Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

CYG.V ·

Doré Copper Intersects 3.7 Meters at 9.41% Copper, 2.84 G/T GOLD and 36.5 G/T Silver at Corner BAY – Continues to Expand Deposit

Drill Results

PRESS RELEASE

DORÉ COPPER INTERSECTS 3.7 METERS AT 9.41% COPPER, 2.84 G/T GOLD

AND 36.5 G/T SILVER AT CORNER BAY – CONTINUES TO EXPAND DEPOSIT

Toronto, Ontario – January 19, 2022 – Doré Copper Mining Corp. (the "Corporation" or "Doré Copper")

(TSXV: DCMC; OTCQ X: DRCMF; FRA: DCM) is pleased to announce additional results from its 2021

drilling campaign at its flagship Corner Bay property, located in the Chibougamau mining camp,

approximately 40 kilometers by road from Chibougamau, Québec.

In 2021, Doré Copper completed 43 holes (including wedge holes) totaling 41,063 meters and is reporting

today the results from 13 holes. The assay results for the remaining 11 holes are pending. Prior results

were incorporated into the Mineral Resource Estimate announced on October 6, 2021.

These latest drill results have further expanded the deposit in three areas and will be incorporated , with

other pending results , into an updated Mineral Resource estimate of the Corner Bay deposit for the

preliminary economic assessment (“PEA”) anticipated at the end of the first quarter of 2022.

Drilling Highlights

Main Vein below dyke (Figure 1)

• Main Vein below dyke connected to Lower Deep Lens with five holes, including CB-21-45 with

3.8 meters of 2.97% Cu, 0.45 g/t Au and 4.4 g/t Ag, CB-21-47 with 7.35 meters of 5.08% Cu, 0.27

g/t Au and 8.6 5 g/t Ag and CB-21-49 with 7.1 meters of 3.24% Cu and 0.23 g/t Au – Two other

mineralized holes with assays pending

• Main Vein below dyke further extended at southern end with two holes

Main Vein above dyke (Figure 2)

• CB-21-52: 3.7 meters of 9.41% Cu, 2.84 g/t Au and 36.5 g/t Ag – Extending Main Vein above dyke

along strike.

• Results pending for four other mineralized holes that will further expand the zone along strike

and at depth

“We are continuing to have success in expanding the Corner Bay deposit. These positive drill results from

three different areas of the deposit , as well as pending assays from the remaining of the 2021 drilling

program, are expected to further increase the mineral resources that will be reported in the upcoming PEA”

stated Ernest Mast, President and CEO of Doré Copper. “The connection of the Main Vein above the dyke

with the Lower D eep Lens is very significant. In addition , the intercept in hole CB -21-52 is the highest

copper equivalent grade recorded in the history of the deposit. Our 2022 drilling plans include approximately

40,000 meters of infill drilling at Corner Bay to upgrade the Inferred Resource to Indicated Resource for the

feasibility study that will commence after the completion of the PEA at the end of Q1 2022.

Corner Bay Drilling Program

The r esults reported today from t he 2021 drilling program ha ve successfully continued to expand the

copper-gold mineralization at Corner Bay in three areas of the deposit (Figure 3), bringing the total strike

length to over 1,100 metres. Of significance, the intercepts in holes CB-21-44, CB-21-45, CB-21-47, CB-

21-49 and CB-21-51 have effectively connected the Main Vein below the dyke to the Lower Deep Lens

(Figure 1 and Table 1). Two additional holes with assays pending have intersected copper mineralization.

These seven holes cover approximately 200 meters of strike length and 250 meters of vertical depth.

2

In addition, CB-21-39, CB-21-41 and CB-21-42 have expanded the Main Vein below the dyke to the south

by approximately 100 meters (at certain elevations ) from the October 2021 Mineral Resource Estimate

(Figure 1). The other holes (CB-21-39W1, CB-21-40, CB-21-43 and CB-21-46) drilled at the southern limit

of the Main Vein below the dyke did not intersect any significant mineralization and have limited the southern

extension of the Main Vein.

Hole CB-21-52 intercepted 3.7 meters of 9.41% Cu, 2.84 g/t Au , 36.5 g/t Ag and 890 ppm Mo

(molybdenum) (Figure 2 and Table 1). This hole has expanded the Main Vein above the dyke along strike

to the south by approximately 50 meters. This intercept is the highest copper equivalent grade recorded in

the history of the deposit.

The Corporation continues to obtain high molybdenum values in the intersections reported e.g. 682 ppm in

hole CB-21-45, 582 ppm in hole CB-21-49, and 890 ppm in hole CB-21-52. Over the course of 2022, Doré

Copper plans to initiate molybdenum recovery test work as part of the feasibility study.

Figure 1. Long section view of the Corner Bay Main Vein below the dyke (blue horizontal line indicates

vertical depth of 880 meters).

3

Figure 2. Long section view of the Corner Bay Main Vein above the dyke.

Figure 3. Isometric view of the entire Corner Bay deposit. The diorite dyke bisects the deposit – Main Vein

above and east of the dyke and Main Vein below and west of the dyke.

4

Table 1. Corner Bay Property Drill Assays Highlights from the 2021 Drill Program

Hole From

(m)

To

(m)

Width1

(m)

Cu

(%)

Au

(g/t)

Ag

(g/t)

Mo

(ppm) Zone

CB-21-39 1,175.55 1,177.6 2.05 2.04 0.24 17.1 - Main Vein below dyke (south)

CB-21-39W1 No significant mineralization Main Vein below dyke (south)

CB-21-40 No significant mineralization Main Vein below dyke (south)

CB-21-41 967.6 971.1 3.5 2.66 0.40 16.6 195 Main Vein below dyke (south)

CB-21-42 1,045.0 1,048.0 3.0 2.71 0.18 22.3 - Main Vein below dyke (south)

CB-21-43 No significant mineralization Main Vein below dyke (south)

CB-21-44 1,191.6 1,193.75 2.15 2.42 0.46 4.3 322 Between Main Vein and Deep Lens

CB-21-45 1,157.2 1,161.0 3.8 2.97 0.45 4.4 682 Between Main Vein and Deep Lens

CB-21-46 No significant mineralization Main Vein below dyke (south)

CB-21-47

Including

1,230.0 1,237.35 7.35 5.08 0.27 8.6 182 Between Main Vein and Deep Lens

1,230.0 1,234.1 4.1 6.06 0.23 10.6 189 “

CB-21-49

including

1,122.3 1,128.4 7.1 3.24 0.23 - 582 Between Main Vein and Deep Lens

1,124.9 1,128.4 3.5 4.28 0.28 - 682 “

CB-21-51

including

1,141.5 1,146.9 5.4 2.24 0.10 - 142 Between Main Vein and Deep Lens

1,144.0 1,146.9 2.9 3.44 0.17 - 262 “

CB-21-52 598.9 602.6 3.7 9.41 2.84 36.5 890 Main Vein above dyke

1. The true width of the structures intersected is estimated at approximately 60-75% of the downhole width

Corner Bay Deposit

In the Mineral Resource estimate of October 6, 2021, t he Corner Bay deposit contains an Indicated

Resource of 2.66 Mt at 2.68% Cu and 0.26 g/t Au containing 157 million pounds of copper and 22,000

ounces of gold and an Inferred Resource of 4.54 Mt at 3.20% Cu and 0.27 g/t Au containing 320 million

pounds of copper and 39,000 ounces of gold , based on a cut-off grade of 1.3% Cu and a copper price of

US$3.75 per pound (refer to Technical Report dated November 10, 2021)2.

The Corner Bay deposit is hosted by the intrusive Lac Doré Complex on the southern flank of the

Chibougamau anticline. A regional north -northeastern diorite dyke also cuts the area. Several significant

shear zones oriented north -south and northwest -southeast have been identified in the area. The Corner

Bay area is characterized by copper porphyry style mineralization and by copper mineralization in shear

zones commonly associated with dykes related to the Chibougamau Pluton.

Drilling and Quality Control

The Company is using Miiken Drilling as the drilling contractor. Miiken is a joint venture between

Chibougamau Diamond Drilling Ltd., the First Nations community of Ouje-Bougoumou and the First Nations

community of Mistissini both located in the Eeyou Istchee territory.

Sample preparation was done at SGS Canada Inc. in Val-d’Or, Québec, and fire assay and ICP analysis

was done at SGS Canada Inc. in Burnaby, B .C. Samples were weighed, dried, crushed to 75% passing

2 mm, split to 250 g, and pulverized to 85% passing 75 microns. Samples were then fire assayed for Au

(50 g) and sodium peroxide fusion ICP-MS finish for 34 elements.

QA/QC is done in house by Doré Cop per Geologists with oversight from the Exploration Manager . The

check samples (blanks and standards – 4% of total samples with another 2% of core duplicates) that were

inserted into the sample batches are verified against their certified values and are dee med a pass if they

are within 3 standard deviations of the certified value. The duplicates are evaluated against each other to

determine mineralization distribution (nugget). If there are large discrepancies in the check samples, then

the entire batch is requested to be re-assayed.

5

Andrey Rinta, P.Geo., the Exploration Manager of the Corporation and a "Qualified Person" within the

meaning of National Instrument 43-101, has reviewed and approved the technical information contained in

this news release.

About Doré Copper Mining Corp.

Doré Copper Mining Corp. aims to be the next copper producer in Québec with a production target of +50

Mlbs of copper equivalent annually by implementing a hub -and spoke operation model with multiple high-

grade copper-gold assets feeding its centralized 2,700 tonnes per day mill. The Corporation is expected to

deliver a PEA at the end of the first quarter of 20 22 and then initiate a feasibility study and permit

applications.

The Corporation has consolidated a large land package in the prolific Lac Doré/Chibougamau and Joe

Mann mining camps that has produced 1.6 billion pounds of copper and 4.4 million ounces of gold1. The

land package includes 13 former producing mines, deposits and resource target areas within a 60-kilometre

radius of the Corporation’s Copper Rand Mill.

For further information, please contact:

Ernest Mast Laurie Gaborit

President and Chief Executive Officer Vice President, Investor Relations

Phone: (416) 792-2229 Phone: (416) 219-2049

Email: emast@Dorécopper.com Email: lgaborit@Dorécopper.com

For more information, please visit: www.dorecopper.com

Facebook: Doré Copper Mining

LinkedIn: Doré Copper Mining Corp.

Twitter: @DoreCopper

Instagram: @DoreCopperMining

1. Sources for historic production figures : Economic Geology, v. 107, pp. 963 –989 - Structural and Stratigraphic Controls on

Magmatic, Volcanogenic, and Shear Zone -Hosted Mineralization in the Chapais -Chibougamau Mining Camp, Northeastern

Abitibi, Canada by François Leclerc et al. (Lac Dore/Chibougamau mining camp) and NI 43-101 Technical Report on the Joe

Mann Property dated January 11, 2016 by Geologica Groupe-Conseil Inc. for Jessie Ressources Inc. (Joe Mann mine).

2. The Technical Report on the Corner Bay-Devlin Property, Northwest Québec, Canada dated November 10, 2021 was prepared

by Luke Evans, M.Sc., P.Eng. and Marie-Christine Gosselin, B.Sc., P.Geo., of SLR Consulting (Canada) Ltd., both “Independent

Qualified Persons” as defined by NI 43-101.

Cautionary Note Regarding Forward-Looking Statements

This news release includes certain "forward -looking statements" under applicable Canadian securities legislation.

Forward-looking statements include predictions, projections and forecasts and are often, but not always, identified by

the use of words such a s "seek", "anticipate", "believe", "plan", "estimate", "forecast", "expect", "potential", "project",

"target", "schedule", "budget" and "intend" and statements that an event or result "may", "will", "should", "could" or

"might" occur or be achieved and other similar expressions and includes the negatives thereof. Specific forward-looking

statements in this press release include, but are not limited to , four other mineralized holes in the Main Vein above

dyke with assays pending to further expand the zone along strike and at depth; positive drill results from three different

areas of the deposit, as well as pending assays from the remaining of the 2021 drilling program, expected to further

increase the mineral resources that will be reported in the upcoming P EA; 2022 drilling plans include approximately

40,000 meters of infill drilling at Corner Bay; PEA at the end of Q1 2022 ; 2022 plans to initiate molybdenum recovery

test work as part of the feasibility study; implementing a hub-and spoke operation model; and initiating a feasibility study

and permit applications after the PEA.

All statements other than statements of historical fact included in this release, including, without limitation, statements

regarding the timing and ability of the Corporation to receive necessary regulatory approvals, and the plans, operations

and prospects of the Corporation and its properties are forward -looking statements. Forward-looking statements are

necessarily based upon a number of estimates and assumptions that, while considered reasonable, are subject to

known and unknown risks, uncertainties an d other factors which may cause actual results and future events to differ

materially from those expressed or implied by such forward-looking statements. Such factors include, but are not limited

to, actual exploration results, changes in project parameter s as plans continue to be refined, future metal prices,

availability of capital and financing on acceptable terms, general economic, market or business conditions, uninsured

6

risks, regulatory changes, delays or inability to receive required regulatory approvals, health emergencies, pandemics

and other exploration or other risks detailed herein and from time to time in the filings made by the Corporation with

securities regulators. Although the Corporation has attempted to identify important factors that cou ld cause actual

actions, events or results to differ from those described in forward-looking statements, there may be other factors that

cause such actions, events or results to differ materially from those anticipated. There can be no assurance that such

statements will prove to be accurate, as actual results and future events could differ materially from those anticipated

in such statements. Accordingly, readers should not place undue reliance on forward -looking statements. The

Corporation disclaims any i ntention or obligation to update or revise any forward -looking statements, whether as a

result of new information, future events or otherwise, except as required by law.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is def ined in the

policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this

news release.