Copper Fox Announces Initial Phase Ii Analytical Results from Van Dyke Oxide Copper Deposit
COPPER FOX ANNOUNCES INITIAL PHASE II ANALYTICAL RESULTS
FROM VAN DYKE OXIDE COPPER DEPOSIT
Calgary, Alberta– July 9, 2019. Copper Fox Metals Inc. (“Copper Fox” or the “Company”) (TSX-V: CUU –
OTC-Pink: CPFXF) and its wholly owned subsidiary, Desert Fox Copper Inc. (“ Desert Fox”) are pleased to
announce the initial results (469 samples) from the Phase II analytical program on the Van Dyke In-Situ Leach
oxide copper deposit (see news release May 28, 2019).
Highlights:
DDH-OXY-17B returned an average of 0.297% acid soluble copper (“ASCu”) over a 137.40m core
interval including a 14.93m interval grading 1.022% ASCu.
DDH OXY-29 returned an average of 0.362% ASCu over a 144.48m including a 25.64m core interval
grading 0.839% ASCu.
7 of the 8 drill holes reported in this news release returned significantly thicker mineralized intervals
compared to the historical mineralized intervals.
The ASCu/TCu ratio for holes reported in this news release averaged 73.1% compared to 60.7% in the
historical database.
Elmer B. Stewart, President and CEO of Copper Fox, stated, “The Phase II analytical program continues to return
higher concentration s of acid soluble copper over significantly thicker mineralized interval s compared to the
historical database. Updating of the geological model for the Van Dyke oxide copper deposit has significantly
increased confidence in understanding the controls on the mineralization. Contingent on receipt of all analytical
results f rom the Phase II analytical program, Copper Fox will assess the possibility of completing an updated
resource estimate for the project.”
The weighted average acid soluble copper concentrations using a 0.05% ASCu cutoff for the drill holes reported in
this news release are shown below. To compare the weighted average grades between the historical and 2019
analytical results, the analytical results from the historical database w ere weight averaged over the same interval
corresponding to the 2019 interval.
DDH From To Interval 2019 Historical 2019 Historical Acid Soluble
ID Azi Dip (m) (m) (m) TCu (%) TCu (%) ASCu (%) ASCu (%) 2019/Historical (%)
OXY-17B* 0 -90 308.76 446.23 137.47 0.513 0.535 0.297 0.224 133%
including 343.51 347.17 3.66 1.225 1.276 1.056 0.948 111%
including 363.02 377.95 14.93 1.168 1.226 1.022 0.961 106%
OXY-27* 0 -90 522.12 657.45 135.33 0.331 0.351 0.284 0.250 114%
including 544.98 556.56 11.58 0.777 0.858 0.713 0.750 95%
VD-6 0 -90 361.49 500.48 138.99 0.330 0.354 0.296 0.268 110%
including 376.43 379.78 3.35 1.315 1.410 1.311 1.282 102%
VD-9 0 -90 547.12 576.99 29.87 0.334 0.335 0.154 0.037 416%
VD-10 0 -90 312.72 349.30 36.58 0.613 0.620 0.200 0.037 541%
369.42 395.63 26.21 0.584 0.586 0.170 0.011 1545%
OXY-29 0 271.27 415.75 144.48 0.508 0.525 0.362 0.384 94%
including 279.50 305.11 25.61 1.043 1.079 0.839 0.896 94%
including 313.03 319.13 6.10 1.39 1.479 1.261 1.378 92%
2
OXY-22 0 -90 403.57 546.81 143.24 0.135 0.151 0.093 0.059 158%
OXY-18 0 -90 398.07 529.13 131.06 0.357 0.356 0.309 0.263 117%
including 421.54 436.17 14.63 1.290 1.275 1.176 1.098 107%
551.38 629.11 77.73 0.289 0.296 0.127 0.065 195%
including 583.39 584.91 1.52 1.753 1.209 1.617 1.026 158%
TCu= total copper, (%) = percent, (m) = meters, ASCu = acid soluble copper, the above mineralized intervals do not represent true widths.
*partial results reported in 2014.
The following table compares the thickness of the 2019 mineralized intervals (based on 0.05% ASCu cut-off) to the
reported historical mineralized intervals for the eight holes reported in this news release.
2019 Results
Historical Results
DDH From To Interval From To Interval Thickness (m)
ID (m) (m) (m) (m) (m) (m) 2019 minus historical(m)
OXY-17B* 308.76 446.23 137.47 336.19 396.85 60.66 76.81
OXY-27* 522.12 657.45 135.33 521.21 655.32 134.11 1.22
VD-6 361.49 500.48 138.99 361.49 459.64 98.15 21.33
480.97 500.48 19.51
VD-9 547.12 576.99 29.87 N/R N/R 0 29.87
VD-10 312.72 349.30 36.58 N/R N/R 0 36.58
369.42 395.63 26.21 N/R N/R 0 26.21
OXY-29* 271.27 415.75 144.48 268.22 366.67 98.45 46.03
OXY-22 403.57 546.81 143.24 408.74 491.03 82.29 60.95
OXY-18 398.07 529.13 131.06 408.74 442.57 33.83 42.06
469.09 524.26 55.17
551.38 629.11 77.73 574.55 588.26 13.71 64.02
TCu = total copper, (%) = percent, (m) = meters, ASCu = acid soluble copper, the above mineralized intervals do not represent true widths .
NR = no analysis above 0.05% ASCu. *partial results reported in 2014.
The weighted average grades for the mineralized intervals were estimated using a 0.05% ASCu cutoff, in line with
the cutoff grade used in the maiden resource estimate for the Van Dyke project completed in 2014. A maximum
interval of three meters grading less than 0.05% ASCu within the mineralized interval was tolerated when estimating
the weighted average.
Analytical Procedures:
Sample preparation and analytical work was completed by Skyline Assayers & Laboratories located in Tucson,
Arizona. Skyline’s package codes CuT, CuSeq and CuCn were used to determine total copper, sequential copper
and cyanide soluble copper. Sequential copper analysis uses a 0.25-gram sample digested (at room temperature) in
5% sulfuric acid and the solution is then d iluted to 100 mL with deionized water. The residue from the sample is
digested in 10% sodium cyanide solution and diluted to 100 mL. Atomic Absorption Spectrometry (“AAS”) was
used to determine copper concentrations. Skyline has an ISO/IEC 17025/2005 accreditation.
Quality Control:
A total of 15 blanks and 28 certified reference standards were inserted (insertion rate 1:11) with the sample s for
which analyses are being reported. The Skyline results for the blank and standards were within +/-5% of accepted
value for the blank and standards.
3
Elmer B. Stewart, MSc. P. Geol., President and CEO of Copper Fox, is the Company’s non-independent, nominated
Qualified Person pursuant to National Instrument 43 -101, Standards for Disclosure for Mineral Projects, and has
reviewed and approves the scientific and technical information disclosed in this news release.
About Copper Fox:
Copper Fox is a Tier 1 Canadian resource company listed on the TSX Venture Exchange (TSX -V: CUU) focused
on copper exploration and development in Canada and the United States. The principal assets of Copper Fox and
its wholly owned Canadian and United States subsidiaries, being Northern Fox Copper Inc. and Desert Fox Copper
Inc., are the 25% interest in the Schaft Creek Joint Venture with Teck Resources Limited on the Schaft Creek
copper-gold-molybdenum-silver project located in northwestern British Columb ia and a 100% ownership of the
Van Dyke oxide copper project located in Miami, Arizona. For more information on Copper Fox’s other mineral
properties and investments visit the Company’s website at http://www.copperfoxmetals.com.
On behalf of the Board of Directors
Elmer B. Stewart
President and Chief Executive Officer
For additional information contact:
Copper Fox Metals Inc.
Lynn Ball: [email protected]
(844) 464-2820 or (403) 264-2820
www.copperfoxmetals.com
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies
of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Cautionary Note Regarding Forward-Looking Information
This news release contains forward-looking statements within the meaning of the Section 27A of the Securities Act
of 1933 and Section 21E of the Securities Exchange Act of 1934, and forward -looking information within t he
meaning of the Canadian securities laws (collectively, “forward -looking information”). Forward -looking
information is generally identifiable by use of the words “believes,” “may,” “plans,” “will,” “anticipates,” “intends,”
“budgets”, “could”, “estimates”, “expects”, “forecasts”, “projects” and similar expressions, and the negative of such
expressions. Forward-looking information in this news release includes statements regarding: higher acid soluble
copper concentrations and thicker mineralized intervals than the initial analytical results; the geological model has
significantly increased confidence in understanding the controls on the mineralization and the possibility of
completing an updated resource estimate.
In connection with the forward-looking information contained in this news release, Copper Fox and its subsidiaries
have made numerous assumptions regarding, amon g other things: the geological advice that Copper Fox has
received is reliable and is based upon practices and methodologies which are consistent with industry standards and
the re liability of historical reports . While Copper Fox considers these assumptions to be reasonable, these
assumptions are inherently subject to significant uncertainties and contingencies.
Additionally, there are known and unknown risk factors which could cause Copper Fox’s actual results,
performance or achievements to be materially different from any future results, performance or achievements
expressed or implied by the fo rward-looking information contained herein. Known risk factors include, among
others: additional sampling may not located significant concentrations of soluble copper ; the possibility that an
updated resource estimate on the Van Dyke project may not be completed within a reasonable time frame or at all;
4
the possibility that the update geological model may not be completed within a reasonable time frame or at all;
uncertainties relating to interpretation of the analytical results; the geology, continuity and concentration of the
mineralization; the financial markets and the overall economy may deteriorate; the need to obtain additional
financing; uncertainty as to timely availability of permits and other governmental approvals.
A more complete discussion of the risks and uncertainties facing Copper Fox is disclosed in Copper Fox's
continuous disclosure filings with Canadian securities regulatory authorities at www.sedar.com. All forward -
looking information herein is qualified in its entirety by this cautionary statement, and Copper Fox disclaims any
obligation to revise or update any such forward -looking information or to publicly announce the result of any
revisions to any of the forward -looking information contained herein to reflect future results, events or
developments, except as required by law.