Almadex Samples 6.0 g/t gold and 2410 g/t Ag in New High Grade Surface Trend and Defines Large High Sulphidation Alteration System at Davis/Paradise in Nevada
NEWS RELEASE
September 22, 2022
Trading Symbols:
TSX-V: DEX
www.almadexminerals.com
Almadex Samples 6.0 g/t gold and 2410 g/t Ag in New High Grade Surface Trend and
Defines Large High Sulphidation Alteration System at Davis/Paradise in Nevada
VANCOUVER, B.C. Almadex Minerals Ltd. ("Almadex" or the "Company") (TSX-V: “DEX”) is pleased to
announce that it has received and compiled results from surface mapping and sampling of the
Davis/Paradise project in Nevada conducted in April, May and June of this year. This more detailed
sampling and mapping was focussed on areas identified and sampled in previous work on the project by
Almadex and others. Almadex holds the rights to earn 100% of the Davis/Paradise property, which covers
multiple targets, and is located approximately eight miles southeast of Gabbs, Nevada and five miles
northeast of the Paradise Peak gold mine, which was active from 1984 to 1994 (Figure 1). Follow-up field
work is currently underway to further define these zones.
Multiple zones of mineralisation have now been identified. Large zones of pervasive hydrothermal alteration
have also been defined. The latest exploration activities had two different objectives; general evaluation of
known showings and of previous exploration and historic mining areas, and to evaluate the size of the
southern lithocap zone based on an alteration characterisation study. Highlights of the results are as follows
and shown on the attached target maps:
At the western Peppercorn showing surface samples returned 0.4 metres @ 1.9 g/t gold and 1330
g/t silver, 0.2 metres @ 2.0 g/t gold and 415 g/t silver and a grab sample returned 6.0 g/t gold
and 2410 g/t silver ;
At the Davis North Zone, located 540 metres north of the Davis vein zone, three grab samples
returned 2.1, 18.5 and 36.3 g/t gold ;
At the Davidson mine, a chip sample over 0.3 metres returned 54.9 g/t gold and 865 g/t silver ,
and a 0.2 metre chip sample returned 21.4 g/t gold and 1095 g/t silver ;
At the Butler mine, a chip sample returned 0.2 metres @ 9.7 g/t gold ;
At the Twin Shaft showing grab samples returned 38 g/t gold and 261 g/t silver, 9.9 g/t gold and
64.3 g/t silver, 5.2 g/t gold and 122 g/t silver, and 3.5 g/t gold and 35.1 g/t silver .
At the southern Gold-Dyke zone mapping has defined a 1.35 kilometre trend of intense high
sulphidation alteration with quartz alunite cores surrounded by pyrophyllite and kaolinite-dickite
haloes. One of the grab samples in this area returned 8.3 g/t gold;
In the Sinter area 30 surface samples were taken averaging 0.2 g/t gold and 2.2 g/t silver including
a 30 cm chip sample of a banded vein crosscutting the sinter which returned 1.2 g/t gold and a
grab from a silicified breccia which returned 1.5 g/t gold .
J. Duane Poliquin, Chairman of Almadex commented, “The new surface sampling highlights the potential
for gold and silver on this multi-target project and continues to expand the footprint of alteration and related
mineralisation. The mapping has also better defined the intensity of hydrothermal alteration in the southern
high sulphidation target area which remains open. We look forward to further results from this surface
program and the target definition that will enable for future drilling of this exciting multi-target project.”
The project appears to cover three main hydrothermal mineralising events:
1. Gold-silver rich vein style mineralisation (intermediate sulphidation epithermal) at Davis,
Davidson, Butler, Peppercorn and Twin Shaft in the Northern part of the project.
2. Auriferous mineralisation found in the advanced argillic alteration zone (high sulphidation
epithermal, and porphyry lithocap alteration) at Gold-Dyke within the southern Paradise area
of the property. This is described in more depth below.
3. Chalcedony-quartz-adularia banded vein mineralisation (low sulphidation epithermal)
associate with paleo water table alteration including a preserved sinter, suggesting the
preservation of the high level portion of an epithermal system.
All targets represent separate exploration opportunities and require different targeting methodologies.
Surface sampling and fieldwork in both areas is ongoing.
Alteration Mapping in the Southern Paradise High Sulphidation-Porphyry Target Area
Spectral alteration mapping of surface outcrops at the southern Paradise portion of the project has identified
a main 1.35km (E-W) zone of advanced argillic alteration associated with high-sulfidation epithermal
mineralization and additional multiple regional indications of alteration associated with lithocaps. Strong
replacement with vuggy silica texture stands in the center of this large alteration area. This work resolved
clear alteration vectors/temperature gradients and defined alteration zoning interpreted to represent a well
preserved lithocap with alunite core zones haloed by pyrophyllite, dickite then hypogene kaolinite to
dominant muscovite alteration and finally to an outer peripheral propylitic alteration halo. High temperature
diaspore was detected indicating the presence of a potential feeder structure.
Further field mapping is currently underway to map for the presence of potassic alteration associated with
porphyry mineralization adjacent to or beneath the identified lithocap. This new mapping further confirms
that the Paradise area represents a large lithocap with potential for both gold-silver high sulphidation
mineralisation and porphyry copper mineralisation at depth, similar to that seen at the adjacent Paradise
Peak gold deposit where both styles of mineralisation were observed.
Qualified Persons and QA/QC
Jocelyn Pelletier, P.Geo. a Qualified Person as defined by National Instrument 43-101 ("NI 43-101"), has
reviewed, and approved the scientific and technical contents of this news release. The analyses reported
were carried out at ALS Chemex Laboratories of Reno, Nevada using industry standard analytical
techniques. For gold, samples are first analysed by fire assay and atomic absorption spectroscopy (“AAS”).
Samples that return values greater than 10 g/t gold using this technique are then re-analysed by fire assay
but with a gravimetric finish. Silver is first analysed by Inductively Coupled Plasma - Atomic Emission
Spectroscopy (“ICP-AES”). Samples that return values greater than 100 g/t silver by ICP-AES are then re
analysed by HF-HNO3-HCLO4 digestion with HCL leach and ICP-AES finish. Of these samples those that
return silver values greater than 1,500 g/t are further analysed by fire assay with a gravimetric finish.
Intervals that returned assays below detection were assigned zero values. Blanks, field duplicates and
certified standards were inserted into the sample stream as part of Almadex’s quality assurance and control
program which complies with National Instrument 43-101 requirements. A total of 119 surface rock grab
and chip samples were taken over the project in May and June from which the results are reported here.
These samples averaged 2.2 g/t gold and 84.2 g/t silver. The chip samples ranged in width from 0.05 to 2.0
metres in width. The samples were taken to better understand the distribution of mineralisation on the
property. True widths for surface sample intervals reported cannot be determined at this time.
About the Davis/Paradise Property
Almadex consolidated the Davis/Paradise Valley area during 2019 by optioning from the underlying owners
the Davis property, which adjoins the Paradise Valley property which had been staked by Almadex’s
predecessor company. The property now comprises 358 claims totalling approximately 2,800 hectares with
multiple targets, located approximately eight miles southeast of Gabbs, Nevada and five miles northeast of
the Paradise Peak gold mine.
About Almadex
Almadex Minerals Ltd. is an exploration company that holds a large mineral portfolio consisting of
exploration projects and NSR royalties in Canada, the U.S., and Mexico. This portfolio is the direct result
of many years of prospecting and deal-making by Almadex's management team. The Company remains
focussed on grassroots exploration, acquisition and drilling mineral projects, on its own and in partnership
with others, with the goal of creating new mineral resources and royalty holdings. The Company owns
several portable diamond drill rigs, enabling it to conduct cost effective first pass exploration drilling in
house.
On behalf of the Board of Directors,
“J. Duane Poliquin”
J. Duane Poliquin, Chairman
Almadex Minerals Ltd.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture
Exchange) accepts responsibility for the adequacy or accuracy of this release.
This news release includes forward-looking statements that are subject to risks and uncertainties. All statements within it, other than
statements of historical fact, are to be considered forward looking. Forward-looking statements in this news release relating to the
Company include, among other things, the follow-up field work and the Company’s future exploration activities at the Davis Paradise
property. Although the Company believes the expectations expressed in such forward-looking statements are based on reasonable
assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from
those in forward-looking statements. Factors that could cause actual results to differ materially from those in forward-looking
statements include market prices, exploitation and exploration successes, permitting, continued availability of capital and financing,
equipment availability, relationships with third-party clientele and their willingness or ability to continue to use the Company’s drills for
exploration, and general economic, market or business conditions. There can be no assurances that such statements will prove
accurate and, therefore, readers are advised to rely on their own evaluation of such uncertainties. The Company does not assume
any obligation to update any forward-looking statements, other than as required pursuant to applicable securities laws.
Contact Information:
Almadex Minerals Ltd.
Tel. 604.689.7644
Email: [email protected]
http://www.almadexminerals.com/