petres orebody. Of the 23 drillholes that reached target depth, nine intersected

significant thicknesses of massive sulfide. Best results have been from two areas: 1) adjacent to the main

orebody, immediately downdip from parts of the orebody that are currently in production, and 2) in a newly-

recognized mineralized zone approximately 100m west of the lower western extent of the orebody. The

latter was defined by drillholes MP0847 with 24.2m grading 15.5% Zn equivalent, and MP0863 with 23.4m

grading 11.0% Zn equivalent. Both this new zone and the main Mavres Petres orebody remain open in

multiple directions.

Selected 2018 Drilling Results from Stratoni, Greece

Hole_ID From

(m)

Interval

(m)

True

thickne

ss (m)

Ag ppm Pb % Zn % Zn eq %

MP0825 159.20 163.70 4.50 4.00 285 11.8 8.0 24.2

MP0826 142.50 144.70 2.20 2.00 144 6.3 8.7 17.3

MP0827 137.00 153.40 16.40 15.00 224 9.6 10.8 23.9

MP0829 132.60 173.00 40.40 38.00 155 6.0 7.9 16.3

MP0835A 169.1 170.7 1.6 1.6 78 4.54 6.16 12.0

MP0847 229.6 253.8 24.2 14.0 137 5.9 7.4 15.5

and 310.15 312.5 2.35 1.5 415 19.3 8.6 34.6

MP0863 253.1 276.5 23.4 14.3 99 3.9 5.6 11.0

MP0858 141.8 151.2 9.4 7.6 160 7.7 19.0 29.3

MP0862 117.7 122.8 5.1 5.1 108 3.9 23.5 29.0

and 134.7 141 6.3 6.3 48 1.8 7.2 9.7

MP0832, MP0833, MP0834, MP0837, MP0838, MP0839,

MP0844, MP0846, MP0849, MP0855, MP0861, MP0864,

MP0865, MP0867

No significant intercepts

Notes: Zn equivalent formula calculated as Zn% + Pb%*1.1 + Ag ppm/87.7.

About Eldorado Gold

Eldorado is a gold and base metals producer with mining, development and exploration operations in

Turkey, Greece, Romania, Serbia, Canada and Brazil. The Company has a highly skilled and dedicated

workforce, safe and responsible operations, a portfolio of high-quality assets, and long-term partnerships

with local communities. Eldorado’s common shares trade on the Toronto Stock Exchange (TSX: ELD) and

the New York Stock Exchange (NYSE: EGO).

Qualified Persons

Dr. Peter Lewis P.Geo., Eldorado’s Vice President, Exploration, is the qualified person as defined by National Instrument 43-101 Standards of Disclosure

for Mineral Projects ("NI 43-101") responsible for, and has approved the scientific and technical disclosure of the exploration results contained in this

press release. Eldorado operates its exploration programs according to industry best practices and employs rigorous quality assurance and quality

control procedures. All results presented are based on half-core samples of diamond drill core analyzed at accredited laboratories. Drillcore from the

Lamaque project was prepared and analyzed at Bourlamaque Laboratories in Val d’Or, Quebec. All Au assays are based on fire assay analysis of a

30 gm charge followed by an atomic adsorption finish. Samples with Au grades above 5.0 g/t at the Lamaque project and 10.0 g/t at other projects

were re-assayed and completed with a gravimetric finish. Cu grades at Bolcana were determined four-acid digestion with ICP-MS finish and grades

over 0.4% Cu were reassayed with four-acid digestion and an ICP-AES finish. Zn and Pb grades at Mavres Petres were determined from an aqua regia

digestion with an ICP-AES finish. Certified standard reference materials, field dupl icate and blank samples were inserted regularly and were closely

monitored to ensure the quality of the data.

Mineral resources which are not mineral reserves do not have demonstrated economic viability. With respect to “indicated min eral resource” and

“inferred mineral resource”, there is a great amount of uncertainty as to their existence and a great uncertainty as to their economic and legal

feasibility. It cannot be assumed that all or any part of a “measured mineral resource”, “indicated mineral res ource” or “inferred mineral resource”

will ever be upgraded to a higher category.

Cautionary Note about Forward-looking Statements and Information

Certain of the statements made and information provided in this press release are forward-looking statements or information within the meaning of

the United States Private Securities Litigation Reform Act of 1995 and applicable Canadian securities laws. Often, these forward-looking statements

and forward-looking information can be identified by the use of words such as "plans", "expects", "is expected", "budget", “continue”, “projected”,

"scheduled", "estimates", "forecasts", "intends", "anticipates", or "believes" or the negatives thereof or variations of such words and phrases or

statements that certain actions, events or results "may", "could", "would", "might" or "will" be taken, occur or be achieved.

Forward-looking statements or information contained in this release include, but are not limited to, statements or information with r espect to: our

guidance and outlook, including expected production and recoveries of gold, projected all-in sustaining costs and cash operating costs, planned capital

and exploration expenditures; and the outstanding potential for the Triangle deposit at Lamaque; our expectation as to our fu ture financial and

operating performance, including future cash flow, estimated all-in sustaining costs and cash operating costs, expected metallurgical recoveries, gold

price outlook; and our strategy, plans and goals, including our proposed exploration, development, construction, permitting and operating plans and

priorities, related timelines and schedules and proposed share consolidation.

Forward-looking statements and forward -looking information by their nature are based on assumptions and involve known and unknown risks,

uncertainties and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any

future results, performance or achievements expressed or implied by such forward-looking statements or information.

We have made certain assumptions about the forward-looking statements and information, including assumptions about the geopolitical, economic,

permitting and legal climate that we operate in; the future price of gold and other commodities; exchange rates; anticipated costs and expenses;

production, mineral reserves and resources and metallurgical recoveries, the impact of acquisitions, dispositions, suspensions or delays on our business

and the ability to achieve our goals. In particular, except where otherwise stated, we have assumed a continuation of existi ng business operations

on substantially the same basis as exists at the time of this release.

Even though our management believes that the assumptions made and the expectations represented by such statements or informat ion are

reasonable, there can be no assurance that the forward -looking statement or information will prove to be accurate. Many assumptions may be

difficult to predict and are beyond our control.

Furthermore, should one or more of the risks, uncertainties or other factors materialize, or should underlying assumptions prove incorrect, actual

results may vary materially from those described in forward-looking statements or information. These risks, uncertainties and other factors include,

among others, the following: geopolitical and econ omic climate (global and local), risks related to mineral tenure and permits; gold and other

commodity price volatility; recoveries of gold and other metals; results of test work; revised guidance; risks regarding potential and pending litigation

and arbitration proceedings relating to the Company’s, business, properties and operations; expected impact on reserves and the carrying value; the

updating of the reserve and resource models and life of mine plans; mining operational and development risk; foreign country operational risks; risks

of sovereign investment; regulatory risks and liabilities including, regulatory environment and restrictions, and environmental regulatory restrictions

and liability; discrepancies between actual and estimated production, mineral reserves and resources and metallurgical testing and recoveries; risks

related to the impact of the acquisition and integration of Integra on the Company’s operations; additional funding requireme nts; currency

fluctuations; community and non -governmental organization actions; speculative nature of gold exploration; dilution; share price volatility;

competition; loss of key employees; and defective title to mineral claims or properties, as well as those risk factors discus sed in the sections titled

“Forward-Looking Statements” and "Risk factors in our business" in the Company's most recent Annual Information Form & Form 40-F. The reader is

directed to carefully review the detailed risk discussion in our most recent Annual Information Form filed on SEDAR under our Company name, which

discussion is incorporated by reference in this release, for a fuller understanding of the risks and uncertainties that affect the Company’s business and

operations.

Forward-looking statements and information is designed to help you understand management’s current views of our near and longer term prospects,

and it may not be appropriate for other purposes.

There can be no assurance that forward-looking statements or information will prove to be accurate, as actual results and future events could differ

materially from those anticipated in such statements. Accordingly, you should not place undue reliance on the forward -looking statements or

information contained herein. Except as required by law, we do not expect to upda te forward-looking statements and information continually as

conditions change and you are referred to the full discussion of the Company's business contained in the Company's reports fi led with the securities

regulatory authorities in Canada and the U.S.

Financial Information and condensed statements contained herein or attached hereto may not be suitable for readers that are u nfamiliar with the

Company and is not a substitute for reading the Company’s financial statements and related MD&A available on ou r website and on SEDAR under

our Company name. The reader is directed to carefully review such document for a full understanding of the financial information summarized herein.

Except as otherwise noted, scientific and technical information contained in this press release was reviewed and approved by Paul Skayman,

FAusIMM, Chief Operating Officer for Eldorado Gold Corporation, and a "qualified person" under NI 43-101.

Cautionary Note to US Investors Concerning Estimates of Measured, Indicated and Inferred Resources

The terms “mineral resource”, “measured mineral resource”, “indicated mineral resource”, “inferred mineral resource” used her ein are Canadian

mining terms used in accordance with NI 43-101 under the guidelines set out in the Canadian Institute of Mining and Metallurgy and Petroleum (the

“CIM”) Standards on Mineral Resources and Mineral Reserves, adopted by the CIM Council, as may be amended from time to time. These definitions

differ from the definitions in the United States Securities & Exchange Commission (“SEC”) Industry Guide 7. In the United States, a mineral reserve is

defined as a part of a mineral deposit which could be economically and legally extracted or produced at the time the mineral reserve determination

is made.

While the terms “mineral resource”, “measured mineral resource,” “indicated mineral resource”, and “inferred mineral resource” are recognized and

required by Canadian regulations, they are not defined terms under standards in the United States and normally are not permitted to be used in

reports and registration statements filed with the SEC. As such, information contained herein concerning descriptions of mineralization and resources

under Canadian standards may not be comparable to similar information made public by U.S. companies in SEC filings.

Accordingly, information herein containing descriptions of our mineral deposits may not be comparable to similar information made public by US

companies subject to the reporting and disclosure requirements under US federal securities laws and the rules and regulations thereunder.

Contacts

Investor Relations

Peter Lekich, Manager Investor Relations

604.687.4018 or 1.888.353.8166 [email protected]

Media

Louise Burgess, Director Communications & Government Relations

604.687.4018 or 1.888.353.8166 [email protected]

← Back to feed