Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

CD.V ·

Cantex Announces Drill Results of Massive Sulphide Zone on North Rackla Claims, Yukon

Drill Results

Cantex Announces Drill Results of Massive Sulphide Zone on North Rackla Claims, Yukon

KELOWNA, BC,

April 7, 2017

/CNW/ -

Cantex Mine Development Corp.

(CD: TSXV) (the "Company") is pleased to report results from all eight core holes

drilled in late 2016 testing an oxidized massive sulphide zone that has been traced for at least 1,900 metres with surface sampling.

All eight holes intersected the oxidized massive sulphide zone. The first seven holes were collared at the same location while the eighth hole was collared 97

metres to the northeast. Selected results are presented in the following table:

Core

Hole

#

Azimuth

Inclination

From

(m)

To

(m)

Length

(m)

Ag

(g/t)

Cu

(%)

Pb

(%)

Zn

(%)

Mn

(%)

1

148

o

-45

o

13.7

43.1

17.5

43.6

3.8

5.4

15.7

21.4

0.04

0.01

0.48

2.67

2.90

2.68

3.63

3.02

2

148

o

-55

o

18.0

74.0

20.2

74.5

2.2

0.5

59.9

20.0

0.35

0.01

0.31

2.62

0.96

2.34

3.23

0.23

3

148

o

-70

o

Including

and

23.4

24.8

25.15

53.9

29.0

25.15

26.0

54.1

5.6

0.35

0.85

0.2

214.3

242.0

1040.0

31.0

0.70

0.22

3.60

0.04

2.22

29.66

0.78

3.20

1.11

2.49

1.00

8.65

3.39

2.80

2.96

4.03

4

129

o

-55

o

19.7

73.8

21.0

74.2

1.3

0.4

90.0

10.6

0.88

0.01

1.21

1.23

0.61

4.71

2.26

2.65

5

129

o

-70

o

Including

24.0

26.6

57.0

28.6

27.6

59.0

4.6

1.0

2.0

101.7

402.0

40.0

0.32

1.28

0.04

2.38

8.91

4.41

1.35

4.20

2.72

2.85

2.50

3.18

6

129

o

-80

o

Including

Including

22.95

33.0

36.9

43.7

44.8

27

38.7

37.6

48.1

45.8

4.05

5.7

0.7

4.4

1.0

21.1

136.9

432.0

48.9

90.6

0.02

0.37

0.75

0.02

0.02

2.12

2.80

21.56

5.35

10.20

1.79

0.83

1.92

5.99

9.42

4.24

3.05

2.76

4.97

4.50

7

163

o

-70

o

Including

25.0

26.8

51.6

109.4

118.0

28.5

28.5

52.85

110.2

118.6

3.5

1.7

1.3

0.8

0.6

119.4

161.2

258.0

13.2

11.0

0.18

0.25

0.62

0.01

0.01

7.60

15.39

4.29

2.21

1.91

2.23

4.13

7.63

5.39

5.38

3.17

2.86

1.96

1.29

1.48

8

162

o

-50

o

51.0

133.6

151.0

53.5

134.7

151.8

2.5

1.1

0.8

131.4

19.9

6.5

0.73

0.06

0.01

0.74

1.32

0.26

0.66

1.17

7.16

2.45

1.22

0.32

Following logging the core was split, with half being retained for future reference. The other half of the core was crushed and pulverized at CF Mineral Research

Ltd. in

Kelowna, BC

prior to a representative split being sent to ALS Chemex Ltd in

North Vancouver, BC

for analysis. All samples were assayed using the ME-

MS61 technique. Where the assays exceeded the upper limit of the ME-MS61 technique the relevant OG62 technique was used. Where lead analyses

exceeded the 20 percent upper limit of OG62 the Pb-VOL70 technique was used.

Cantex is encouraged by the high grade nature of many of the intercepts, with silver values up to 1,040 g/t, copper up to 3.60%, lead up to 29.66%, and zinc up to

9.42%.

"The high manganese values, up to 4.97%, associated with the massive sulphide mineralization is consistent with the mineralization being emplaced either as a

fault-controlled polymetallic vein system or possibly as sulphide feeder zones related to vent mineralization along submarine faults," commented consulting

geologist Dr.

Trygve Hoy

. "Further work, including drilling along strike and to deeper levels into primary sulphide mineralization, will help to further evaluate and

test these models, and to better define the extent of mineralization along the 1,900+ metre fault controlled oxidized massive sulphide zone." Drilling along strike

in areas of anomalous copper and silver may assist in discovering any feeder vents present where higher grades of mineralization would be anticipated.

A map illustrating the positions of all the foregoing holes is available on our website at

www.cantex.ca

.

This summer Cantex intends to complete sampling and core drilling on the North Rackla claims, including on the high priority gold targets. A HQ core drill and a

Rotary Air Blast drill were left on site to accomplish these objectives.

The technical information and results reported here have been reviewed by Mr.

Chad Ulansky P.Geol

., a Qualified Person under National Instrument 43-101, who

is responsible for the technical content of this release.

Signed,

Charles Fipke

Charles Fipke

Chairman

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility

for the adequacy or accuracy of this release.

SOURCE

Cantex Mine Development Corp.

To view the original version on PR Newswire, visit: http://www.newswire.ca/en/releases/archive/April2017/07/c1076.html

%SEDAR: 00010333E

For further information:

Cantex Mine Development Corp, Tel: +250-860-8582; Email: [email protected]

CO: Cantex Mine Development Corp.

CNW 09:00e 07-APR-17