Cerro de Pasco Resources Reports Additional Results from the Quiulacocha Silver-Zinc-Lead Zone
Cerro de Pasco Resources Reports Additional Results from the Quiulacocha
Silver-Zinc-Lead Zone
Montreal, Quebec, December 18, 2024 – Cerro de Pasco Resources Inc. (CSE: CDPR)
(OTCQB: GPPRF) (FRA: N8HP) (“CDPR” or the “Company”) is pleased to report assay results
for an additional seven drill holes from the Quiulacocha Tailings Project in Central Peru.
Highlights - All intersections are in core lengths from surface and correspond to the
predominant silver-zinc-lead zone in the northern section of the deposit:
• Hole SPT15 intersected 19 meters (“m”) of 73.09 grams per tonne (“ g/t”) silver (“Ag”),
2.10% Zinc (“Zn”), 0.90% Lead (“Pb”), and 27.30 g/t gallium (“Ga”)
• Hole SPT16 intersected 19 m of 55.44 g/t Ag, 1.64% Zn, 0.70% Pb, and 26.21 g/t Ga
• Hole SPT17 intersected 21 m of 54.71 g/t Ag, 1.50% Zn, 0.70% Pb, and 31.05 g/t Ga
• Hole SPT18 intersected 22 m of 50.27 g/t Ag, 1.31% Zn, 0.65% Pb, and 28.99 g/t Ga
• Hole SPT34 intersected 15 m of 58.77 g/t Ag, 1.79% Zn, 0.70% Pb, and 31.29 g/t Ga
• Hole SPT37 intersected 18 m at 50.51 g/t Ag, 1.28% Zn, 0.89% Pb, and 49.26 g/t Ga
• Hole SPT38 intersected 18 m at 50.38 g/t Ag, 1.48% Zn, 0.96% Pb, and 55.68 g/t Ga.
"Today’s drillhole results are highly encouraging and exceed our initial projections ,
particularly regarding silver continuity and grade,” stated Guy Goulet, CEO. “In addition
to silver, zinc, lead, copper, and gold, the consistent presence of gallium exceeds
expectations and provide s a potentially significant upside to the project's economics.
With China’s recent move to ban exports of this rare metal to the US, gallium prices have
soared, with its significance now emerging for many. Representative composite samples
will now undergo metallurgical testing to support future studies. These findings will
inform our planning for an extended drilling campaign.”
The results demonstrate that the metal content is continuous at depth and laterally across 400
meters of the drilled area (Figure 1). The assay results for each of the seven drill holes are
presented in Tables 1 to 7.
The Iron results also indicate a consistent presence of pyrite throughout the deposit. Pyrite
(indicatively 50% of the tailings) may represent a valuable by -product for the project. The
upcoming metallurgical test work program will also evaluate the potential for pyrite recovery,
including estimated grade, by-products and impurities.
Figure 1: 40-hole Quiulacocha Drill Program showing drillholes related to this press release
Table 1. Assay results, Drillhole SPT15
Drillhole: SPT15
From To Ag (oz/t) Ag (g/t) % Zn % Pb % Cu Au (g/t) Ga (g/t) In (g/t) % Fe
0 1 2.11 65.55 1.01 0.71 0.09 0.07 59.76 39.56 27.98
1 2 1.88 58.44 1.13 0.62 0.09 0.06 53.60 50.88 33.56
2 3 1.44 44.79 1.25 0.49 0.03 0.03 33.60 19.48 32.87
3 4 2.04 63.46 2.22 0.72 0.04 0.03 19.80 22.05 32.45
4 5 4.65 144.72 3.76 2.22 0.06 0.04 20.76 24.00 35.22
5 6 4.72 146.74 4.81 2.44 0.06 0.03 17.52 24.80 29.81
6 7 2.98 92.74 3.05 1.05 0.06 0.03 20.88 24.97 34.20
7 8 2.12 66.05 2.60 0.77 0.05 0.03 17.86 20.29 34.40
8 9 1.94 60.31 2.17 0.63 0.06 0.04 16.34 16.57 36.22
9 10 2.06 64.22 2.31 0.70 0.07 0.04 14.46 17.40 37.71
10 11 1.74 54.18 1.75 0.59 0.06 0.04 16.92 14.92 35.75
11 12 1.77 54.98 1.60 0.57 0.06 0.05 19.65 15.80 35.45
12 13 1.68 52.21 1.25 0.58 0.07 0.08 18.20 14.14 36.09
13 14 1.87 58.25 1.91 1.62 0.12 0.10 77.56 20.60 32.52
14 15 1.67 52.09 1.72 0.79 0.15 0.23 26.00 16.82 32.97
15 16 1.72 53.42 2.05 0.70 0.23 0.36 19.01 16.91 32.21
16 17 1.76 54.79 2.15 0.65 0.23 0.35 17.76 18.97 32.30
17 18 1.96 60.84 2.08 0.56 0.29 0.47 18.92 19.95 32.21
18 19 4.53 140.90 1.17 0.71 0.45 0.21 30.12 17.26 39.29
Mean 2.35 73.09 2.10 0.90 0.12 0.12 27.30 21.86 33.85
Table 2. Assay results, Drillhole SPT16
Drillhole: SPT16
From To Ag (oz/t) Ag (g/t) % Zn % Pb % Cu Au (g/t) Ga (g/t) In (g/t) % Fe
0 1 2.79 86.91 0.86 0.85 0.03 0.05 42.32 19.00 32.77
1 2 2.41 74.90 0.92 0.70 0.03 0.05 33.16 20.49 31.85
2 3 1.33 41.42 1.05 0.48 0.03 0.03 39.20 21.17 31.82
3 4 1.28 39.90 1.05 0.48 0.03 0.03 22.80 20.91 31.38
4 5 1.39 43.09 1.15 0.49 0.03 0.03 29.52 20.59 33.62
5 6 1.91 59.32 1.95 0.67 0.04 0.03 18.24 12.96 31.65
6 7 2.15 66.84 2.38 0.78 0.05 0.04 16.08 13.48 35.89
7 8 2.02 62.85 3.17 0.74 0.04 0.04 18.13 22.05 37.85
8 9 2.00 62.36 2.57 0.73 0.05 0.03 19.61 20.21 33.91
9 10 2.05 63.88 2.34 0.63 0.05 0.03 18.99 18.74 29.24
10 11 1.46 45.30 1.45 0.75 0.07 0.03 20.32 18.07 31.61
11 12 1.55 48.18 1.31 0.80 0.08 0.03 32.48 18.12 28.99
12 13 1.65 51.19 1.56 0.76 0.08 0.07 14.68 18.58 32.88
13 14 1.57 48.91 1.36 0.92 0.09 0.07 30.84 21.32 31.25
14 15 1.53 47.61 1.26 0.86 0.09 0.08 40.08 21.20 29.59
15 16 1.58 49.02 1.65 0.78 0.13 0.16 27.84 21.07 31.43
16 17 1.74 54.11 1.81 0.73 0.20 0.19 27.04 21.92 32.77
17 18 1.83 56.89 1.87 0.60 0.23 0.27 25.52 17.05 31.05
18 19 1.63 50.62 1.41 0.46 0.24 0.43 21.20 15.59 29.14
Mean 1.78 55.44 1.64 0.70 0.08 0.09 26.21 19.08 32.04
Table 3. Assay results, Drillhole SPT17
Drillhole: SPT17
From To Ag (oz/t) Ag (g/t) % Zn % Pb % Cu Au (g/t) Ga (g/t) In (g/t) % Fe
0 1 1.68 52.40 0.66 0.83 0.04 0.05 59.51 19.24 24.82
1 2 1.44 44.80 1.02 0.66 0.03 0.04 42.67 18.80 26.25
2 3 1.53 47.56 1.10 0.54 0.02 0.03 43.34 23.17 28.67
3 4 1.56 48.44 1.11 0.55 0.02 0.03 38.01 20.88 29.03
4 5 1.51 46.88 1.00 0.43 0.02 0.03 25.56 15.35 34.77
5 6 2.28 70.99 2.13 0.68 0.05 0.03 27.52 21.45 32.89
6 7 1.98 61.52 1.91 0.61 0.04 0.03 21.96 19.52 34.53
7 8 2.12 65.90 2.25 0.64 0.05 0.04 16.12 20.98 34.80
8 9 1.97 61.33 1.82 0.64 0.06 0.03 30.68 17.38 32.67
9 10 1.90 59.17 1.57 0.63 0.06 0.03 29.60 16.23 29.74
10 11 2.34 72.93 1.80 0.63 0.07 0.03 26.40 19.80 32.90
11 12 1.70 52.82 1.28 0.77 0.07 0.03 36.20 16.34 29.62
12 13 1.64 50.88 1.59 0.94 0.11 0.09 33.92 18.63 31.78
13 14 1.70 52.93 1.31 1.07 0.08 0.06 38.92 18.37 31.94
14 15 1.79 55.63 1.33 1.06 0.09 0.06 38.68 17.85 32.40
15 16 1.69 52.63 1.36 0.82 0.11 0.11 34.08 17.10 32.58
16 17 1.57 48.79 1.42 0.87 0.09 0.08 32.36 17.52 32.48
17 18 1.48 45.93 1.55 0.65 0.13 0.17 23.04 15.66 29.13
18 19 1.65 51.22 1.67 0.54 0.21 0.31 18.64 16.12 29.31
19 20 1.69 52.63 1.82 0.58 0.21 0.29 17.08 16.62 32.14
20 21 1.72 53.65 1.75 0.59 0.18 0.26 17.67 15.19 32.91
Mean 1.76 54.71 1.50 0.70 0.08 0.09 31.05 18.20 31.21
Table 4. Assay results, Drillhole SPT18
Drillhole: SPT18
From To Ag (oz/t) Ag (g/t) % Zn % Pb % Cu Au (g/t) Ga (g/t) In (g/t) % Fe
0 1 1.78 55.48 0.49 0.97 0.06 0.05 56.41 25.37 24.11
1 2 1.38 43.04 1.23 0.69 0.03 0.04 33.47 8.12 25.69
2 3 1.51 46.88 0.90 0.57 0.03 0.04 36.46 18.77 27.38
3 4 1.42 44.20 0.97 0.49 0.03 0.03 26.12 19.45 27.47
4 5 1.59 49.36 0.99 0.43 0.03 0.03 22.26 16.92 29.00
5 6 1.67 51.80 1.06 0.49 0.03 0.03 24.57 16.52 32.89
6 7 1.67 51.80 1.01 0.46 0.03 0.03 13.31 16.40 33.00
7 8 1.75 54.36 1.09 0.52 0.04 0.03 18.77 17.00 29.46
8 9 1.89 58.68 1.16 0.52 0.04 0.03 26.46 16.84 29.24
9 10 1.80 55.92 1.38 0.61 0.05 0.03 26.80 18.59 28.86
10 11 1.77 55.12 1.36 0.64 0.05 0.03 26.00 17.30 27.85
11 12 1.73 53.76 1.29 0.69 0.06 0.03 29.61 18.37 27.47
12 13 1.64 51.12 1.25 0.58 0.05 0.03 29.06 16.50 25.40
13 14 1.82 56.56 1.51 1.46 0.09 0.06 52.96 6.08 26.74
14 15 1.61 50.08 1.49 0.95 0.07 0.06 40.19 20.92 26.35
15 16 1.54 47.88 1.25 0.82 0.07 0.07 35.53 16.91 29.24
16 17 1.48 45.92 1.50 0.79 0.10 0.11 27.47 20.32 28.26
17 18 1.28 39.92 1.43 0.59 0.13 0.14 22.01 17.35 26.22
18 19 1.44 44.72 1.60 0.64 0.12 0.11 23.31 17.88 27.39
19 20 1.53 47.64 1.90 0.51 0.21 0.28 24.32 18.86 25.26
20 21 1.58 49.08 1.71 0.48 0.21 0.37 21.42 17.24 26.71
21 22 1.69 52.64 2.18 0.46 0.26 0.44 21.34 20.59 27.16
Mean 1.62 50.27 1.31 0.65 0.08 0.09 28.99 17.38 27.78
Table 5. Assay results, Drillhole SPT34
Drillhole: SPT34
From To Ag (oz/t) Ag (g/t) % Zn % Pb % Cu Au (g/t) Ga (g/t) In (g/t) % Fe
0 1 2.71 84.41 0.30 2.04 0.03 0.06 128.00 24.12 21.64
1 2 1.75 54.57 0.94 0.97 0.03 0.04 63.00 21.52 27.33
2 3 1.32 41.10 0.93 0.58 0.02 0.03 43.47 20.40 30.46
3 4 1.05 32.51 0.82 0.38 0.02 0.03 27.09 15.27 29.85
4 5 2.44 75.78 3.30 0.76 0.04 0.03 15.75 17.88 31.34
5 6 2.31 71.90 2.80 0.59 0.04 0.02 34.42 24.52 27.87
6 7 2.29 71.33 3.08 0.66 0.05 0.03 21.31 23.60 29.48
7 8 2.42 75.24 2.34 0.61 0.05 0.03 17.61 23.70 33.24
8 9 1.94 60.31 2.20 0.57 0.05 0.04 19.22 19.51 29.45
9 10 2.06 64.07 2.10 0.68 0.05 0.04 19.04 17.73 32.91
10 11 1.90 59.17 1.97 0.59 0.05 0.05 13.62 18.62 32.34
11 12 1.90 59.01 2.10 0.59 0.05 0.04 18.87 17.44 30.97
12 13 1.66 51.76 1.54 0.52 0.05 0.06 17.69 14.32 32.26
13 14 1.35 42.07 1.29 0.49 0.05 0.08 15.44 13.44 32.72
14 15 1.23 38.38 1.16 0.50 0.06 0.09 14.82 12.42 32.30
Mean 1.89 58.77 1.79 0.70 0.04 0.04 31.29 18.97 30.28
Table 6. Assay results, Drillhole SPT37
Drillhole: SPT37
From To Ag (oz/t) Ag (g/t) % Zn % Pb % Cu Au (g/t) Ga (g/t) In (g/t) % Fe
0 1 2.10 65.28 0.32 1.19 0.03 0.06 88.75 24.67 22.97
1 2 1.68 52.40 1.01 1.14 0.04 0.04 76.10 15.40 24.98
2 3 1.44 44.92 0.82 0.91 0.05 0.03 85.43 21.28 25.69
3 4 1.24 38.56 0.87 0.58 0.03 0.03 65.39 22.64 28.13
4 5 1.20 37.24 0.91 0.52 0.03 0.03 47.59 19.80 28.30
5 6 1.64 51.08 1.28 0.64 0.04 0.03 43.68 21.74 28.85
6 7 2.14 66.68 1.78 0.73 0.06 0.03 35.83 23.99 33.40
7 8 1.65 51.24 1.49 0.73 0.06 0.03 47.08 22.20 27.58
8 9 1.86 57.96 1.48 0.67 0.06 0.03 46.20 22.10 28.60
9 10 1.75 54.44 1.60 0.61 0.05 0.03 35.95 22.21 27.56
10 11 1.60 49.68 1.46 0.52 0.04 0.04 21.17 15.87 27.43
11 12 1.88 58.48 1.55 1.41 0.10 0.05 55.65 18.16 29.81
12 13 1.69 52.56 1.30 0.87 0.07 0.06 33.85 18.31 32.67
13 14 1.65 51.44 1.50 1.21 0.09 0.07 40.40 24.24 29.58
14 15 1.91 59.28 1.73 1.89 0.16 0.08 73.21 24.24 28.20
15 16 1.47 45.72 1.66 1.17 0.10 0.08 38.35 23.38 29.19
16 17 1.29 40.20 1.33 0.71 0.11 0.11 29.02 20.41 28.08
17 18 1.03 31.96 1.00 0.55 0.09 0.07 23.06 15.42 23.71
Mean 1.62 50.51 1.28 0.89 0.07 0.05 49.26 20.89 28.04
Table 7. Assay results, Drillhole SPT38
Drillhole: SPT38
From To Ag (oz/t) Ag (g/t) % Zn % Pb % Cu Au (g/t) Ga (g/t) In (g/t) % Fe
0 1 2.14 66.60 0.22 2.29 0.01 0.06 128.00 24.22 13.78
1 2 1.73 53.92 1.05 1.52 0.05 0.04 111.00 20.00 25.10
2 3 1.44 44.68 1.00 0.93 0.03 0.04 95.17 21.24 27.03
3 4 1.10 34.24 0.94 0.55 0.03 0.03 61.99 24.58 28.40
4 5 1.03 31.96 1.08 0.69 0.04 0.03 68.59 16.96 26.14
5 6 1.79 55.67 1.55 0.87 0.05 0.02 83.54 23.66 29.22
6 7 1.80 55.90 1.50 0.69 0.06 0.03 50.74 20.13 29.59
7 8 1.79 55.74 1.50 0.66 0.06 0.03 33.52 18.14 31.56
8 9 2.35 73.12 2.12 0.85 0.06 0.03 36.12 22.81 33.61
9 10 1.83 57.00 1.69 0.70 0.05 0.03 37.25 18.60 32.03
10 11 1.63 50.80 1.33 0.83 0.06 0.04 39.14 16.77 30.42
11 12 1.53 47.57 1.28 0.80 0.06 0.06 33.60 14.76 30.22
12 13 1.75 54.30 1.56 1.19 0.08 0.05 40.45 20.28 30.21
13 14 1.87 58.10 1.97 1.62 0.11 0.07 60.10 17.96 31.12
14 15 1.45 45.10 1.54 0.92 0.11 0.09 37.67 21.84 31.83
15 16 1.41 43.88 1.68 0.90 0.07 0.07 33.56 16.79 32.02
16 17 1.40 43.55 3.12 0.75 0.08 0.09 27.68 18.49 22.21
17 18 1.12 34.72 1.51 0.61 0.06 0.06 24.07 14.04 24.12
Mean 1.62 50.38 1.48 0.96 0.06 0.05 55.68 19.52 28.26
Drill Program
CDPR engaged Ingetrol Comercial S.A.C., a subsidiary of Grupo Ingetrol (Chile), and ConeTec
Peru, a subsidiary of the ConeTec Group (Canada). The campaign utilizes percussion and
sonic drilling techniques to ensure the most accurate results.
On October 23rd, the Company completed the last of 40 drill holes, ahead of the rainy season,
collecting more than 1,000 samples over a significant portion of the Quiulacocha tailings
deposit. The samples were safely transported to the laboratory in freezer containers and are
currently being analyzed.
Laboratory Testing
All samples are stored and transported to Lima in freezer containers to prevent oxidation and
preserve sample integrity.
The samples are dried and tested at the Inspectorate Services Lab (Bureau Veritas) in Lima.
Following geochemical and mineralogical testing, representative composites from select
samples will be sent for an advanced metallurgical test work program.
The assay results are derived from a combination of multi-element ICP (detecting 60 elements),
Atomic Absorption (for determining upper limits of the metals Zn, Pb, and Cu), and Fire Assay
for Au.
Quality Assurance (QA) and Quality Control (QC)
The preparation of samples for Geochemical Analyses comprises drying at 100°C and riffle
splitting to obtain a representative pulp sample of 250 grams. The sample does not undergo
sieving or any other mechanical preparation (crushing or grinding) to preserve the original
grain size distribution.
Bureau Veritas performs all sample preparation and analytical programs, supported by the
QA/QC program, which is monitored on a sample lot basis. The CDPR QA/QC program
consists of inserting twin samples, coarse duplicate samples, pulp duplicate samples, standard
reference materials, and coarse blank material and further checking at a second laboratory.
Geophysics
CDPR has successfully completed Phase 1 of its geophysical studies, focusing on the dry areas
of the Quiulacocha Tailings. Depth readings, conducted by Geomain Ingenieros S.A.C., ranged
from 20 to over 40 meters in various locations.
The Quiulacocha T ailings
CDPR is the titleholder of the concession “El Metalurgista” in Peru, which grants it the right to
explore and exploit the Quiulacocha Tailings within its assigned area. The General Mining
Bureau of the Peruvian Ministry of Energy and Mines has formally confirmed the enforceability
of these rights.
The Quiulacocha Tailings Storage Facility covers approximately 115 hectares and is estimated
to hold approximately 75 million tonnes of material processed from the 1920s to 1990s.
Initially, these tailings resulted from the mining of 16+ million tonnes of copper -silver-gold
mineralization with reported historical grades of up to 10% Cu, 4 g/t Au, and over 300 g/t Ag,
and later from the mining of 58+ million tonnes of zinc -lead-silver mineralized material with
average historical grades of 7.41% Zn, 2.77% Pb, and 90.33 g/t Ag.
With minimal mining costs due to surface-level material and current reprocessing capacity at
adjacent plants, CDPR's Quiulacocha Project stands out as one of Peru's key mining initiatives.
This project provides economic benefits and aims to restore the environment and create
employment opportunities, aligning with the local community's needs.
Technical Information
Mr. Alfonso Palacio Castilla, MIMMM/Chartered Engineer (CEng) and Project Superintendent
for CDPR, has reviewed and approved the scientific and technical information contained in this
news release. Mr. Palacio is a Qualified Person for the purposes of repo rting in compliance
with NI 43-101.
Cerro de Pasco Resources
Cerro de Pasco Resources Inc. is focused on the development of its principal 100% owned
asset, the El Metalurgista mining concession, comprising silver -rich mineral tailings and
stockpiles extracted over a century of operation from the Cerro de Pasco open pit mine in
Central Peru. The company’s approach at El Metalurgista entails the reprocessing and
environmental remediation of mining waste and the creation of numerous opportunities in a
circular economy. The asset is one of the world’s largest above-ground resources.
Forward-Looking Statements and Disclaimer
Certain information contained herein may constitute “forward -looking information” under
Canadian securities legislation. Generally, forward-looking information can be identified using
forward-looking terminology such as “plans”, “seeks”, “expects”, “estima tes”, “intends”,
“anticipates”, “believes”, “could”, “might”, “likely” or variations of such words, or statements
that certain actions, events or results “may”, “will”, “could”, “would”, “might”, “will be taken”,
“occur”, “be achieved” or other similar expressions.
Forward-looking statements, including the expectations of CDPR’s management regarding the
realization, timing and scope of its drilling program, the completion of a resource report as well
as the business and the expansion and growth of CDPR’s operations, are based on CDPR’s
estimates and are subject to known and unknown risks, uncertainties and other factors that
may cause the actual results, level of activity, performance or achievements of CDPR to be
materially different from those expressed or implied b y such forward -looking statements or
forward-looking information.
Forward-looking statements are subject to business and economic factors and uncertainties
and other factors, that could cause actual results to differ materially from these forward-looking
statements, including the relevant assumptions and risks factors se t out in CDPR’s public
documents, available on SEDAR+ at www.sedarplus.ca. There can be no assurance that such
statements will prove to be accurate, as actual results and future events could differ materially
from those anticipated in such statements. Although CDPR believes that the assumptions and
factors used in preparing the forward-looking statements are reasonable, undue reliance
should not be placed on these statements and forward -looking information. Except where
required by applicable law, CDPR disclaims any intention or obligation to update or revise any
forward-looking statement, whether as a result of new information, future events or otherwise.
Further Information
Guy Goulet, CEO
Telephone: +1-579-476-7000
Mobile: +1-514-294-7000