Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

CONE.V ·

Canada One Provides Exploration Review of Combination Creek Zone, Copper Dome Project

Corporate Updates

#250 – 750 West Pender St. Vancouver, British Columbia, V6C 2T7

CANADA ONE PROVIDES EXPLORATION REVIEW OF COMBINATION CREEK ZONE, COPPER

DOME PROJECT

Vancouver, B.C., October 22, 2025 - Canada One Mining Corp. (“Canada One” or the “Company”)

(TSXV: CONE) (OTC: COMCF) (FSE: AU31) is pleased to provide a n exploration review of the

Combination Creek Zone at its 100% owned Copper Dome Project , (“Copper Dome”, “Project” or

“Property”), Princeton B.C.

COMBINATION CREEK ZONE HIGHLIGHTS

▪ Location: ~3.5 km south of the Copper Mountain Mine deposits

▪ Historical Drilling: 5,732m of diamond drilling in 22 holes2

▪ Dill Hole PT-12-26: 20.00m of 0.64% Cu, including 14.00m of 0.86%, starting at

141.00m and 145.00m, respectively.

▪ Drill Hole PT-11-18: 102.25m of 0.11% Cu, including 6.00m of 0.25%, starting at

3.28m and 74.00m, respectively.

▪ Drill Hole PT-10-06: 19.50m of 0.34% Cu, including 4.50m of 0.36% Cu%,

starting at 106.50m and 121.50m, respectively.

▪ Drill Hole PT-11-21: 69.00m of 0.21% Cu, including 12.00m of 0.49% Cu,

starting at 18.00m and 99.00m, respectively.

▪ Historical Grab Samples: returning up to 1.97% Cu and 10.7 g/t Ag1

▪ Historical Chip Samples: averaging 0.563% Cu and 3.6 g/t Ag over 5 m1

▪ Excellent Camp Setting: Intrusive–volcanic contacts beside an operating mine

Peter Berdusco, President and CEO of the Company commented: “The Combination Creek zone

provides compelling evidence of a mineralizing system extending south from Copper Mountain.

Historical work has confirmed strong copper grades across multiple drill holes. The scale of veining,

consistent copper mineralization, a nd proximity to the Copper Mountain mine all suggest we may be

exploring within the broader halo of a porphyry centre. As we advance our exploration model, we see

clear potential to outline a porphyry-style target next to an operating mill.”

Combination Creek Review

The Combination Creek Zone located in the northeast corner of the Copper Dome Project (See Figure

1: Location Map of the Copper Dome Project) shows stockwork veining associated with altered volcanic

and sedimentary rocks adjacent to the Copper Mountain stock. Two historical mineral occurrences have

been identified in this area – The Marquis of Lorne and the Skagit 1 Fraction Zone, both of which exhibit

strong structural controls on mineralization and sulphide development. Historical mapping and

descriptions indicate intense alteration characterized by assemblages of epidote –chlorite–Fe oxide ±

albite, with pyrite –chalcopyrite and associated malachite oxidation. The presence of albite and

chalcopyrite within the traditionally propylitic chlorite –epidote-pyrite alteration front suggests that this

zone may represent a transition toward a higher-temperature potassic domain of a porphyry system.

The best mineralization in the Combination Creek zone drilled to date is found in a 70 to 100m wide

section of Nicola volcanics extending at least 250m east west, bounded to the north by the Copper

Mountain Stock and to the south by a coarse pink feldspar porphyry syenite dyke.

Selective Historical Drill Results

Drilling by the Company in 2010, 2011 and 2012 in the Combination Creek Zone returned the following

highlighted intercepts (See Figure 2: Map of Combination Creek Zone with Selected Historical Drill Hole

Locations and Results (Cu):

• DDH PT-10-01: 20.00m of 0.28% Cu, including 5m of 0.59% Cu, starting at 27.50m.

• DDH PT-10-02: 47.50m of 0.19% Cu, including 22.50m of 0.26% Cu, starting at 37.00m

• DDH PT-10-06: 19.50m of 0.34% Cu starting at 106.50m and 3.00m of 0.93% Cu starting at

247m.

• DDH PT-11-16: 10.00m of 0.65% Cu starting at 231m and 25.31m of 0.21% Cu starting at 3.69m.

• DDH PT-11-18: 68.25m of 0.14% Cu starting at 3.28m, including 6.00m of 0.25% Cu starting at

74m, and 6.00m of 0.29% Cu starting at 313m.

• DDH PT-11-21: 69.00m of 0.21% Cu starting at 18.00m, including 12.00m of 0.50% Cu starting

at 99.00m.

• DDH PT-12-26: 20.00m of 0.64% Cu starting at 141.00m, including 14.00m of 0.86% Cu starting

at 145.00m.

Mineral Occurrences of the Combination Creek Zone

Marquis of Lorne

The Marquis of Lorne prospect is underlain by the eastern facies of the Upper Triassic Nicola Group,

composed mainly of mafic augite and hornblende porphyritic pyroclastics and flows. These are intruded

by Early Jurassic Copper Mountain and Lost Horse intr usions—diorite, monzonite, and locally

pyroxenite and gabbro. Mineralization occurs in shear zones within andesitic and cherty tuffs, close to

the Copper Mountain stock, typically within 50m of its margin.

The best -defined shear zone, located 40m south of the stock, hosts strong limonite, jarosite, and

malachite alteration, with historical grab samples returning up to 1.97% Cu and 10.7 g/t Ag, and chip

samples averaging 0.563% Cu and 3.6 g/t Ag over 5 m. A parallel shear zone 60m southwest returned

1.53% Cu and 17.1 g/t Ag in grab samples. Additional narrow shears 200 m west -southwest show

traces of chalcopyrite and malachite with albite alteration.

Skagit 1 Fraction

The Skagit No. 1 prospect shares similar geology with Marquis of Lorne, being hosted in the Upper

Triassic Nicola Group volcanic rocks intruded by the Copper Mountain and Lost Horse intrusions. The

occurrence consists of several sulphid e-rich shear zones and fractures in andesitic tuff and minor

volcanic sediments, located within 60m of the Copper Mountain stock. Mineralization includes bornite,

chalcopyrite, and malachite, with historical surface chip samples averaging 0.36% Cu and 2.3 g/t Ag

over 10 m, and trench samples grading 0.28% Cu and 2.9 g/t Ag over 30 m.1

The property was mapped and sampled by Newmont (1970 –71), Kidd Creek Mines (1983), and later

Targa Resources (1986). After limited activity for two decades, the Company conducted a major

exploration program in 2010, including 26.4 km of induced polarization and magnetometer surveys plus

5,732 metres of diamond drilling in 22 holes. Drilling intersected 0.21% Cu over 69 metres (DDH PT11-

21), and geophysical data revealed a strong (>35 ms) chargeability anomaly in the Nicola volcanics

south of the Copper Moun tain stock, suggesting potential for porphyry -style copper -gold

mineralization.1

Figure 1: Location Map of the Copper Dome Project

Figure 2: Map of Combination Creek Zone with Selected Historical Drill Hole Locations and Results (Cu)

About The Copper Dome Project

Copper Dome is located in the lower Quesnel Trough porphyry belt, one of British Columbia’s most

prolific mining districts. The Project directly adjoins Hudbay Minerals Inc.’s (TSX: HBM) producing

Copper Mountain Mine to the north which hosts Proven and Probable Reserves of 702 million tonnes

grading 0.24% Cu, 0.09 g/t Au, and 0.72 g/t Ag (hudbayminerals.com). Multiple mineralized zones have been

identified across the Property, with historical drilling confirming high -grade copper associated with

northeast-trending structures similar to those hosting mineralization at Copper Mountain.

The Project benefits from excellent infrastructure, enabling year -round access, cost -efficient

exploration, and a stable, low-risk jurisdiction.

Historical Work Completed

• Geophysics: 51 km of induced polarization (IP); airborne magnetic and electromagnetic (EM)

coverage over ~50% of the Property

• Sampling: 2,253 soils and 378 rocks collected

• Drilling: 8,900+ m of diamond drilling

• Trenching: Over 1 km excavated

With a five -year drill permit in place, the Company is focused on advancing the Project toward drill-

ready target definition.

About Canada One

Canada One Mining Corp. is a Canadian junior exploration company focused on copper—the critical

metal powering the global energy transition. The Company advances projects from discovery through

resource definition with disciplined, data -driven exploration and responsible practices. Its flagship

Copper Dome Project, near Princeton, British Columbia, targets a porphyry copper -gold system in a

Tier-1 jurisdiction. Canada One aims to deliver sustainable growth and long-term value for shareholders

and local communities.

Acknowledgement

Canada One acknowledges that the Copper Dome Project is located within the traditional, ancestral

and unceded territory of the Smelqmix People. We recognize and respect their cultural heritage and

relationship to the land, honoring their past, present and future.

Qualified Person

The technical information contained in this news release has been reviewed and approved by David

Mark, P.Geo., an independent Qualified Person for the purposes of National Instrument 43-101.

Historical Sampling

The sampling was done to the standards of the time and is considered “historical” in nature and is not

NI43-101 compliant and cannot be relied upon. The results are listed here to show why the Company

is interested in this area. Future work and drilling may not repeat similar results.

Note 1: Mark, (2024), Exploration Report on MMI Soil Sampling, Rock Sampling and Backpack Drilling on the Copper Dome Property

Copper Mountain Mine Area Similkameen Mining Division, British Columbia, AR 41492, pages 14-15.

Note 2: St. Clair Dunn, (2011), Report on 2010-2011 Drilling and Geophysical Programs on the Princeton Property, AR 33070, pages

12-19

Contact Us

For further information, interested parties are encouraged to visit the Company’s website at

www.canadaonemining.com, or contact the Company by email at [email protected], or by

phone at 1.877.844.4661.

On behalf of the Board of Directors of

CANADA ONE MINING CORP.

Peter Berdusco

President

Chief Executive Officer

Interim Chief Financial Officer

Forward-Looking Statements

This press release includes certain "forward -looking information" and "forward-looking statements" (collectively "forward-looking statements") within the

meaning of applicable Canadian securities legislation. All statements, other than statements of historical fact, included herein, without limitation, statements

relating to the future operating or financial performance of the Company, are forward looking statements. Forward-looking statements are frequently, but

not always, identified by words such as "exp ects", "anticipates", "believes", "intends", "estimates", "potential", "possible", and similar expressions, or

statements that events, conditions, or results "will", "may", "could", or "should" occur or be achieved. Forward -looking statements in this press release

relate to, among other things: statements relating to the anticipated timing thereof and the intended use of proceeds. Actual future results may differ

materially. There can be no assurance that such statements will prove to be accurate, and actua l results and future events could differ materially from

those anticipated in such statements. Forward looking statements reflect the beliefs, opinions and projections on the date th e statements are made and

are based upon a number of assumptions and estimates that, while considered reasonable by the respective parties, are inherently subject to significant

business, technical, economic, and competitive uncertainties and contingencies. Many factors, both known and unknown, could c ause actual results,

performance or achievements to be materially different from the results, performance or achievements that are or may be expressed o r implied by such

forward-looking statements and the parties have made assumptions and estimates based on or related to many of the se factors. Such factors include,

without limitation: the timing, completion and delivery of the referenced assessments and analysis. Readers should not place undue reliance on the

forward-looking statements and information contained in this news release c oncerning these times. Except as required by law, the Company does not

assume any obligation to update the forward-looking statements of beliefs, opinions, projections, or other factors, should they change, except as required

by law.

TSX Venture Exchange Disclaimer

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Ven ture Exchange) accepts

responsibility for the adequacy or accuracy of this release.