STAR - Orion South Diamond Project Five Trench Cutter Holes Complete to Date: Bulk Sampling Statistics
1
NEWS RELEASE August 07, 2019
Stock Symbol: DIAM: TSX Saskatoon, Saskatchewan
STAR - ORION SOUTH DIAMOND PROJECT
FIVE TRENCH CUTTER HOLES COMPLETE TO DATE: BULK SAMPLING STATISTICS
George H. Read, P. Geo., Senior Vice President Exploration and Development of Star Diamond Corporation (“Star
Diamond” or the “Corporation”) is pleased to announce that Rio Tinto Exploration C anada (”RTEC”) have
completed the drilling of five of the ten proposed bulk sample hole s (trenches) on the Corporation’s Star
Kimberlite, using the Trench Cutter Sampling Rig. The Star Kimberlite is located within the Corporation’s Star -
Orion South Diamond Project, in the Fort à la Corne diamond district of central Saskatchewan, Canada, on mineral
dispositions held 100 percent by Star Diamond. RTEC refers to Star Diamond’s mineral dispositions in the Fort à la
Corne diamond district as Project FalCon.
The drilling and sampling statistics for each of these five trenches on the Star kimberlite are listed in the table
below:
Trench # Days per
Trench
Average
Production (m/day)
Total
Depth (m)
Samples
Collected
Bags
Collected1
19FALCT001 16 14.3 228.4 15 703
19FALCT004 14 16.7 233.8 15 771
19FALCT003 13 19.2 249.3 15 873
19FALCT007 10 22.5 225.1 14 613
19FALCT006 10 24.1 241.5 15 704
1. Note Kimberlite Sample Weights are not available as these have not yet been acquired by RTEC
The Trench Cutter Sampling Rig consists of a Bauer BC 50 Cutter mounted on a Bauer MC 128 Duty -cycle Crane.
The redesigned Kimberlite Separation Unit (“KSU”) and accompanying desanding unit ha ve also been fully
commissioned. Kimberlite collected will be stored in a secure storage area, until the on -site Bulk S ample Plant
(“BSP”) has been assembled and commissioned . Final diamond recovery will then be conducted by RTEC at a
secure off- site facility. The depth of each trench is determined by kimberlite thickness. Trench 19FALCT003
confirms that the Trench Sampling Rig can reach its designed sampling depth of 250 metres below surface.
Senior Vice President Exploration and Development, George Read, states: “ These drilling and sampling statistics
confirm that the Trench Cutter bulk sampling program on the Star Kimberlite has made good progress and shows
that the completion of all ten trenches is achievable within the 2019 sampling season. The rate of sampling with
the Trench Cutter rig also appears to have continued to improve through out the drilling of these first five
trenches. The aim of RTEC’s bulk sampling program is to recover samples of the highest quality , to help ensure
that diamond breakage is minimized. The successful use of this new Trench Cutter Sampling Rig technology for the
recovery of kimberlite bulk samples also has the ability to revolutionize future bulk sampling and mining of
kimberlites, particularly for kimberlites characteristic of the Fort à la Corne diamond district of central
Saskatchewan, Canada.”
Star Diamond Corporation is a Canadian based corporation engaged in the acquisition, exploration and
development of mineral propertie s. Shares of the Corporation trade on the TSX Exchange under the trading
2
symbol “DIAM”. The Corporation’s Fort à la Corne kimberlites (including the Star - Orion South Diamond Project ,
or “Project”) are located in central Saskatchewan in close proximity to established infrastructure, including paved
highways and the electrical power grid, which provide significant advantages for future mine development.
All technical information in this press release has been prepared under the supervision of George Read, Senior
Vice-President of Exploration and Development, a registered Professional Geoscientist in the Provinces of
Saskatchewan and British Columbia and Mark Shimell, Project Manager, a registered Professional Geoscientist in
the Province of Saskatchewan, who are the Corporation’s “Qualified Persons” under the definition of NI 43-101.
Caution Regarding Forward-Looking Statements
This news release contains forward -looking statements as defined by certain securities laws, including the "safe harbour" provisions of
Canadian securities legislation and the United States Private Securities Litigation Reform Act of 1995. Forward -looking information is often,
but not always, identified by the use of words such as "anticipate", "believe", "expect", "plan", "intend", "forecast", "targ et", "project",
"guidance", "may", "will", "should", "could", "estimate", "predict " or similar words suggesti ng future outcomes or language suggesting an
outlook. In particular, statements regarding the Corporation's future operations, future exploration and development activities or oth er
development plans constitute forward- looking statements. B y their nature, statements referring to mineral reserves, mineral resources,
PEA or TFFE constitute forward -looking statements. Forward-looking statements contained or implied in this press release include, but are
not limited to, RTEC’s and the Corporation’s objectives for the ensuing year, including the proposed bulk sampling program.
These forward-looking statements are based on the Corporation's current beliefs as well as assumptions made by and information currently
available to it and involve inherent risks and uncertainties, both general and specific.
Risks exist that forward -looking statements will not be achieved due to a number of factors including, but not limited to, developments in
world diamond markets, changes in diamond prices, risks relating to fluctuations in the Canadian dollar and other currencies relative to the
US dollar, changes in exploration, development or mining plans due to exploration results and changing budget priorities of the Corporation
or its partners, the effects of competition in th e markets in which the Corporation operates, the impact of changes in the laws and
regulations regulating mining exploration, development, closure, judicial or regulatory judgments and legal proceedings, oper ational and
infrastructure risks and the additional risks described in the Corporation's most recently filed Annual Information Form, annual and interim
MD&A. The Corporation's anticipation of and success in managing the foregoing risks could cause actual results to differ mate rially from
what is anticipated in such forward-looking statements.
Although management considers the assumptions contained in forward- looking statements to be reasonable based on information
currently available to it, those assumptions may prove to be incorrect. When making decis ions with respect to the Corporation, investors
and others should not place undue reliance on these statements and should carefully consider the foregoing factors and other
uncertainties and potential events. Unless required by applicable securities law, t he Corporation does not undertake to update any
forward-looking statement that is made herein.
For further information: [email protected] or (306) 664-2202
www.stardiamondcorp.com
- END -