Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

DTWO.V ·

Dajin Announces High Grade Lithium Assay Results at Salinas Grandes Salar

Drill Results

Suite 450-789 West Pender Street Telephone: (604) 681-6151

Vancouver, BC V6C 1H2 Fax: (604) 689-7654

www.dajin.ca Email: [email protected]

PRESS RELEASE

DAJIN ANNOUNCES HIGH GRADE LITHIUM ASSAY

RESULTS AT SALINAS GRANDES SALAR

HIGHLIGHTS

High Lithium grades confirmed on Salinas Grandes salar

Peak assay returned 1,353 milligrams/liter Lithium

60% of assays >500 mg/l Lithium and 16% >800 mg/l Lithium

February 28 , 2018 - Vancouver, BC - Dajin Resources Corp. (“Dajin ”) (TSX-V: DJI) (OTCQB: DJIFF)

(Germany: C2U1) management is pleased to report that LSC Lithium Corporation (LSC) has completed phase

one surface exploration of the northwest portion of the San Jose/Navidad mina located on the Salinas Grandes

salar in the Province of Jujuy, Argentina. The mina forms part of a 93,000 hectare land package being earned

by LSC (51%) . To fulfill the terms of the earn -in agreement LSC must complete CDN$ 2,000,000 in

expenditures. LSC is the operator of the exploration project.

The 25 shallow brine samples cover an area of 550 hectares (5.5 km 2) in the northwestern corner of the 4,300

hectare (43 km 2) San Jose/Navidad mina. Concentrations range from 281 mg/l to 1,353 mg/l, averaging 591

mg/l Lithium. Click here to see Geochemical Map

Exploration Methodology

The 25 sample points were pre -planned on a 500m east/west and north/south grid, utilising the company

geographical information system and located in the field with a hand held GPS. At each sample site an auger

drill was used to excavate an 8 inch diameter hole to a depth of 2m. Thereafter a bailer was used to extract

brine 0.5m to 1.0m below the phreatic level after the brine had been given time to settle over a 30 minute period.

The bailed brine was then decanted into four sterilized plastic litre size bottles and sealed without any air being

trapped in the bottle. There after the samples were delivered to the laboratory for analyses.

Sampling and QA/QC

Brine sampling involved collection of brine from the sample pits by a bailer and decanted into a 20 -litre

container, which was flushed with fresh brine several times prior to collection of the sample. Brine was poured

into 1-litre sample bottles which had been previously flushed with fresh brine from the 20-litre container several

times. Sample bottles were filled to the top to eliminate the inclusion of air and sealed with a leak -proof lid.

Samples were labelled and labels covered with clear tape to prevent erasure of sample information. All samples

remained in the possession of the site geologist until delivery to Alex Stewart Laboratory (ASA) in Jujuy,

Argentina.

LSC has a well-developed QA/QC program. Brine assays are undertaken at ASA in Jujuy, Argentina. ASA is

independent of LSC and has significant experience in assaying lithium brines and is certified to ISO17025

standards. Brine assays are undertaken using ICP, gravimetric, potentiometric and volumetric methods as

detailed in a press release from LSC dated April 10, 2017. ASA runs internal duplicates at a rate of 1 in 20.

LSC inserts blanks and standards in sample batches at a rate of 1 in 20. Standards are internal standards

developed by LSC that have been independently certified by round robin tes ting. LSC uses distilled water as

blanks. The analytical results for standards, blanks, and replicate samples submitted as part of this project meet

established protocols for accuracy and precision.

Qualified Person/Data Verification

The scientific and technical information included in this press release has been approved by Donald H. Hains,

P.Geo. Mr. Hains is a qualified person, as defined in NI 43 -101 and is independent of LSC and Dajin. Mr.

Hains has verified all sampling, analyt ical and test data contained in this press release and review of certified

assay certificates against the assay data base.

About Dajin: (www.dajin.ca)

Dajin, is an early stage Lithium exploration company. Through its interest in Dajin Resources S.A. (“Dajin

S.A.”), it holds concessions or concession applications in Jujuy Province, Argentina that were acquired in

regions known to contain brines with Lithium, Potassium and Boron values. These land holdings exceed 93,000

hectares (230,000 acres) and are primarily located in the Salinas Grandes and Guayatayoc salt lake basins

(salars). San Jose/Navidad mina s form part of the 93,000 hectare land package cov ered by the joint venture

between LSC (51%) and Dajin (49%). LSC is the operator of the exploration project and is required to complete

CDN$2,000,000 in expenditures.

In Nevada, Dajin holds a 100% interest in 403 placer claims covering 7,914 acres (3,202 hectares) in the Teels

Marsh valley of Mineral County, Nevada. These claims are known to contain Lithium and Boron values and

are adjacent to the birth place of US Borax Corp’s first borax mine. Dajin also holds a 100% interest in 278

placer claims cov ering 5,591 acres (2,262 hectares) in the Alkali Lake valley of Esmeralda County, Nevada,

located 7.5 miles (1 2 kilometers) northeast of Albemarle’s Silver Peak Lithium brine operation in Clayton

Valley. Dajin is moving forward with construction of roads and pads at its Teels Marsh valley project in

preparation for drilling of four (4) large diameter exploration wells.

ON BEHALF OF DAJIN’S BOARD OF DIRECTORS

Brian Findlay For further information please contact:

President & CEO Julie Hajduk at 604-609-6151 or [email protected]

Head of Corporate Development

The TSX Venture Exchange has not reviewed and does not accept responsibility for the adequacy or accuracy of this release.