Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

DSV.TO ·

Discovery Intercepts 197 g/t AgEq over 41 m in Feasibility Study Drilling at Cordero

Drill Results Economic Studies

Discovery Intercepts 197 g/t AgEq over 41 m in Feasibility Study

Drilling at Cordero

May 24, 2023, Toronto, Ontario - Discovery Silver Corp. (TSX: DSV, OTCQX: DSVS F)

(“Discovery” or the “Company”) is pleased to announce results from Feasibility Study drill holes

on its flagship Cordero silver project (“Cordero” or “the Project”) located in Chihuahua State,

Mexico. These holes consist of reserve expansion drilling and will be incorporated in a

Feasibility Study in conjunction with a resource update planned for the first half of 2024.

Highlight intercepts from this current set of drill holes include:

• 41 m averaging 197 g/t AgEq1 (63 g/t Ag, 0.09 g/t Au, 1.2% Pb and 2.7% Zn) from 386

m and 8 m averaging 416 g/t AgEq1 (195 g/t Ag, 0.23 g/t Au, 2.2% Pb and 4.1% Zn) from

79 m in the core of the South Corridor in hole C22-688.

• 37 m averaging 139 g/t AgEq1 (58 g/t Ag, 0.05 g/t Au, 0.8% Pb and 1.5% Zn) from 236

m and 104 m averaging 86 g/t AgEq1 (37 g/t Ag, 0.04 g/t Au, 0.3% Pb and 1.1% Zn) from

91 m in hole C22-705; these intervals were in the southern portion of the South Corridor

within the reserves pit.

• 51 m averaging 105 g/t AgEq1 (51 g/t Ag, 0.06 g/t Au, 0.7% Pb and 0.9% Zn) from 63 m

in hole C22-697 in the southern portion of the South Corridor.

Tony Makuch , CEO, states: “ Our Feasibility Study drilling continues to demonstrate the

potential to grow reserves at Cordero whilst building further confidence in the underlying

resource model. This drill program is nearing completion upon which drilling will then focus on

testing multiple highly prospective targets identified by our extensive field programs that have

been ongoing since 2021.

“Meanwhile, we continue to make excellent progress on our environmental impact assessment

(‘Manifesto de Impacto Ambiental’ or ‘MIA’) which we plan to submit to the Mexican Federal

Environmental Department (SEMARNAT) later this quarter. The MIA is one of the principal

permits required for the development of Cordero. We have completed an initial review of the

new mining law in Mexico and while we are awaiting further clarification on certain

amendments, we do not expect the new mining law will have a material impact on the Project

timeline. It is our intention to adhere to all Mexican regulatory requirements alongside our

overarching corporate objective of delivering the highest industry standards for environmental

protection, social responsibility and health and safety.”

NEWS RELEASE

DRILL RESULTS:

This current set of Feasibility Study drilling consists of 23 drill holes and was focused on two

key areas: 1) reserve upgrade and expansion drilling in the South Corridor and 2) reserve

expansion drilling on the margins of the Pozo de Plata zone in the North Corridor. Supporting

maps and sections , drill hole locations and full assay results can be found here: Plan map,

sections & assays. A PDF of this release with supporting maps and sections included as

appendices can be found here: Press release with plan map & section.

Drilling in the South Corridor continues to demonstrate the potential to improve grade and

convert waste to ore within the reserves pit. C22 -705 returned 36.7 m of 139 g/t AgEq 1 from

236.3 m toward the bottom of the reserves pit in an area previously modelled as low grade and

waste. This hole also intercepted 103.6 m of 86 g/t AgEq1 from 91.2 m improving the

confidence of a broad higher -grade zone near surface. On this same section, hole C22 -688

returned 40.6 m of 197 g/t AgEq1 from 386.4 m and 37.5 m of 78 g/t AgEq from 282.1 m. Both

intercepts have the potential to expand the volume of higher-grade blocks modelled toward the

bottom of the reserves pit. C22- 698 intercepted 78.3 m of 97 g/t AgEq 1 from 103.5 m,

potentially extending the depth of higher-grade blocks within the reserves pit.

Drilling in the North Corridor consisted of shallow holes targeting the expansion of reserves on

the northwest margins of the Pozo de Plata zone. Drilling confirmed that the tenor of

mineralization at Pozo de Plata diminishes to the northwest, consistent w ith the underlying

block model estimation in this area.

Detailed drill highlights from this set of F easibility Study drill holes are provided in the table

below:

Hole ID From

(m)

To

(m)

Width

(m)

Ag

(g/t)

Au

(g/t)

Pb

(%)

Zn

(%)

AgEq1

(g/t)

C22-688 78.7 86.5 7.8 195 0.23 2.2 4.1 416

and 282.1 319.6 37.5 49 0.06 0.6 0.3 78

and 386.4 427.0 40.6 63 0.09 1.2 2.7 197

C22-689 15.0 35.7 20.7 55 0.05 0.6 0.2 81

and 103.6 163.0 59.5 35 0.07 0.3 1.4 97

C22-691 39.8 79.8 40.1 10 0.02 0.1 1.6 73

and 115.2 129.7 14.5 27 0.09 0.4 1.5 94

and 404.3 428.3 24.0 58 0.12 0.7 2.6 176

C22-694 182.8 218.1 35.4 52 0.07 0.7 1.7 136

C22-695 23.7 94.3 70.6 35 0.03 0.3 0.9 78

and 116.5 130.8 14.4 200 0.12 1.5 3.1 360

C22-696 22.9 44.0 21.1 93 0.05 1.0 0.2 132

and 75.5 93.3 17.8 130 0.09 1.0 2.3 246

C22-697 63.1 114.5 51.4 51 0.06 0.7 0.9 105

1All results in this news release are rounded. Assays are uncut and undiluted. Widths are drilled widths, not true widths, as a full

interpretation of the actual orientation of mineralization is not complete. As a guideline, intervals with disseminated mineralization

were chosen based on a 25 g/t AgEq cutoff with no more than 10 m of dilution . AgEq calculations are used as the basis for

reporting metal content calculations given Ag is the dominant metal constituent as a percentage of AgEq value in approximat ely

70% of the Company’s mineralized intercepts. AgEq is calculated as Ag(g/t) + 18.39 x Au(g/t) + 30.81 x Pb(%) + 36.54(%). This

calculation is based on metal prices of USD $ 22.00/oz Ag, $1, 600/oz Au, $1.00 /lb Pb, $1. 20/lb Zn and life-of-mine average

recovery assumptions from the 2023 Pre-Feasibility Study of 87% for Ag, 22% for Au, 86% for Pb and 85% for Zn.

DRILL PROGRAM UPDATE:

The Company has now completed 49,700 m (156 holes) as part of its Feasibility Study drill

program (since the data cut-off for the PFS study). Feasibility study drilling consists of resource

upgrade drilling, drilling targeting the expansion of the PFS open pit , engineering drilling and

condemnation drilling.

Condemnation drilling is expected to wrap up in June upon which the property -wide drill

program will commence. This program will initially target large chargeability anomalies in the

Sanson area (approximately 3.5 km to the northeast of Cordero) and resource expansion

targets to the northeast of the deposit. Currently, 9,000m of drilling is planned for property wide

drilling in 2023. This program may be expanded depending on the results of the initial drilling.

About Discovery

Discovery’s flagship project is its 100%-owned Cordero project, one of the world’s largest silver

deposits. The PFS published in February 2023 demonstrates that Cordero has the potential to

be developed into a highly capital -efficient mine that offers the combination of margin, size,

and scalability. Cordero is located close to infrastructure in a prolific mining belt in Chihuahua

State, Mexico.

On Behalf of the Board of Directors,

Tony Makuch, P.Eng

CEO & Director

Hole ID From

(m)

To

(m)

Width

(m)

Ag

(g/t)

Au

(g/t)

Pb

(%)

Zn

(%)

AgEq1

(g/t)

C22-698 103.5 181.8 78.3 32 0.05 0.4 1.4 97

C22-701 114.1 178.5 64.4 27 0.07 0.2 1.2 77

and 188.2 207.2 19.0 27 0.02 0.2 2.0 107

C22-705 22.3 74.7 52.4 35 0.06 0.3 0.4 59

and 91.2 194.8 103.6 37 0.04 0.3 1.1 86

and 236.3 273.0 36.7 58 0.05 0.8 1.5 139

For further information contact:

Forbes Gemmell, CFA

VP Corporate Development

Phone: 416-613-9410

Email: [email protected]

Website: www.discoverysilver.com

Sample analysis and QA/QC Program

Assays are uncut except where indicated. All core assays are from HQ drill core unless stated

otherwise. Drill core is logged and sampled in a secure core storage facility located at the

project site 40km north of the city of Parral. Core samples from the program are cut in half,

using a diamond cutting saw, and are sent to ALS Geochemistry -Mexico for preparation in

Chihuahua City, Mexico, and subsequently pulps are sent to ALS Vancouver, Canada, which

is an accredited mineral analysis laboratory, for analysis. All samples are prepared using a

method whereby the entire sample is crushed to 70% passing -2mm, a split of 250g is taken

and pulverized to better than 85% passing 75 microns. Samples are analyzed for gold using

standard Fire Assay-AAS techniques (Au-AA24) from a 50g pulp. Over limits are analyzed

by fire assay and gravimetric finish. Samples are also analyzed using 33 element inductively

coupled plasma method (“ME -ICP61”). Over limit sample values ar e re- assayed for: (1)

values of zinc > 1%; (2) values of lead > 1%; and (3) values of silver > 100 g/t. Samples are

re-assayed using the ME -OG62 (high- grade material ICP -AES) analytical package. For

values of silver greater than 1,500 g/t, samples are re -assayed using the Ag- CON01

analytical method, a standard 30 g fire assay with gravimetric finish. Certified standards and

blanks are routinely inserted into all sample shipments to ensure integrity of the assay

process. Selected samples are chosen for duplicate assay from the coarse reject and pulps

of the original sample. No QAQC issues were noted with the results reported herein.

Qualified Person

Gernot Wober, P.Geo, VP Exploration, Discovery Silver Corp., is the Company's designated

Qualified Person for this news release within the meaning of National Instrument 43- 101

Standards of Disclosure for Mineral Projects (“NI 43-101”) and has reviewed and validated that

the information contained in this news release is accurate.

The most recent technical report for the Cordero Project is the 2023 Preliminary Feasibility

Study for the Company’s Cordero project. The report was completed by Ausenco with support

from AGP Mining Consultants Inc. , Knight Piésold Ltd. and Hard Rock Consulting and is

available on Discovery’s website and on SEDAR under Discovery Silver Corp.

FORWARD-LOOKING STATEMENTS:

Neither TSX Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Exchange) accepts

responsibility for the adequacy or accuracy of this release.

This news release is not for distribution to United States newswire services or for dissemination in the United States.

This news release does not constitute an offer to sell or a solicitation of an offer to buy nor shall there be any sale of any of the

securities in any jurisdiction in which such offer, solicitation or sale would be unlawful, including any of the securities in the United

States of America. The securities have not been and will not be registered under the United States Securities Act of 1933, as

amended (the “1933 Act”) or any state securities laws and may not be offered or sold within the United States or to, or for account

or benefit of, U.S. Persons (as defined in Regulation S under the 1933 Act) unless registered under the 1933 Act and applicable

state securities laws, or an exemption from such registration requirements is available.

Cautionary Note Regarding Forward-Looking Statements

This news release may include forward- looking statements that are subject to inherent risks and uncertainties. All statements

within this news release, other than statements of historical fact, are to be considered forward looking. Although Discovery believes

the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not

guarantees of future performance and actual results or developments may differ materially from those described in forward-looking

statements. Statements regarding the results of the pre-feasibility study and the anticipated capital and operating costs, sustaining

costs, net present value, internal rate of return, payback period, process capacity, average annual metal production, average

process recoveries, concession renewal, permitting of the Project, anticipated mining and processing methods, proposed pre-

feasibility study production schedule and metal production profile, anticipated construction period, anticipated mine life, expected

recoveries and grades, anticipated production rates, infrastructure, social and environmental impact studies, availability of labour,

tax rates and commodity prices that would support development of the Project. Information concerning mineral resource/reserve

estimates and the economic analysis thereof contained in the results of the pre- feasibility study are also forward- looking

statements in that they reflect a prediction of the mineralization that would be encountered, and the results of mining, if a mineral

deposit were developed and mined. Forward-looking statements are statements that are not historical facts which address events,

results, outcomes or developments that the Company expects to occur. Forward- looking statements are based on the beliefs,

estimates and opinions of the Company’s management on the date the statements are made and they involve a number of risks

and uncertainties. Factors that could cause actual results to differ materially from those described in forward-looking statements

include fluctuations in market prices, including metal prices, continued availability of capital and financing, and general economic,

market or business conditions. There can be no assurances that such statements will prove accurate and, therefore, readers are

advised to rely on their own evaluation of such uncertainties. Discovery does not assume any obligation to update any forward-

looking statements except as required under applicable laws. The risks and uncertainties that may affect forward- looking

statements, or the material factors or assumptions used to develop such forward- looking information, are described under the

heading "Risks Factors" in the Company’s Annual Information Form dated March 29, 2023 , which is available under the

Company’s issuer profile on SEDAR at www.sedar.com.