Buffalo Potash Announces Seismic Program and Assaying of Legacy Potash Drill Cores at Flagship Disley Project
BUFFALO POTASH ANNOUNCES SEISMIC PROGRAM AND
ASSAYING OF LEGACY POTASH DRILL CORES AT
FLAGSHIP DISLEY PROJECT
Highlights
• Planned 3D seismic program to commence over targeted segment of flagship Disley Project;
• Initiates re-assaying of two legacy potash drill cores on flagship Disley Project; and
• 3D seismic, new assays on historic wells, and 2026 drilling intended to inform an updated NI 43-
101-compliant Technical Report (“Technical Report”) and Preliminary Economic Assessment
(“PEA”)(1).
SASKATOON, Saskatchewan, February 10, 2026 – Buffalo Potash Corporation (TSXV: BUFF) (the
“Company” or “Buffalo”) is pleased to announce that it has contracted a 3D seismic program to begin at
its flagship Disley Project in Saskatchewan in the middle of February, 2026 and concurrently is undertaking
re-assaying of legacy potash drill cores from historical drill holes on the property. The work forms part of
the Company’s ongoing technical evaluation program and is intended to advance the project toward the
completion of a PEA(1), while improving Buffalo’s subsurface understanding to support future development
of its “Showcase” facility.
Mr. Steve Halabura P.Geo., Buffalo Chief Executive Officer, commented: “Buffalo’s Disley Project is not
only exceptional due to its location within Saskatchewan’s established potash solution mining district, in
close proximity to some of the largest operating potash solution mines in the world(2), but also because of
the historic technical work completed on the property to date.”
Mr. Halabura added: “Historic work completed by Imperial Oil (3) and the Lumsden Potash Development
Company(4) on the Disley Project in the 1960s includes multiple potash exploration drill holes across the
eastern and western portions of the Disley Project. These existing core samples provide valuable
subsurface geological information – effectively extending our understanding of the project area without
incurring the capital -intensive process of additional drilling. When integrated with a comprehensive 3D
seismic program, and the drill core from our recently completed 7-10 confirmation hole, this dataset is
expected to form a strong technical foundation to support the evaluation of the Disley Project with the goal
of advancing toward an updated National Instrument 43-101 (“NI 43-101”)-compliant Technical Report and
a PEA for the planned development of the showcase facility and initial mine(1).”
The Disley Project
The Disley Project is located approximately 50km northwest of Regina and covers 9,413 hectares. The
property is situated immediately adjacent to the east of the K+S Bethune potash solution mine and north of
the Mosaic Belle Plaine potash solution mine(2) – both of which are amongst the largest producing potash
solution mines in the world. In the opinion of management, the Disley Project is in one of the most favorable
areas of Saskatchewan for potash solution mining (see Figure 1) as evidenced by the success of these
neighboring projects(1)(2).
Legacy Drill Cores
During the 1960s, two drilling programs were undertaken on the western and eastern portions of the Disley
Project. Legacy potash core samples from these drilling campaigns (the “ Legacy Drill Cores”) are now
being re-assayed by Buffalo.
(i) The Lumsden Pilot Project - On the west side of the property, the Lumsden Potash Development
Company evaluated the potential for solution mining using brine injection and recovery wells.
(ii) Imperial Oil Exploration Hole – On the east side of the property, Imperial Oil undertook potash-
related exploration drilling as part of a regional potash exploration campaign.
The Company has initiated assay analysis on the Legacy Drill Cores from each of the Lumsden Pilot Project
and the Imperial Oil Exploration Hole. Sampling and assay procedures are being undertaken by the
Saskatchewan Research Council and will be consistent with the modern procedures being undertaken for
Buffalo’s 7-10 Hole (as defined below). The assay results from these Legacy Drill Cores will contribute to
an integrated geological and geophysical potash geoscience model (the “Potash Geoscience Model”) for
the Disley Project and furthermore, will help the Company advance its understanding of the Disley Project
with a view towards preparation of an updated NI 43-101-compliant Technical Report and PEA(1).
Figure 1: The Disley Property Situated Amongst Major Potash Solution Mines(1)
3D Seismic Program
Buffalo is also initiating a ~45km2 3D seismic program on a portion of the Disley Project (the “3D Seismic
Program”) designed to expand understanding of the geological continuity of potash beds on the property.
The program will connect existing 3D seismic coverage completed by Buffalo in 2022 on the western portion
of the Disley Project, including over the Lumsden Pilot Project (the “2022 3D Seismic”), to the Imperial Oil
Lumsden Exploration Hole near the eastern boundary of the Disley Project (see Figure 2 ). Buffalo
anticipates 3D seismic results will combine with the 2022 3D Seismic, potash assays from Legacy Drill
Cores and the new 7-10 Hole drill core assay results to inform the Potash Geoscience Model.
Figure 2: Buffalo 3D Seismic Coverage Over Disley Project
Successful Completion of 7-10 Hole
On February 5, 2026, the Company announced the successful completion of its 7 -10-20-23 W2M (the “7-
10 Hole”) confirmation drill hole at the Disley Project, reaching a total depth of 1,563 metres. The hole
successfully intersected all targeted potash-bearing members of the Prairie Evaporite Formation, with 108
metres of continuous core recovered at greater than 98% recovery. Core logging analysis, sampling, and
assaying are underway, with results to be reported in due course.
Figure 3: Drill Site of Buffalo’s 7-10 Hole
Buffalo Potash in the Media
Interview with Buffalo Potash CEO, Steve Halabura
https://www.youtube.com/watch?v=PbUOLoOVKw8
On the ground reporting at Buffalo’s first confirmation drill hole
https://globalnews.ca/video/11644221/buffalo-potash-tests-alternative-drilling-method-in-saskatchewan/
Qualified Person
The scientific and technical information contained in this news release has been reviewed and approved
by Douglas F. Hambley, PhD, PE, PEng, PG, an independent consultant of the Company and Qualified
Person as defined under NI 43-101.
About Buffalo Potash
Buffalo Potash is an emerging Saskatchewan -based potash developer pursuing a modular approach to
selective solution mining through its patented Horizontal Line-Drive (HLD) technology. Buffalo is advancing
the Disley Project – located next to several of the most prominent currently producing potash solution mines
in the world – with the objective of establishing capital -efficient, lower-impact potash production in one of
the world’s leading potash jurisdictions.
Contact
Steve Halabura | Chief Executive Officer & Director
Email: [email protected] | Phone: 1-306-220-7715
Neither the TSX Venture Exchange nor its Regulation Service Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Notes
(1) No mineral resources , as categorized by NI 43 -101, have been defined on the Disley Project. The
Company will need to conduct additional work in order to define mineral resources. There is no guarantee
that the Company will be able to define mineral resources as categorized by NI 43-101 on its Disley Project.
(2) The K+S Bethune potash solution mine and north of the Mosaic Belle Plaine potash solution mine
(together, the “Adjacent Properties”) may each be considered an “adjacent property” (within the meaning
of NI 43-101) to the Company’s Disley Project. The Company does not have any interest in either of the
Adjacent Properties. The Company believes this context is useful in illustrating the proven endowment of
the district, while noting that mineralization on adjacent or nearby properties is not indicative of
mineralization on the Company’s Disley Project. There is no guarantee that the Disley Project will yield
comparable results to any of these mines.
(3) Klingspor, A.M. (1966). Cyclic Deposits of Potash in Saskatchewan . Bulletin of Canadian Petroleum
Geology, Vol. 14, No. 2, pp. 193–207.
(4) Halabura, S.P. (Steve) and Hardy, M.P. (2007). An Overview of the Geology of Solution Mining of Potash
in Saskatchewan . Technical paper presented at the Solution Mining Research Institute Fall 2007
Conference, October 8–9, 2007, Halifax, Nova Scotia, Canada.
Forward-Looking Information
This news release contains “forward -looking information” and “forward -looking statements” (collectively,
“forward-looking information”) within the meaning of applicable Canadian securities legislation. Forward -
looking information is generally identifiable by the use of words such as “believes,” “may,” “plans,” “will,”
“anticipates,” “intends,” “could,” “estimates,” “expects,” “forecasts,” “projects,” or similar expressions, and
the negative of such expressions.
Forward-looking information in this news release includes, but is not limited to, statements regarding: plans
for the cores, including plans related to the logging, sampling and assaying of such cores; expectations
regarding the results of analysis, sampli ng and assays; expectations regarding the Disley Project’s
potentials for solution mining; and expectations regarding the completion of the Potash Geoscience Model,
NI 43-101-compliant Technical Report, and PEA.
Forward-looking information is based on management’s reasonable assumptions, estimates, analysis, and
opinions made in light of its experience, perception of historical trends, current conditions, and expected
future developments, as well as other factors that management believes are relevant and reasonable in the
circumstances as of the date such statements are made. These assumptions include, but are not limited
to, assumptions regarding geological continuity, potash grade and thickness, the applicability of historical
data, the performance of solution mining methods, costs of production, the availability of services and
equipment, the receipt of required permits and approvals, and the availability of financing on acceptable
terms.
Forward-looking information is subject to known and unknown risks, uncertainties, and other factors that
may cause actual results, performance, or achievements of the Company to differ materially from those
expressed or implied by such forward-looking information. Such risks and uncertainties include, but are not
limited to: risks related to exploration and development activities; uncertainty in geological interpretation;
reliance on historical data and pilot testing; technical risks associated with solution mining and new or
emerging technologies; regulatory approvals and permitting timelines; commodity price volatility; availability
of capital; and general economic, market, and business conditions.
Although the Company has attempted to identify important factors that could cause actual results to differ
materially from those contained in forward-looking information, there may be other factors that cause results
not to be as anticipated, estimated, or intended. There can be no assurance that such information will prove
to be accurate, as actual results and future events may differ materially from those anticipated in such
forward-looking information. Accordingly, readers should not place undue reliance on forward -looking
information. The forward-looking information contained herein is made as of the date of this news release,
and the Company disclaims any obligation to update or revise such information, except as required by
applicable securities laws.