C3 Metals Intersects Broad Zones of Gold Mineralization in First Drill Holes at Super Block Project, Jamaica
C3 Metals Intersects Broad Zones of Gold
Mineralization in First Drill Holes at Super
Block Project, Jamaica
Toronto, Ontario--(Newsfile Corp. - September 29, 2025) -
C3 Metals Inc.
(TSXV: CCCM) (OTCQB:
CUAUF) ("C3 Metals" or the "Company") is pleased to announce it has intersected gold mineralization
in the first four scout holes drilled at its 50%-owned Super Block project (Figure 1), a joint venture with
Geophysx Jamaica Limited ("Geophysx") (see press release dated March 1, 2024).
Figure 1: Map showing the Super Block project area in relation to C3 Metals' Bellas Gate project.
Note
the locations of the past producing Pennants Gold Mine and the DHZ, PEZ and LVZ epithermal gold-
silver prospects.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2661/268198_91afe692348c9a5f_001full.jpg
The first four holes drilled at Super Block were from the same drill pad location in the eastern PEZ area
approximately 1.8km from the past producing Pennants Gold Mine (Figure 2).
Drilling intersected broad
zones of gold mineralization associated with suspected adularia alteration in fault zones and irregular
veinlets of carbonate, quartz, pyrite and zeolite.
The gold mineralization is interpreted as structurally
controlled, low sulphidation epithermal style.
Figure 2: Airborne radiometric image showing a 5km (northwest-southeast oriented) potassium anomaly
coincident with strong gold in soils that extends from DHZ through the former Pennants Mine to PEZ
prospect.
Note the location of the first four drill holes at the eastern end of the 5km gold trend.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2661/268198_91afe692348c9a5f_002full.jpg
Dan Symons, President and CEO, stated
, "The Super Block project consists of a 5km gold trend
identified by geochemical and coincident geophysical data.
The first four drill holes of our maiden
program were collared from the same drill pad location on the eastern end of this trend 1.8km to the
southeast of the past producing Pennants Gold Mine.
The fact that we have encountered gold
mineralization in all the first four holes is highly encouraging.
Gold mineralization was successfully
intercepted in the target structural position in each of the first four holes. We will now evaluate the
alteration styles and geochemical signatures in each hole with the aim of vectoring into higher grades.
To intersect broad zones of gold mineralization in each of the first four scout holes 1.8km away from a
past producing mine is very promising and indicative of a potentially large epithermal system."
Super Block Project Drilling Highlights:
Drilling has initially targeted the Pennants East Zone ("PEZ"), where gold is highly anomalous in
soils and coincides with a 1.5km east-west trending radiometric (potassium) anomaly.
Four holes were completed at the eastern end of PEZ, and all holes intercepted gold
mineralization hosted by epithermal style veins, stockworks and fault zones.
Drilling at PEZ confirms the presence of multiple zones of epithermal veinlets within a broader
mineralized envelope.
Mineralization remains open at depth and along strike.
The Company plans to continue to test high priority targets at Super Block with a further 10 scout
holes along the 5km gold trend.
Select assay results from the first four scout diamond drill holes are presented in Table 1 below:
Table 1: Select Assay Results from the First Four Scout Holes at the Super Block Project
1,2
Hole
ID
From
(m)
To
(m)
Length
(m)
Au
(g/t)
SUP4025-001
52.85
76.65
23.80
0.51
SUP4025-001
81.00
83.00
2.00
0.40
SUP4025-001
96.40
100.90
4.50
0.37
SUP4025-001
112.70
123.00
10.30
1.23
SUP4025-002
125.55
128.00
2.45
0.38
SUP4025-002
133.00
133.50
0.50
1.82
SUP4025-002
157.50
165.00
7.50
0.52
SUP4025-002
169.75
180.00
10.25
0.31
SUP4025-002
183.00
187.00
4.00
0.32
SUP4025-002
193.00
197.50
4.50
0.30
SUP4025-002
201.00
217.00
16.00
0.44
SUP4025-003
62.00
67.00
5.00
1.17
SUP4025-003
70.00
81.50
11.50
0.58
SUP4025-003
94.50
95.50
1.00
2.48
SUP4025-003
114.40
120.00
5.60
0.94
SUP4025-004
118.80
121.80
3.00
0.71
SUP4025-004
124.80
127.00
2.20
0.60
SUP4025-004
131.50
141.00
9.50
0.38
SUP4025-004
151.00
152.50
1.50
1.77
1
A nominal cut-off of 0.2g/t gold is used for the reporting of potentially significant intercepts.
Maximum contiguous dilution within each intercept is 2.5m. Samples have been composited to one and maximum two metre lengths.
Whole core
sampled in drill intervals with less than 30% recovery, to maximize sample.
2
All intervals are reported as core lengths, as true widths of the mineralized intervals are unknown at this time.
The PEZ zone (Figure 3) is hosted within the Main Ridge Formation, a Cretaceous-aged volcanic inlier
in central Jamaica.
This contains basalts and andesites with alternating volcaniclastic breccias, lapilli
tuffs and ash tuffs, with basaltic to intermediate dikes.
Locally, rocks encountered during drilling at the
PEZ zone consists of andesites, porphyritic andesites, polymictic volcaniclastic conglomerates to
breccias with fine-grained tuffaceous to porphyritic matrix, fine-grained crystal tuffs, and abundant fault
zones with gouge and brecciation.
At PEZ, gold is highly anomalous in soils and coincides with a 1.5km east-west trending radiometric
(potassium) anomaly (Figure 3).
Drilling has defined mineralization in broad 40m to 90m wide zones (not
true width) that contain strongly anomalous gold over wide intervals (e.g.,
23.80m at 0.51 g/t Au
in
SUP4025-001
from 52.85m to 76.65m, and
10.25m at 1.23 g/t Au
in SUP4025-001 from 112.70m to
123.00m), and locally higher grades (up to
2.48 g/t Au
in SUP4025-003 within 1.00m from 94.50m to
95.50m), as well as anomalous silver (Figure 4).
The mineralized zones roughly correlate to form a
northwest-striking, sub-vertical trend.
Alteration of the host rocks show subtle to strong discolouration
and is suspected to be a mixture of illite, smectite, carbonate, silica, leucoxene and adularia.
A
potassium enrichment is likewise seen in the geochemistry which is attributed to be due to subtle
adularia alteration. Pyrite contents increase within these broad gold mineralized zones.
Within the
mineralized gold zones are increased abundance of thin, irregular veinlets which are a mixture of
carbonate, quartz, pyrite and zeolite.
Faults are locally abundant within the mineralized zones, and
contain clay gouge, pyrite and fragments of veinlets.
Initial interpretations are that this style of mineralization is akin to low-sulfidation epithermal gold-silver,
as is the current interpretation of the former Pennants Gold Mine.
Likewise, similar style of veining,
structure and alteration are seen at PEZ compared to Pennants.
Therefore, this could be part of a similar
large structural zone which may have high-grade centres as seen at Pennants.
Figure 3: Zoomed in image showing the 1.5km PEZ prospect at the eastern end of the identified 5km
gold trend. Gold geochemistry in soils is shown with a coincident radiometric anomaly.
The former
Pennants Mine is approximately 1.8km northwest from the PEZ prospect.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2661/268198_91afe692348c9a5f_003full.jpg
Figure 4: Cross section through drill holes SUP4025-001 and 002 showing gold mineralization.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2661/268198_91afe692348c9a5f_004full.jpg
Next Steps
The host of gold mineralization at PEZ remains enigmatic.
Petrographic and spectrometer studies are
planned to identify and map the mineral and alteration associations along the 5km gold anomalous
trend.
The initial Phase 1 scout diamond drilling program will continue through 2025 with 14 holes and 2,500m
designed to drill test compelling gold and coincident radiometric anomalies at PEZ, the former Pennants
Mine and DHZ.
To date, six holes have been completed for approximately 1,020m and a seventh hole is
in progress.
For additional information, contact:
Dan Symons
President and CEO
+1 416 716 6466
ABOUT C3 METALS INC.
C3 Metals Inc. is a mineral exploration company focused on creating substantive value for its
shareholders through the discovery and development of large copper and gold deposits.
The Company
holds approximately 30,000 hectares located in the prolific high-grade Andahuaylas-Yauri Porphyry-
Skarn belt of Southern Peru.
Mineralization at Jasperoide is hosted in a similar geological setting to the
nearby major mining operations at Las Bambas (MMG), Constancia (Hudbay) and Antapaccay
(Glencore).
At Jasperoide, the Company has identified over 15 skarn prospects and an outcropping
porphyry system over two parallel 28km belts.
The Company has published a maiden resource estimate
on the first of these skarn targets, which contained Measured & Indicated Resources of 52Mt at 0.5%
copper and 0.2 g/t gold
[1]
.
The Company is also actively exploring in Jamaica where it has identified 16
porphyry, 40 epithermal and multiple volcanic redbed copper prospects over a 30km strike extent.
The
Company holds a 100% interest in 17,855 hectares of exploration licenses and a 50% interest in 9,870
hectares in a joint venture with Geophsyx Jamaica Ltd, the largest mineral tenure holder in the country.
Barrick Gold Corp. announced on May 1, 2024 that it had entered into an earn-in agreement with
Geophysx Jamaica Ltd. on approximately 400,000 hectares of exploration licenses, several of which
surround C3 Metals' mineral concessions.
Mining is currently the second largest industry in Jamaica, and
historical mining dates back to the colonial eras of the 1500s (Spanish) and 1800s (British).
Related Link:
www.c3metals.com
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this
release.
QP Statement
Stephen Hughes, P.Geo. is Vice President Exploration and a Director for C3 Metals and is a Qualified
Person as defined by National Instrument 43-101.
Mr. Hughes has reviewed the technical information in
this news release and approves the written disclosure contained herein.
Technical Program
C3 Metals adheres to a strict QA/QC protocol for handling, sampling, sample transportation and
analyses.
Chain-of-custody protocols are designed to ensure security of samples until their delivery at
the laboratory.
Samples were cut at C3 Metals' operations base in Bellas Gate, St Catherine, Jamaica by Company
personnel. Diamond drill core was sampled in maximum 1-metre intervals in mineralized zones and
maximum 2 metres in unmineralized intervals by geological log, stopping at geological boundaries and
changing of core size, and using a rock saw.
Core diameter is a mix of HQ and NQ depending on the
depth of the drill hole.
Samples were bagged, tagged and packaged for shipment by DHL air freight
service to the ALS preparation laboratory in Sudbury, Ontario, Canada where entire samples were
crushed to 70% passing 10 mesh (2mm), and a 250g split was pulverized to 85% passing 200 mesh
(75µm).
The prepared samples were sent to the ALS assay laboratories in Vancouver, Canada for copper, gold
and silver assays, and multi-element ICP. ALS is an accredited laboratory which is independent of the
Company. Gold assays were by fire assay fusion with AAS finish on a 30g sample and the overlimit gold
assay was completed by fire assay and gravimetric finish on 30g sample.
Copper and silver were
assayed by ICP-MS following a 4-acid digestion on the ME-MS61 package for a suite of 48 elements
and the over limit copper by 4-Acid digestion and assayed by ICP-AES on each sample with copper
greater than 10000ppm (1%). Copper and gold standards as well as blanks and duplicates (coarse
crush split) were randomly inserted into the sampling sequence for quality control. On average, 10% of
the submitted samples are quality control samples. Nuggety gold is indicated from some coarse
duplicate re-assay. No data quality problems were indicated by the QA/QC program.
Caution Regarding Forward Looking Statements
Certain statements contained in this press release constitute forward-looking information. These
statements relate to future events or future performance. The use of any of the words "could", "intend",
"expect", "believe", "will", "projected", "estimated" and similar expressions and statements relating to
matters that are not historical facts are intended to identify forward-looking information and are based on
the Company's current belief or assumptions as to the outcome and timing of such future events. Actual
future results may differ materially. In particular, this release contains forward-looking information relating
to, among other things, the exploration operations of the Company. Those assumptions and factors are
based on information currently available to the Company.
Although such statements are based on
reasonable assumptions of the Company's management, there can be no assurance that any
conclusions or forecasts will prove to be accurate.
While the Company considers these assumptions to be reasonable based on information currently
available, they may prove to be incorrect. Forward looking information involves known and unknown
risks, uncertainties and other factors which may cause the actual results, performance or achievements
to be materially different from any future results, performance or achievements expressed or implied by
the forward-looking information. Such factors include risks inherent in the exploration and development of
mineral deposits, including risks relating to changes in project parameters as plans continue to be
redefined, risks relating to variations in grade or recovery rates, risks relating to changes in mineral
prices and the worldwide demand for and supply of minerals, risks related to increased competition and
current global financial conditions, access and supply risks, reliance on key personnel, operational risks,
and regulatory risks, including risks relating to the acquisition of the necessary licenses and permits,
financing, capitalization and liquidity risks.
The forward-looking information contained in this release is made as of the date hereof, and the
Company is not obligated to update or revise any forward-looking information, whether as a result of new
information, future events or otherwise, except as required by applicable securities laws. Because of the
risks, uncertainties and assumptions contained herein, investors should not place undue reliance on
forward-looking information. The foregoing statements expressly qualify any forward-looking information
contained herein.
1
Based on the assumptions and parameters outlined in the NI 43-101 Technical Report titled Jasperoide Copper-Gold Project Cusco Region, Peru
dated July 5, 2023.
To view the source version of this press release, please visit
https://www.newsfilecorp.com/release/268198