Dore Copper Confirms Copper Mineralization ON Its Cedar BAY Southwest Extension
PRESS RELEASE
DORE COPPER CONFIRMS COPPER MINERALIZATION ON ITS CEDAR BAY
SOUTHWEST EXTENSION
Toronto, Ontario – July 24, 2024 – Doré Copper Mining Corp. (the "Company" or "Doré Copper") (TSXV:
DCMC; OTCQB: DRCMF; FRA: DCM) completed two drill holes totaling 1,392 meters which successfully
extended the Southwest Zone of the former Cedar Bay copper-gold mine located in the Chibougamau
mining camp, approximately 5 kilometers by road from its Copper Rand mill.
The Southwest Zone is located 300 meters to the southwest of the Cedar Bay mine Main Zone and was
partially developed in late 1960s by Campbell Chibougamau Mines Limited (“Campbell”) on two levels (114
meters and 200 meters) right to the property limit with Patino Mining. The best results of Campbell’s drilling
campaign in the Southwest Zone included 5.2 meters of 2.56% Cu and 3.9 meters of 2.22% Cu and 1.3 g/t
Au1. The potential extension of the Cedar Bay Southwest Zone along strike to the southeast was never
tested by Patino Mining and subsequent companies that controlled that ground. In total, approximately
1,080 meters of strike length had not been tested up to the Lac Doré Fault.
The two drill holes completed by Doré Copper targeting the Southwest Zone to the southeast intersected
two zones of copper mineralization within strong ductile shear zone s with intense hydrothermal alteration.
Hole CDR-24-09 intersected 1.6 meters of 1.06% Cu and 20.7 g/t Ag , including 0.6 meter of 2.82% Cu,
54.8 g/t Ag and 0.33 g/t Au, at a vertical depth of 414 meters. The mineralized intersection is characterized
by strong pervasive carbonate-chlorite-sericite alteration with banded semi -massive chalcopyrite and
pyrrhotite associated with quartz veinlets . Hole CDR -24-10 intersected a wide shear structure of +130
meters (true width) characterized by pervasive black chlorite and carbonate veining alteration starting at a
vertical depth of 449 meters. Copper mineralization was intersected at a vertical depth of 541 meters with
0.40 meter of 1.70% Cu and 2.03 g/t Au , characterized by chalcopyrite disseminations and blebs in a
discontinuous massive iron oxide band. The strong alteration footprint intersected in hole CDR-24-10 in the
anorthosite to gabbroic rocks is characteristic of the Doré Lake Complex magmatic -hydrothermal system
and is interpreted to be an indicator of proximity to mineralized ore bodies of the Cu -Au central mining
camp.
The Company plans to conduct downhole geophysics to locate stronger conductors near and along the
structure as the first hole may not have crossed it. The strong alteration footprint intersected in the second
hole is promising as it indicates approximately 400 meters of strike length untested towards the Doré Lake
Fault.
Doré Copper received a grant from the Government of Qu ébec of approximately C$182,000 towards the
drilling program and geometallurgical characterization. The grant has been offered under the Mineral
Exploration Support Program for Critical and Strategic Minerals (Programme de soutien à l’exploration
minière pour les minéraux critiques et stratégiques 2021 -2024 or PSEM-MCS), which is overseen by the
Ministry of Natural Resources and Forests (Ministère des Ressources naturelles et des Forêts or MRNF).
Ernest Mast, President and CEO of Doré Copper , commented, “We have confirmed the extension of the
Cedar Bay Southwest structure towards the Lac Doré fault in two drill holes, including 1.6 meters of 1.06%
Cu and 20.7 g/t Ag. We are very excited by the strong alteration in a wide shear zone characteristic of the
large copper-gold ore bodies in the camp, including Doré Copper’s Copper Rand and Cedar Bay mines.
The next step is to conduct a downhole geophysical survey (pulse EM) to identify the potential for larger
mineralized zones along the structure followed by additional drilling . We would also like to thank the
Government of Québec for exploration grant and their support to develop the critical and strategic minerals
industry within the province.”
2
Cedar Bay Mine
The Cedar Bay mine operated from 1958 to 1990 and produced 3.9 million tonnes grading 1.56% Cu and
3.22 g/t Au2. The ore from the mine was processed at the Copper Rand mill located 5 kilometers by road.
The deposit was mined to a depth of 670.5 meters and the existing shaft extends to a depth of 1,036 meters.
Doré Copper completed four holes (including wedges) totaling 4,842 meters in 2018 and reported an
Indicated resource of 130,000 tonnes at 9.44 g/t Au and 1.55% Cu, and an Inferred resource of 230,000
tonnes at 8.32 g/t Au and 2.13% Cu (effective date of December 31, 2018) 3. During 2020, the Corporation
completed 9,025 meters of drilling and successfully extended a number of mineralized lenses (the 10-20A
and 10-20B).
Table 1. Assays Highlights from the 2024 Drill Program at Cedar Bay SW Extension
Hole Azimuth/
Dip
From
(m)
To
(m)
Width1
(m)
Au
(g/t)
Ag
(g/t)
Cu
(%) Zone
CDR-24-09 227°/47° 97.0 97.7 0.70 1.95 9.90 0.22 unknown
200.4 201.0 0.60 1.42 2.10 0.11 unknown
575.3 576.9 1.60 0.12 20.68 1.06 SW1
Including 575.7 576.3 0.60 0.33 54.80 2.82 SW1
CDR-24-10 190°/47° 757.2 757.6 0.40 2.03 1.50 1.70 SW2
762.0 762.7 0.70 1.27 0.35 0.16 unknown
1. The true width of the structures intersected is estimated at approximately 65-80% of the downhole width for Cedar Bay SW
Extension.
Figure 1. Plan View of Copper Rand Property Showing the Cedar Bay SW Target
3
Figure 2. Plan View and Long Section Showing the Cedar Bay Southwest Zone Extension
Drilling and Quality Control
The Company is using Miikan Drilling as the drilling contractor. Miikan is a joint venture between
Chibougamau Diamond Drilling Ltd., the First Nations community of Ouje-Bougoumou and the First Nations
community of Mistissini both located in the Eeyou Istchee territory.
Sample (HQ size half core) preparation and fire assay analysis were done at ALS Canada Ltd. (“ALS”) in
Val-d’Or, Québec, and ICP multi-elements analysis was done at ALS in Vancouver, B.C. Samples were
weighed, dried, crushed to 7 0% passing 2 mm, split to 250 g, and pulverized to 85% passing 75 microns.
Samples are fire assayed for gold (Au) (50 g) and Aqua Regia ICP-AES finish for key elements (Ag, Cu,
Mo). Samples assaying >10.0 g/t Au are re-analyzed with a gravimetric finish using a 50 g charge.
QA/QC is done in house by Doré Copper geologists with oversight from the Senior Geologist. The check
samples (blanks and standards – 4% of total samples with another 2% of core duplicates taken on half split
core) that were inserted into the sample batches are verified against their certified values and are deemed
a pass if they are within 3 s tandard deviations of the certified value. The duplicates are evaluated against
each other to determine mineralization distribution (nugget). If there are large discre pancies in the check
samples, then the entire batch is requested to be re-assayed.
Youssouf Ahmadou , M.Sc., P.Geo., Senior Exploration Geologist of the Company and a QP within the
meaning of National Instrument 43 -101 – Standards of Disclosure for Mineral Projects , has reviewed and
approved the scientific and technical information contained in this news release.
The Qualified Person ("QP") for the Company has not verified the historical sample analytical data disclosed
within this release. While the Company has obtained all historic records including analytical data from the
previous owners of the Property and fro m various government databases, the Company has not
independently verified the results of the historic sampling.
About Doré Copper Mining Corp.
Doré Copper Mining Corp. aims to be the next copper producer in Québec with an initial production target
of +50 Mlbs of copper equivalent annually by implementing a hub-and-spoke operation model with multiple
high-grade copper-gold assets feeding its centralized Copper Rand mill 3. The Company has delivered its
PEA in May 2022 and is proceeding with a feasibility study.
The Company has consolidated a large land package in the prolific Lac Doré/Chibougamau and Joe Mann
mining camps that has historically produced 1.6 billion pounds of copper and 4.4 million ounces of gold 2.
4
The land package includes 13 former producing mines, deposits and resource target areas within a 60 -
kilometre radius of the Company's Copper Rand Mill.
For further information, please contact:
Ernest Mast Laurie Gaborit
President and Chief Executive Officer Vice President, Investor Relations
Phone: (416) 792-2229 Phone: (416) 219-2049
Email: [email protected] Email: [email protected]
Visit: www.dorecopper.com
Facebook: Doré Copper Mining
LinkedIn: Doré Copper Mining Corp.
Twitter: @DoreCopper
Instagram: @DoreCopperMining
1. Reference: Bunkhouse zone (Cedar Bay SW) Longitudinal section (Campbell Chibougamau Mines Ltd 1976).
2. Sources for historic production figures: Economic Geology, v. 107, pp. 963 –989 - Structural and Stratigraphic Controls on
Magmatic, Volcanogenic, and Shear Zone -Hosted Mineralization in the Chapais -Chibougamau Mining Camp, Northeastern
Abitibi, Canada by F rançois Leclerc et al. (Lac Dore/Chibougamau mining camp) and NI 43 -101 Technical Report on the Joe
Mann Property dated January 11, 2016 by Geologica Groupe-Conseil Inc. for Jessie Ressources Inc. (Joe Mann mine).
3. Technical report titled "Preliminary Economic Assessment for the Chibougamau Hub -and-Spoke Complex, Québec, Canada"
dated June 15, 2022, in accordance with National Instrument 43-101 – Standards of Disclosure for Mineral Projects. The Technical
Report was prepared by BBA Inc. with several consulting firms contributing to sections of the study, including SLR Consulting
(Canada) Ltd., SRK Consulting (Canada) Inc. and WSP Inc.
Cautionary Note Regarding Forward-Looking Statements
This news release includes certain "forward -looking statements" under applicable Canadian securities legislation.
Forward-looking statements include predictions, projections and forecasts and are often, but not always, identified by
the use of words such a s "seek", "anticipate", "believe", "plan", "estimate", "forecast", "expect", "potential", "project",
"target", "schedule", "budget" and "intend" and statements that an event or result "may", "will", "should", "could" or
"might" occur or be achieved and oth er similar expressions and includes the negatives thereof. All statements other
than statements of historical fact included in this news release, including, without limitation, statements with respect to
the timing and ability of the Company to receive necessary regulatory approvals , the Company's ability to meet its
production target, the commencement, timing and completion of a feasibility study, and the plans, operations and
prospects of the Company and its properties are forward -looking statements. Forward -looking statements are
necessarily based upon a number of estimates and assumptions that, while considered reasonable, are subject to
known and unknown risks, uncertainties and other factors which may cause actual results and future events to differ
materially from those expressed or implied by such forward-looking statements. Such factors include, but are not limited
to, actual exploration results, changes in project parameters as plans continue t o be refined, future metal prices,
availability of capital and financing on acceptable terms, general economic, market or business conditions, uninsured
risks, regulatory changes, delays or inability to receive required regulatory approvals, health emergencies, pandemics
and other exploration or other risks detailed herein and from time to time in the filings made by the Company with
securities regulators. Although the Company has attempted to identify important factors that could cause actual actions,
events or results to differ from those described in forward -looking statements, there may be other factors that cause
such actions, events or results to differ materially from th ose anticipated. There can be no assurance that such
statements will prove to be accurate, as actual results and future events could differ materially from those anticipated
in such statements. Accordingly, readers should not place undue reliance on forward-looking statements. The Company
disclaims any intention or obligation to update or revise any forward -looking statements, whether as a result of new
information, future events or otherwise, except as required by law.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of
the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.