STAR - ORION SOUTH DIAMOND PROJECT TECHNICAL UPDATE: BULK SAMPLE PLANT DESIGNED AND ORDERED George H. Read, P. Geo., Senior Vice President Exploration and Development of Star Diamond Corporation (“Star Diamond” or the “Corporation”) is pleased to announce that Rio Tinto Exploration Canada (”RTEC”),
1
NEWS RELEASE May 15, 2018
TSX: DIAM Saskatoon, Saskatchewan
STAR - ORION SOUTH DIAMOND PROJECT
TECHNICAL UPDATE: BULK SAMPLE PLANT DESIGNED AND ORDERED
George H. Read, P. Geo., Senior Vice President Exploration and Development of Star Diamond Corporation
(“Star Diamond” or the “Corporation”) is pleased to announce that Rio Tinto Exploration Canada (”RTEC”),
and Consulmet (Pty) Ltd (“Consulmet”) have finalized contractual arrangements for the manufacture and
supply of a 30 tonne per hour ( “tph”) bulk sample plant. This bulk sample plant will be used to process the
kimberlite recovered by the next phase of large diameter, bulk sample drilling on the Star - Orion South
Diamond Project (“Project”). The bulk sample plant will be fabricated by Consulmet in South Africa in
modular, containerized units, which will facilitate shipment to the Project site in central Saskatchewan.
Consulmet is a specialised technology company serving the minerals industry through the design and supply
of production ready mineral processing plants.
Bulk Sample Plant
The proposed bulk sample plant will use a modern flowsheet and the latest X-ray transmission (“XRT”)
sorting technology to ensure any large diamonds present (up to 25 millimetres) are recovered with minimal
breakage. A secondary crushing circuit , using a high pressure rolls crusher (“HPRC”) , will maximize the
liberation of smaller diamonds from the kimberlite. The bulk sample plant consists of four areas, each with
its own control system: 1) a wet front -end and feed preparation area; 2) an XRT sorter area; 3) a 10 tph
dense media separator (“DMS”) area; and 4) a water reticulation area.
Washed Run of Mine (“ROM”) kimberlite ( -80 millimetres), collected in bulk bags , from Bauer Maschinen
GmbH (“Bauer”) BE550 desanding equipment at the drill site, will be supplied to the front -end of the plant.
Initial scrubbing and screening sends coarse - 80+25 millimetre kimberlite to the jaw crusher, and removes
all -0.85 millmetre fines using a slotted screen. Thereafter, - 25+12 and -12+6 millmetre kimberlite fractions
are processed through the XRT sorter in two simultaneous feeds. The XRT sorter accepts are stored in a
secure bin for subsequent diamond recovery. The -25+6 millimetre XRT sorter rejects are sent to a
secondary HPRC and the crushed product is returned to the primary feed. The -6+0.85 millimetre kimberlite
fraction is processed through the DMS cyclone to prepare a diamond -bearing heavy mineral concentrate .
Final diamond recovery is to be conducted at a secure off-site facility. Plant process water is recovered from
various de -watering screens within the plant and the fines thickener , and returned to a recycled water
storage facility. Fresh and recycled water are used in the primary plant feed. The underflow from the
thickener (-0.85 millimetre) is sent as residue to an on-site fines management area (“FMA”).
Senior Vice President Exploration and Development, George Read, states: “S tar Diamond Corporation is in
complete support of the design and equipment selection for the bulk sample plant. The modern flowsheet
and state-of-the-art XRT sorting technology used in this plant will replicate the flowsheet and equipment of
the processing plant that would be used on a potential future diamond mine . This bulk sample plant is
specifically designed to maximize liberation and recovery of diamonds throughout the - 25+0.85 millimetre
size range, and minimize diamond breakage, particularly among potential specials (plus 10.8 carat stones)
that may be recovered from both the Star and Orion South Kimberlites.”
2
About Star Diamond Corporation
Star Diamond Corporation is a Canadian based corporation engaged in the acquisition, exploration and
development of mineral properties. Shares of the Corporation trade on the TSX Exchange under the trading
symbol “DIAM”. The Corporation’s Star - Orion South Diamond Project is located in central Saskatchewan
some 60 kilometres east of the city of Prince Albert. The Project is in close proximity to established
infrastructure, including paved highways and the electrical power grid, which provide significant advantages
for future mine development.
The Corporation recently announced the positive results of the independent Preliminary Economic
Assessment (“PEA”) on the Project. The PEA estimates that 66 million carats of diamonds could be
recovered in a surface mine over a 38-year Project life, with a Net Present Value (“NPV”) (7%) of $2.0
billion after tax, an Internal Rate of Return (“IRR”) of 19% and an after-tax payback period of 3.4 years
after the commencement of diamond production (see News Release dated April 16, 2018). Star Diamond
commissioned the PEA and related Technical Report for the Star and Orion South Kimberlites and, as such,
the PEA and Technical Report are the sole responsibility of the Corporation. The PEA is based on
exploration and evaluation work conducted up to and including March 2017.
During 2017, the Corporation granted RTEC an option to earn up to a 60% interest in the Corporation’s Fort
à la Corne mineral properties (including the Star-Orion South Diamond Project) on the terms and conditions
contained in the Option Agreement (see News Release dated June 23, 2017). Completion of the proposed
2018 sampling program (First Option) does not entitle RTEC to an interest in the Corporation’s 100 percent
held Fort à la Corne mineral properties (including the Project).
All technical information in this p ress release has b een p repared un der the su pervision of George Read,
Senior Vice-President of Exploration and Development, a registered P rofessional Geoscientist in the
Provinces of Saskatchewan a nd British Columbia and Mark Shimell, Project Manager, a registered
Professional Geoscientist in the Province of Saskatchewan, who are the Corporation’s “Qualified Persons”
under the definition of NI 43-101.
Caution Regarding Forward-Looking Statements
This news release contains forward -looking statements as defined by certain securities laws, including the "safe
harbour" provisions of Canadian securities legislation and the United States Private Securities Litigation Reform Act of
1995. Forward-looking information is often, but not always, identified by the use of words such as "anticipate",
"believe", "expect", "plan", "intend", "forecast", "target", "project", "guidance", "may", "will", "should", "could",
"estimate", "predict" or similar words suggesting future outcomes or language suggesting an outlook. In particular,
statements regarding the Corporation's future operations, future exploration and development activities or other
development plans constitut e forward-looking statements. B y their nature, statements referring to mineral reserves,
mineral resources, PEA or TFFE constitute forward-looking statements.
Forward-looking statements in this press release include, but are not limited to , disclosure regarding the economics
and project parameters presented in the PEA, including, without limitation, IRR, NPV and other costs and economic
information, carats of diamonds to be recovered, pre- tax payback period, tonnes of kimberlite to be mined, carats per
tonne to be recovered (grade), diamond prices, life of mine, capital costs, length of pre- production period, possible
events, conditions or financial performance that is based on assumptions about future economic conditions and
courses of action; the timing and costs of future development and exploration activities on the C orporation's projects;
success of development and exploration activities; permitting time lines and requirements; time lines for further
studies; planned exploration and develo pment of properties and the results thereof; specifications and design of the
proposed bulk sampling plant; and planned expenditures and budgets and the execution thereof as well as statements
with respect to RTEC’s and the Corporation’s objectives for the ensuing year.
3
These forward-looking statements are based on the Corporation's current beliefs as well as assumptions made by and
information currently available to it and involve inherent risks and uncertainties, both general and specific.
Risks exist that forward-looking statements will not be achieved due to a number of factors including, but not limited
to, developments in world diamond markets, changes in diamond prices, risks relating to fluctuations in the Canadian
dollar and other currencies relat ive to the US dollar, changes in exploration, development or mining plans due to
exploration results and changing budget priorities of the Corporation or its partners, the effects of competition in the
markets in which the Corporation operates, the impact of changes in the laws and regulations regulating mining
exploration, development, closure, judicial or regulatory judgments and legal proceedings, operational and
infrastructure risks and the additional risks described in the Corporation's most recently f iled Annual Information
Form, annual and interim MD&A. The Corporation's anticipation of and success in managing the foregoing risks could
cause actual results to differ materially from what is anticipated in such forward -looking statements.
Although management considers the assumptions contained in forward- looking statements to be reasonable based on
information currently available to it, those assumptions may prove to be incorrect. When making decisions with
respect to the Corporation, investors and others should not place undue reliance on these statements and should
carefully consider the foregoing factors and other uncertainties and potential events. Unless required by applicable
securities law, the Corporation does not undertake to update any forw ard-looking statement that is made herein.
For further information: [email protected] or (306) 664-2202
www.stardiamondcorp.com
- END -