DSV.TO · 2022-05-13 12:00:00

Discovery Intercepts 337 g/t AgEq over 34 m and 606 g/t AgEq over 18 m Below the PEA Open Pit at Cordero

Drill Results Economic Studies

Discovery Intercepts 337 g/t AgEq over 34 m and 606 g/t AgEq over

18 m Below the PEA Open Pit at Cordero

May 13, 2022, Toronto, Ontario - Discovery Silver Corp. (TSX-V: DSV, OTCQX: DSVSF)

(“Discovery” or the “Company”) is pleased to announce results from 19 holes from its Phase 2

drill program on its flagship Cordero silver p roject (“Cordero” or “the Project”) located in

Chihuahua State, Mexico. The current set of results includes resource upgrade drilling for the

Pre-Feasibility Study (“PFS”), planned for the fourth quarter of this year, and expansion drilling

of the PEA open pit and the resource pit.

Highlight intercepts include:

• C21-560 intercepted a high-grade interval immediately below the current Preliminary

Economic Assessment (“P EA”) pit that returned 18.1 m averaging 606 g/t AgEq1 from

230.0 m (234 g/t Ag, 0.15 g/t Au, 3.8% Pb and 6.5% Zn);

• C21-564 intercepted 33.9 m averaging 337 g/t AgEq1 from 622.1 m (95 g/t Ag, 0.21 g/t

Au, 1.9% Pb and 4.5% Zn) approximately 70 m below the PEA pit;

• C21-544 intercepted 60.4 m averaging 122 g/t AgEq1 from 115.7 m (45 g/t Ag, 0.07 g/t

Au, 0.9% Pb and 1.2% Zn) approximately 50 m below the PEA pit;

• C21-574 intercepted 13.4 m averaging 483 g/t AgEq1 from 3.3 m (272 g/t Ag, 0.16 g/t

Au, 4.1% Pb and 1.9% Zn) in a step-out hole approximately 100 m to the northeast of the

resource pit.

Taj Singh, President and CEO, states: “We continue to intercept excellent grades both within

and on the margins outside of the open pit defined in our 2021 PEA. This will further increase

the confidence in the resource supporting our upcoming PFS and underscores the potential to

expand the PFS open pit. In addition, our resource expansion drilling in the far northeast

continues to highlight the prospectivity of this part of the deposit. Broad-spaced drilling to date

has identified multiple sub-parallel mineralized corridors in this area that have the potential to

expand the resource along strike and at depth.”

DRILL RESULTS:

This current set of Phase 2 drill holes was focused on two main areas: 1) upgrade and

expansion drilling of the PEA open pit; and 2) resource expansion in the far northeast of the

NEWS RELEASE

deposit. Results will be incorporated in a resource update and PFS scheduled for completion

in the fourth quarter of this year.

Detailed drill highlights from the holes in this release are provided in the table s below.

Supporting maps and sections, drill hole locations and full assay results can be found at the

following link:

https://discoverysilver.com/site/assets/files/5187/20220513_sections_assays.pdf

A PDF of this release with supporting maps and sections included as appendices can be

found at the following link:

https://discoverysilver.com/site/assets/files/5187/20220513_pr_w_sections_final.pdf

PEA Open Pit Upgrade & Expansion Drilling

Drilling in and around the open pit outlined in the 2021 PEA continues to intercept excellent

grades over broad widths. This drilling is expected to improve the confidence of the resource

that will support the PFS mine plan.

A number of intercepts outside the PEA open pit also demonstrate the potential to increase

the size of the open pit in the PFS. C21-560 intercepted a series of sulphide veins and intrusive

breccias that returned 18.1 m of 606 g/t AgEq 1 from 230.0 m. This intercept was directly

beneath the PEA open pit in an area previously modelled as medium grade. C21 -564, drilled

to upgrade the resource at depth in the South Corridor returned multiple mineralized intercepts

including 33.9 m of 337 g/t AgEq1 approximately 70 m below the bottom of the PEA pit. C21-

544 intercepted a broad zone of intrusive breccias that returned 60.4 m of 1 22 g/t AgEq1 from

115.7 m. This zone was approximately 50 m below the PEA pit in an area previously modelled

as waste.

Detailed drill highlights from the PEA open pit upgrade and expansion drilling are provided in

the table below:

Hole ID From

(m)

Width

(m)

(g/t)

(%)

AgEq1

(g/t)

C21-532 98.1 158.6 60.6 22 0.03 0.4 0.5 55

and 206.8 245.3 38.6 69 0.10 1.5 1.0 159

C21-540 96.0 136.6 40.6 27 0.07 0.3 0.4 58

and 155.7 175.3 19.6 48 0.43 0.9 1.1 145

C21-541 210.4 251.8 41.5 39 0.04 0.1 0.3 57

and 494.5 553.2 58.8 30 0.07 0.5 1.4 103

including 495.3 522.2 27.0 45 0.14 0.7 1.9 148

C21-544 115.7 176.1 60.4 45 0.07 0.9 1.2 122

and 295.6 322.7 27.1 23 0.04 0.5 1.0 77

C21-550 267.8 313.6 45.9 44 0.06 1.1 1.1 123

and 348.2 369.7 21.6 47 0.07 1.0 1.8 155

Resource Expansion Drilling

Resource expansion drilling remains focused in the northeast of the deposit in both the North

and South Corridors. The drilling in this area is wide-spaced (drill spacing ranges from

approximately 50 m – 250 m) and is targeting the expansion of the resource along strike to the

northeast and at depth. The need for additional infill drilling in this area will be evaluated once

the resource model has been updated in 4Q 2022 with this new drill data.

In the South Corridor, drilling confirmed the potential extension of feeder structures supporting

the Josefina Vein trend by 250 m to the northeast. C21-574, a 150 m step-out hole, intercepted

13.4 m of 483 g/t AgEq1 from 3.3 m and 27.5 m of 122 g/t AgEq1 from 411.1 m. C21-579, drilled

100 m further northeast of C21-574, intercepted a number of sulphide veins including one vein

at depth that returned 2.8 m of 486 g/t AgEq1 from 430.4 m.

In the North Corridor, drilling encountered a number of broad mineralized zones beneath the

resource pit. Highlight intercepts from these zones include 34.0 m of 143 g/t AgEq1 from 350.8

m (C21-578), 29.1 m of 109 g/t AgEq 1 from 635.3 (C21-577), 20.7 m of 104 g/t AgEq1 from

383.9 m (C21-584) and 21.8 m of 126 g/t AgEq1 from 416.0 m (C21-584).

Detailed drill highlights from the resource expansion drilling are provided in the table below:

Hole ID From

(m)

Width

(m)

(g/t)

(%)

AgEq1

(g/t) Area

C21-574 3.3 16.7 13.4 272 0.16 4.1 1.9 483

NE – South

Corridor and 91.3 103.6 12.3 38 0.08 0.6 2.2 146

and 411.1 438.6 27.5 46 0.07 0.3 1.6 122

C21-577 247.0 258.9 12.0 45 0.12 0.5 1.4 123

NE – North

Corridor

and 348.7 357.8 9.1 44 0.05 0.3 3.5 186

and 490.4 541.2 50.9 26 0.05 0.3 1.3 86

and 635.3 664.4 29.1 16 0.02 0.1 2.4 109

C21-578 151.9 177.7 25.8 22 0.05 0.3 0.5 53 NE – North

Corridor and 350.8 384.8 34.0 54 0.10 0.4 1.8 143

C21-579 430.4 433.2 2.8 217 0.04 4.2 3.6 486 NE – South

Corridor

Hole ID From

(m)

Width

(m)

(g/t)

(%)

AgEq1

(g/t)

C21-560 230.0 248.1 18.1 234 0.15 3.8 6.5 606

C21-564 258.2 309.3 51.2 28 0.16 0.3 1.0 85

and 449.6 460.8 11.2 91 0.12 1.8 3.0 266

and 492.1 572.2 80.2 29 0.06 0.4 0.8 75

and 622.1 656.0 33.9 95 0.21 1.9 4.5 337

Hole ID From

(m)

Width

(m)

(g/t)

(%)

AgEq1

(g/t) Area

C21-580 111.8 129.3 17.5 53 0.07 0.9 1.4 137 NE – North

Corridor and 144.0 179.5 35.5 34 0.10 0.4 0.6 75

C21-581 185.5 210.4 24.9 16 0.01 0.2 1.9 94 NE – North

Corridor and 520.5 534.2 13.7 16 0.03 0.0 4.0 166

C21-584 136.5 138.6 2.1 358 0.23 6.3 6.4 810

NE – North

Corridor

and 244.4 252.4 7.9 120 0.36 2.5 4.0 370

and 383.9 404.6 20.7 29 0.02 0.2 1.8 104

and 416.0 437.8 21.8 31 0.04 0.2 2.3 126

1All results in this news release are rounded. Assays are uncut and undiluted. Widths are drilled widths, not true widths, as a full

interpretation of the actual orientation of mineralization is not complete. As a guideline, intervals with disseminated mineralization

were chosen based on a 25 g/t AgEq cutoff with no more than 10 m of dilution. AgEq calculations are used as the basis for total

metal content calculations given Ag is the dominant metal constituent as a percentage of AgEq value in approximately 70% of the

Company’s mineralized intercepts. AgEq calculations for reported drill results are based on USD $22.00/oz Ag, $1,600/oz Au,

$1.00/lb Pb, $1.20/lb Zn. The calculations assume 100% metallurgical recovery and are indicative of gros s in-situ metal value at

the indicated metal prices. Refer to Technical Notes below for metallurgical recoveries assumed in the 2021 PEA completed on

Cordero.

DRILL PROGRAM UPDATE:

The Company has now completed 71,000 m (211 holes) as part of its Phase 2 drill program

(excluding drill metres used to support the 2021 Mineral Resource Estimate). Phase 2 drilling

will continue through the remainder of the year and will be focused on three key areas: (1) PFS

drilling consisting of reserve definition and engineering drilling; (2) resource expansion in the

northeast of the deposit and at depth; and (3) initial drill testing of five property-wide targets on

the Company’s extensive land package.

About Discovery

Discovery’s flagship project is its 100%-owned Cordero project, one of the world’s largest silver

deposits. The PEA completed in November 2021 demonstrates that Cordero has the potential

to be developed into a highly capital efficient mine that offers the combination of margin, size

and scaleability. Cordero is located close to infrastructure in a prolific mining belt in Chihuahua

State, Mexico. Continued exploration and project development at Cordero is supported by a

strong balance sheet with cash of approximately C$60 million.

On Behalf of the Board of Directors,

Taj Singh, M.Eng, P.Eng, CPA

President, Chief Executive Officer and Director

For further information contact:

Forbes Gemmell, CFA

VP Corporate Development

Phone: 416-613-9410

Email: [email protected]

Website: www.discoverysilver.com

Sample analysis and QA/QC Program

The true width of the veins is estimated to be approximately 70% of the drilled width. Assays

are uncut except where indicated. All core assays are fro m HQ drill core unless stated

otherwise. Drill core is logged and sampled in a secure core storage facility located at the

project site 40km north of the city of Parral. Core samples from the program are cut in half,

using a diamond cutting saw, and are sent to ALS Geochemistry -Mexico for preparation in

Chihuahua City, Mexico, and subsequently pulps are sent to ALS Vancouver, Canada, which

is an accredited mineral analysis laboratory, for analysis. All samples are prepared using a

method whereby the entire sample is crushed to 70% passing -2mm, a split of 250g is taken

and pulverized to better than 85% passing 75 microns. Samples are analyzed for gold using

standard Fire Assay-AAS techniques (Au-AA24) from a 50g pulp. Over limits are analyzed

by fire assay and gravimetric finish. Samples are also analyzed using thirty three-element

inductively coupled plasma method (“ME -ICP61”). Over limit sample values are re-assayed

for: (1) values of zinc > 1%; (2) values of lead > 1%; and (3) values of silver > 100 g/t. Samples

are re-assayed using the ME -OG62 (high-grade material ICP -AES) analytical package. For

values of silver greater than 1,500 g/t, samples are re- assayed using the Ag-CON01

analytical method, a standard 30 g fire assay with gravimetric finish. Certifi ed standards and

blanks are routinely inserted into all sample shipments to ensure integrity of the assay

process. Selected samples are chosen for duplicate assay from the coarse reject and pulps

of the original sample. No QAQC issues were noted with the results reported herein.

Qualified Person

Gernot Wober, P.Geo, VP Exploration, Discovery Silver Corp., is the Company's designated

Qualified Person for this news release within the meaning of National Instrument 43- 101

Standards of Disclosure for Mineral Projects (“NI 43-101”) and has reviewed and validated that

the information contained in this news release is accurate.

TECHNICAL NOTES & FORWARD-LOOKING STATEMENTS:

The most recent technical report for the Cordero Project is the 2021 Preliminary Economic

Assessment (PEA). The PEA was completed by Ausenco Engineering Canada Inc. with

support from AGP Mining Consultants Inc. and Knight Piésold and Co. (USA). The full technical

report supporting the PEA is available on Discovery’s website and on SEDAR under Discovery

Silver Corp.

The PEA assumed average life-of-mine recovery assumptions for sulphide material of 84% for

Ag, 19% for Au, 86% for Pb and 85% for Zn. The PEA assumed oxide recovery assumptions

of 56% for Ag and 63% for Au for crushed feed and 36% for Ag and 35% for Au for uncrushed

ROM feed.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture

Exchange) accepts responsibility for the adequacy or accuracy of this release.

This news release is not for distribution to United States newswire services or for dissemination in the United States.

This news release does not constitute an offer to sell or a solicitation of an offer to buy nor shall there be any sale of any of the

securities in any jurisdiction in which such offer, solicitation or sale would be unlawful, including any of the securities in the United

States of America. The securities have not been and will not be registered under the United States Securities Act of 1933, as

amended (the “1933 Act”) or any state securities laws and may not be offered or sold within the United States or to, or for account

or benefit of, U.S. Persons (as defined in Regulation S under the 1933 Act) unless registered under the 1933 Act and applicable

state securities laws, or an exemption from such registration requirements is available.

Cautionary Note Regarding Forward-Looking Statements

This news release may include forward- looking statements that are subject to inherent risks and uncertainties. All statements

within this news release, other than statements of historical fact, are to be considered forward looking statements. Forward-looking

statements including, but not limited to Discovery’s future plans and objectives regarding the Cordero Project and the prospect of

further discoveries there, which constitute forward looking information that involve various risks and uncertainties . Although

Discovery believes the expectations expressed in such forward- looking statements are based on reasonable assumptions, such

statements are not guarantees of future performance and actual results or developments may differ materially from those

described in forward- looking statements. Factors that could cause actual results to differ materially from those described in

forward-looking statements include fluctuations in market prices, including metal prices, continued availability of capital and

financing, and general economic, market or business conditions. There can be no assurances that such statements will prove

accurate and, therefore, readers are advised to rely on their own evaluation of such uncertainties. Discovery does not assume

any obligation to update any forward-looking statements except as required under applicable laws.

← Back to feed