Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

CBR.V ·

Surface Oxidized Material at Central Gold Deposit, Cuiú Cuiú Gold District, Brazil

Drill Results

Cabral Gold Drills 28m @ 1.2 g/t Gold in Near-

Surface Oxidized Material at Central Gold

Deposit, Cuiú Cuiú Gold District, Brazil

Vancouver, British Columbia--(Newsfile Corp. - December 14, 2023) -

Cabral Gold Inc. (TSXV: CBR)

(OTC Pink: CBGZF) ("Cabral" or the

"

Company

") is pleased to announce drill results from an

additional ten RC holes from the Central gold deposit that are part of the ongoing drill program currently

being conducted at both the Central and MG gold deposits within the Cuiú Cuiú gold district in northern

Brazil.

Highlights

Notable drill intercepts from the ten RC holes delineating the Central gold-in oxide blanket and

basement saprolite include RC365 which returned

28m @ 1.2 g/t gold

from 29m depth in

saprolite, including

2m @ 6.5 g/t gold

RC367 returned

35m @ 0.8 g/t gold

from 35m depth in saprolite including

10m @ 1.1 g/t gold

RC366 was drilled on the same section as RC367 and returned

30m @ 0.6 g/t gold

from 21m

depth in saprolite including

8m @ 1.4 g/t gold,

and intersected

8m @ 1.7 g/t gold

from 56m

RC359 returned

7m @ 2.3 g/t gold

from 32m depth in saprolite including

1m @ 12.8 g/t gold

Alan Carter, Cabral's President and CEO commented, "These drill results from the near-surface gold-

in-oxide blanket and saprolite material at the Central gold deposit further demonstrate the presence

and continuity of higher-grade material located near surface. These results continue to bode well for

the optimization of the resource model of the known gold-in-oxide resources at Cuiú Cuiú during the

coming months."

Central RC Drill Results

The Central gold deposit is one of the two main gold deposits identified to date at Cuiú Cuiú. As with the

nearby MG gold deposit, the upper portion of the Central gold deposit is extensively weathered resulting

in a vertical profile of approximately 60m on average of highly weathered basement saprolite. The

weathered mineralized basement saprolite is overlain by mud, soil and colluvium material which forms a

blanket. All of the blanket material contains gold and is derived from the chemical and physical

weathering the underlying saprolite basement gold mineralization.

Whilst, the bulk of the gold resources at Central are contained within the underlying primary (un-

weathered) basement material (see the NI 43-101 report dated effective July 31, 2022), the overlying

oxide material currently contains Indicated Resources of 3.49Mt @ 0.6 g/t (65,400oz) and Inferred

Resources of 3.36Mt @ 0.4 g/t (44,800oz). A significant amount of higher-grade material (greater than

1.75g/t gold) is contained within these resources and the current drill program at Central is designed to

expand and delimit these resources within the near-surface saprolite and blanket material.

Holes RC358 to RC367 were all drilled within the overall outline of the oxide resource at Central to a

maximum depth of 97m (Figure 1).

Figure 1: Map showing Central gold deposit with limits to oxide blanket and underlying mineralized

zones in weathered basement saprolite, existing RC and diamond-drill holes and new drill holes,

RC358 to RC367 with results. Previous holes RC350 to RC357 are also shown with results. Terms; g/t

= grams / tonne, m = metres

To view an enhanced version of this graphic, please visit:

https://images.newsfilecorp.com/files/3900/191026_6ca42ecf14440992_002full.jpg

Section N20995

Drill hole RC365 was drilled on section N20995 in the southern part of the Central deposit (Figures, 1

and 2, Table 1). The hole was designed to establish up-dip continuity of the higher-grade zone of

mineralization intersected in diamond hole DDH255 which previously returned 37m @ 1.3 g/t gold.

Hole RC365 intersected

28m @ 1.2 g/t gold

from 29m depth in saprolite, including

2m @ 6.5 g/t gold

from 30m depth. This zone is interpreted as the up-dip extension of the significant zone of mineralization

previously intercepted in weathered basement (saprolite) in DDH255, and historic hole, CC13, which cut

48.1m @ 4.5 g/t gold, providing excellent evidence of continuity in the near-surface oxide material. This

higher-grade zone has been traced to depth in the underlying un-weathered basement rocks. RC365

ended at 59m in gold-in-oxide mineralization within weathered basement (saprolite), with the last 2m

from 57m ending in mineralized material and averaging 1.2 g/t gold.

Figure 2: Section N20995 through the Central gold-in-oxide blanket and underlying oxidized saprolite

showing results from hole RC365. Note that the drill intercept of 28m @ 1.2 g/t gold is up-dip from the

intersection in diamond-drill hole DDH255 which returned 37m @ 1.3 g/t gold and that in diamond-

drill hole CC13, which cut 48.1m @ 4.5 g/t gold. Terms; g/t = grams / tonne, m = metres, ppm = parts

per million or grams / tonne

To view an enhanced version of this graphic, please visit:

https://images.newsfilecorp.com/files/3900/191026_6ca42ecf14440992_003full.jpg

Section N20945

Holes RC366 and RC367 were both drilled on section N20945 (Figures 1 and 3, Table 1).

RC367 was drilled from the north-east towards the south-west and returned

35m @ 0.8 g/t gold

from

35m depth in saprolite including

10m @ 1.1 g/t gold.

The hole also returned 4m @ 0.3 g/t from surface

in blanket sediments and 5m @ 0.5 g/t from 22m in saprolite. The intervening interval returned no

sample during drilling but based on previous results from DDH283 and DDH284, it is almost certainly

mineralized.

RC366 was drilled on the same section from the same platform as RC367 and returned

30m @ 0.6 g/t

gold

from 21m depth in saprolite including

8m @ 1.4 g/t gold.

The hole also intersected

8m @ 1.7 g/t

gold

at depth from 56m to the end of hole at 64m. As with hole RC367, no material was recovered in the

upper portion of the hole from 5 to 21m.

The two new holes add further confidence to the previous interpretation that mineralized zones extend

upward from un-weathered basement rocks through the weathered basement (saprolite).

Figure 3: Section N20945 through the Central gold-in-oxide blanket and underlying oxidized saprolite

showing existing diamond-drill holes DDH283 and DDH284 and CC34, as well as new RC holes

RC366 and RC367. Terms; g/t = grams / tonne, m = metres, ppm = parts per million or grams / tonne

To view an enhanced version of this graphic, please visit:

https://images.newsfilecorp.com/files/3900/191026_6ca42ecf14440992_004full.jpg

Section N21243

Holes RC358 and RC359 were both drilled on section N21243 (Figures 1 and 4, Table 1).

RC359 was

drilled from the south-west towards the north-east and intersected 7m @ 2.3 g/t gold from 32m depth

including 1m @ 12.8 g/t gold in saprolite material.

RC358 was drilled in the same direction as RC359 but was collared 50m to the north-east and cut

several zones of mineralization in saprolite material including 1m @ 4.8 g/t from 26m depth, 3m @ 1.3

g/t from 52m depth and 1m @ 2.0 g/t from 60m depth.

No previous drilling had been conducted on this section.

Figure 4: Section N21243 through the Central gold-in-oxide blanket and underlying oxidized saprolite

showing location of RC drill holes and results for RC358 and RC359. Results are pending on RC385

and RC396. No previous drilling was completed on this section. Terms; g/t = grams / tonne, m =

metres, ppm = parts per million or grams / tonne

To view an enhanced version of this graphic, please visit:

https://images.newsfilecorp.com/files/3900/191026_6ca42ecf14440992_005full.jpg

Drill Hole

Weathering

From

to

Width

Grade

#

m

m

m

g/t gold

RC0358

Blanket

Saprolite

26.0

27.0

1.0

4.8

52.0

55.0

3.0

1.3

60.0

61.0

1.0

2.0

EOH

80.0

RC0359

Blanket

Saprolite

32.0

39.0

7.0

2.3

incl.

33.0

34.0

1.0

12.8

EOH

81.0

RC0360

Blanket

0.0

4.0

4.0

0.4

EOH

84.5

RC0361

Blanket

0.0

3.0

3.0

0.4

Saprolite

21.0

22.0

1.0

2.2

EOH

71.0

RC0362

Blanket

N.S.V

EOH

74.0

RC0363

Blanket

0.0

4.0

4.0

0.9

EOH

88.0

RC0364

Blanket

0.0

4.0

4.0

0.6

Saprolite

27.0

32.0

5.0

0.7

EOH

47.0

RC0365

Blanket

0.0

6.0

6.0

0.2

Saprolite

29.0

57.0

28.0

1.2

incl.

30.0

32.0

2.0

6.5

Fresh Rock

57.0

59.0

2.0

1.2

EOH

59.0

RC0366

Blanket

0.0

5.0

5.0

0.6

5.0

21.0

No recovery

Saprolite

21.0

51.0

30.0

0.6

incl.

29.0

37.0

8.0

1.4

Fresh Rock

56.0

64.0

8.0

1.7

EOH

64.0

RC0367

Blanket

0.0

4.0

4.0

0.3

4.0

22.0

No recovery

Saprolite

22.0

27.0

5.0

0.5

35.0

70.0

35.0

0.8

Fresh Rock

incl.

50.0

60.0

10.0

1.1

EOH

97.0

Table 1: Drill results from near surface Central gold-in-oxide blanket / saprolite zone regarding holes

RC358 to RC367

These drill results, and those that are pending, will allow the generation of a more accurate resource

model of the oxide mineralization at Central and MG which will form the basis of a proposed mine plan

for trial mining. The prefeasibility study on trial mining of the gold-in-oxide resources will consider the

exploitation by open-pit mining and heap-leach processing.

Drilling at Cuiú Cuiú is ongoing with results still pending on 21 RC holes from Central and nine shallower

power-auger holes at MG. Results are also pending on 18 RC holes from the Machichie target, which is

located approximately 500m north of the MG gold deposit.

Term loan

Cabral also announces that the term loan with Dr. Alan Carter, President and CEO of the Company, has

been repaid in full with the exception of interest accrued from October 1, 2023 (see news release dated

March 7, 2023).

About Cabral Gold Inc.

The Company is a junior resource company engaged in the identification, exploration and development

of mineral properties, with a primary focus on gold properties located in Brazil. The Company has a

100% interest in the Cuiú Cuiú gold district located in the Tapajós Region, within the state of Pará in

northern Brazil. Two main gold deposits have so far been defined at the Cuiú Cuiú project which contains

National Instrument 43-101 compliant Indicated resources of 21.6Mt @ 0.87 g/t gold (604,000 oz) and

Inferred resources of 19.8Mt @ 0.84 g/t gold (534,500 oz) as per the 43-101 technical report dated

October 12, 2022.

The Tapajós Gold Province is the site of the largest gold rush in Brazil's history which according to the

ANM (Agência Nacional de Mineração or National Mining Agency of Brazil) produced an estimated 30

to 50 million ounces of placer gold between 1978 and 1995. Cuiú Cuiú was the largest area of placer

workings in the Tapajós and produced an estimated 2Moz of placer gold historically.

FOR FURTHER INFORMATION PLEASE CONTACT:

"Alan Carter"

President and Chief Executive Officer

Cabral Gold Inc.

Tel: 604.676.5660

Guillermo Hughes, MAusIMM and FAIG., a consultant to the Company as well as a Qualified Person

as defined by National Instrument 43-101, supervised the preparation of the technical information in

this news release.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as such term is defined in

the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this

release.

Forward-Looking Statements

This news release contains certain forward-looking information and forward-looking statements within

the meaning of applicable securities legislation (collectively "forward-looking statements").

The use of

the words "will", "expected" and similar expressions are intended to identify forward-looking

statements.

These statements involve known and unknown risks, uncertainties and other factors that

may cause actual results or events to differ materially from those anticipated in such forward-looking

statements.

Such forward-looking statements should not be unduly relied upon. The Company

believes the expectations reflected in those forward-looking statements are reasonable, but no

assurance can be given that these expectations will prove to be correct.

Notes

Gold analysis has been conducted by SGS method FAA505 (fire assay of 50g charge), with higher

grade samples checked by FAA525. Analytical quality is monitored by certified references and

blanks. Until dispatch, samples are stored under the supervision the Company's exploration office.

The samples are couriered to the assay laboratory using a commercial contractor. Pulps are returned

to the Company and archived. Drill holes results are quoted as down-hole length weighted

intersections.

To view the source version of this press release, please visit

https://www.newsfilecorp.com/release/191026