Cartier Intersects 8.2 g/t Au over 7.0 m on the Chimo Mine Property
For immediate release
Cartier Intersects 8.2 g/t Au over 7.0 m on the Chimo Mine Property
Val-d’Or, January 18th, 201 7 –Cartier Resources Inc. (TSX-V: ECR) (“Cartier”) announces the
results of its drill program on th e East Block of the Chimo Mine property , situated 45 km east of Val-
d’Or. Drilling intersected 8 gold-bearing intervals of interest of w hich some are located up to 650 m
east of the former Chimo Mine (Figures 1 and 2). The results are presented in the following table:
Drill Hole
From
(m)
To
(m)
Length
(m)
Au
(g/t)
Gold
Structure
CH16-01
279.0 286.0 7.0 8.2 2 including 279.0 282.0 3.0 17.7
325.0 326.0 1.0 8.5 3
409.5 410.0 0.5 8.4 4B
CH16-02
328.0 330.0 2.0 11.8 3
422.5 423.5 1.0 88.6 4B
CH16-03 256.0 257.0 1.0 8.6 5M
CH16-04 329.0 338.0 9.0 1.5 5M
CH16-06
260.0 275.0 15.0 3.2 5M including 269.0 273.0 4.0 9.9
Lengths are expressed as measured along the core axis. True thickness has not been determined.
Six (6) drill holes totalling 2,517 m, intersected 4 gold structures in an area with little or no drilling
within the favorable corridor of the property (Figures 1 and 2). The results add potential to increase
the dimension of the known gold -bearing zones and have also demonstrated t he potential of
discovering new gold-bearing zones.
Gold Structure 5M (refer to Figures 1 and 2):
Results of drill holes CH16-06 (9.9 g/t Au / 4 .0 m) and CH16-04 (1 .5 g/t Au / 9 .0 m) increase the
dimension of the gold zone located 650 m east of the former Chimo Mine. Results of drill hole CH16-
03 highlight a new area of interest situated half way betwe en the former Chimo Mine and the gold
zone mentioned above. The results of these three (3) holes lie along the main gold -bearing structure
of the property.
Gold Structure 4B (refer Figures 1 and 2):
Results of drill holes CH16-02 (88.6 g/t Au / 1 .0 m) and CH16-01 confirm the potential of discovery in
an area that is poorly tested and yet has a significant historical intersection that graded up to 16.4 g/t
Au / 3.6 m.
Gold Structures 2 and 3 (refer to Figures 1 and 2):
Results of drill holes CH16-01 (17.7 g/t / 3.0 m) and CH16-02 (11.8 g/t Au / 2 .0 m) are in line with the
company’s exploration strategy and confirms the potential to increase the dimension of the numerous
known gold zones on the property by drilling the depth extension of the gold-bearing structures.
« The 8 gold-bearing intersections from these 6 drill holes, have met our objective to demonstrate the
potential for discovery of gold -bearing zones proximal to local mining infrastructure. » commented
Philippe Cloutier, President and CEO.
Quality Assurance / Quality Control
The scientific and/or technical information presented in this press release has been reviewed and
approved by Mr. Gaétan Lavallière, P. Geo., Ph. D. and Vice President for Cartier Resources. Mr.
Lavallière is a qualified person as defined by National Instrument 43-101.
All lengths presented in this press release are measured along the core axis. NQ core samples (co re
diameter 4.65 cm) are crushed to 85% minus 10 mesh then pulverized to 85% minus 200
mesh. Cartier inserts 10% of the samples in the form of certified standards and another 10% in the
form of blank samples to ensure quality control. The 50 grams of pul p were analysed at Accurassay
Laboratory, located in Rouyn -Noranda (Quebec). The analyses were carried out by fire assay and
atomic absorption. Results greater than 1.0 g/t Au are treated as follows : i) < 5.0 g/t Au, the pulp is
dissolved by fire assay and read by atomic absorption or ii) ≥ 5.0 g/t Au, the pulp is dissolved by fire
assay and the gold value is quantified by gravimetric analysis. For the samples with visible gold, 1000
grams of rock are directly analysed by ‘’Metallic Sieve’’ method.
-30-
For more information, please contact:
Philippe Cloutier, P.Geo.
President and CEO
Telephone: 819 856-0512
www.ressourcescartier.com
Investor Relations:
Relations Publiques Paradox
514 341-0408
Neither the TSX Venture Exchange nor its regulatory services provider accepts responsibility for the adequacy or accuracy of
this press release.