Bonterra Intersects 5.6 g/t Au over 4 metres in the Western Extension of the Barry Deposit
2872 Sullivan Rd Suite 2
Val‐d’Or, Quebec
Office: (819) 825‐8678
Bonterra Intersects 5.6 g/t Au over 4 metres
in the Western Extension of the Barry Deposit
Val-d’Or, QC – September 22, 2020 – Bonterra Resources Inc. (TSX-V: BTR, OTCQX:
BONXF, FSE: 9BR2) (“Bonterra” or the “Company”) is pleased to announce the initial results
of the ongoing drilling campaign on the Barry project. The res ults include several intersections,
including 5.6 g/t Au over 4 metres (“m”) in hole MB-20-269, 4.3 g/t Au over 4.2 m and 8.9 g/t Au
over 0.5 m in hole MB-20-271, and 6.0 g/t Au over 1.8 m in hole MB-20-275.
The 2020 drilling campaign began on January 6, 2020 and was suspended on March 17, 2020 due
to the COVID-19 pandemic. This campaign resumed on July 23, 2020 with two drills currently in
operation, one on a barge on Lac Limpide and the other on dry land near the Barry deposit.
From January 6 to March 17, 2020, 26 drill holes were drilled f or a total of 10,662 m. Analyses
were pending for several drill holes. Some of the results of those holes were announced in a press
release dated April 1, 2020, but were incomplete.
Since July 23, 2020, the Company has drilled 20 additional holes representing a total of 6,400 m.
Results from seven holes are complete, some results from eight drill holes are still pending, and
drill core samples from five drill holes have yet to be analyzed.
This release presents the results from the drill holes not released prior or with pending results prior
to the suspension of drilling related to the COVID-19 pandemic as well as the drill holes of the
current campaign analyzed to date.
Pascal Hamelin, Interim CEO and VP, Operations commented: “I am very pleased to see these
very encouraging results to the west of the Barry deposit this early in the drilling campaign. It
bodes well for the rest of the campaign and ultimately for the potential to add mineral resources in
the next resource update.”
The 20,000 m drilling campaign on the Barry project is designed to:
1) Develop the western and eastern extensions of the Barry deposit on land;
2) Perform infill drilling between intervals greater than 100 m around the deposit, as
outlined by the 2019 resource estimate; and
3) Explore a magnetic anomaly under Lac Limpide west and north of the deposit.
The following table shows the significant intersections of the drill holes.
Hole ID From (m) To (m) Length (m) (Au g/t) Zones Purpose
MB-20-257
303.9 307.6 3.7 1.2
Infill Resource
310.8 311.3 0.5 2.1
319.4 320.0 0.6 1.6
364.0 379.8 15.8 3.4
including 364.8 373.6 8.8 5.3
416.2 421.0 4.8 2.1
- 2 -
Hole ID From (m) To (m) Length (m) (Au g/t) Zones Purpose
MB-20-260
199.5 202.9 3.4 1.1 H1 Western
Extension 400.3 400.8 0.5 2.3
MB-20-261 339.9 340.5 0.6 1.5 Infill Resource
MB-20-262 199.5 200.0 0.5 1.0 Western
Extension
MB-20-263
21.4 22.3 0.9 1.0
Extension under
Lac Limpide 214.2 217.3 3.1 3.3 H2 216.0 217.3 1.3 7.4
MB-20-265
203.9 205.0 1.1 1.9 Western
Extension 344.7 347.5 2.8 1.1
MB-20-266
51.0 52.0 1.0 2.1
Infill Resource 61.5 62.3 0.8 4.3 950
70.2 71.3 1.1 2.5
78.2 82.0 3.8 1.2
MB-20-267 155.3 158.1 2.8 1.2 H1 Extension under
Lac Limpide
MB-20-268
26.2 26.9 0.7 1.3
Infill Resource
39.3 40.7 1.4 1.0 800
78.0 79.5 1.5 2.4
146.6 148.7 2.1 1.7
206.9 208.0 1.1 5.4 1000
MB-20-269
181.1 182.3 1.2 3.5
Western
Extension
242.8 246.8 4.0 5.6 H2
including 244.3 245.7 1.4 14.0
382.0 386.3 4.3 2.3 H15
MB-20-270 No significant values Extension under
Lac Limpide
MB-20-271
161.7 165.9 4.2 4.3
Western
Extension
198.2 199.0 0.8 2.8
273.3 274.8 1.5 1.1
367.7 368.2 0.5 8.9 H15
MB-20-272
93.2 95.1 1.9 2.3 H1
Western
Extension
114.8 115.3 0.5 1.1
173.6 174.1 0.5 2.2
MB-20-273
86.2 87.7 1.5 4.0 H1 Western
Extension 92.4 94.4 2.0 3.3
MB-20-274
59.5 61.7 2.2 1.9 H1 Extension under
Lac Limpide 245.4 246.1 0.7 1.1 H15
MB-20-275
75.1 76.1 1.0 1.6 H1
Western
Extension
155.5 157.3 1.0 6.0 H2
including 156.5 157.3 0.8 12.8
314.3 315.5 1.2 2.2 H15
- 3 -
Hole ID From (m) To (m) Length (m) (Au g/t) Zones Purpose
MB-20-276 Pending assays
MB-20-277 No significant values Extension under
Lac Limpide
MB-20-278
239.6 241.1 1.5 1.8
Infill Resource 294.7 295.2 0.5 1.0
337.6 338.2 0.6 3.8
Notes:
1) The meterage represents the length of the drilled lengths.
2) True widths are estimated to be greater than 85% of the drill intersection length.
3) The mineralized intervals shown above use a 1.0 g/t Au cut-off grade with not more than 0.5 m of internal
dilution.
Eight drill holes (MB-20-260; 262; 265; 269; 271 to 273 and 275) were drilled in the western part
of the Barry deposit, in the area of hole MB-20-250 (7.35g/t Au over 8.35 m) to determine the
extent of the zones of the deposit to the west of the deposit. The results of these drill holes indicate
that the zones extend to the west at least an additional 500 m. These holes have made it possible
to verify the continuity of zones H1, H2 and H15.
Five drill holes (MB-20-263; 267; 270; 274 and 277) were drilled on Lac Limpide from an ice drill
pad (263; 267 and 270) and on a barge for drill holes 274 and 2 77. Hole MB-20-270 had to be
abandoned following suspension of drilling due to the COVID-19 pandemic. However, holes
MB-20-267 and 274 have confirmed the continuity of the H1 zone.
Five holes (MB-20-257; 261; 266; 268 and 278) were drilled for infill purposes between the 2019
inferred resource. Two holes (266 and 268) are located northwe st of the 2019 resource and the
other three holes (257; 261 and 278) are located to the south of the resource.
Hole MB-20-266 has intercepted zone 950 with a value of 4.31 g/ t Au over 0.8 m. Drill hole
MB-20-268 confirmed the continuity of zone 1000 with 5.41 g/t Au over 1.1 m.
The three holes south of the Barry deposit intercepted zones be tween the H1 and 800 zones in
porphyry intrusions and often in b asalt shear zones in contact with these intrusions. Significant
drill intersections include MB-20-257 with 2.1 g/t Au over 4.8 m and MB-20-278 with 3.8 g/t Au
over 0.6 m.
- 4 -
Quality control and reporting protocols
The Barry project’s drill core gold analysis is performed at th e Bachelor Mine Analysis
Laboratory. The Company employs a rigorous QA-QC analysis prog ram that meets industry
standards. The analytical resu lts were carried out by fire ass ay (A.A.) in the mine laboratory.
Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor
laboratory performance. The Company's QA-QC analytical verification program requires that at
least 10% of samples be audited in an independent laboratory. These verification tests were sent
to the ALS laboratory located in Val-d'Or, Quebec. The results of the audits are consistent with
those obtained.
- 5 -
Qualified persons
Sabrina Bernard, P.Geo., Chief Geologist of the Company oversee s all exploration activities on
the Barry Project. Ms. Bernard is a qualified person as define d by National Instrument 43-101
(“NI-43-101”). Marc Ducharme, P.Geo. and Bonterra’s Principal Geologist , approved the
information contained in this press release. Mr. Ducharme is a Qualified Person as defined by NI
43-101.
Upcoming Events
Webinar - September 24, 2020 at 11:00 am EST hosted by Adelaide Capita l. Registration link:
https://us02web.zoom.us/webinar/register/WN_laVZ3mNXQE6Hy_9uKA9aDA
FOR ADDITIONAL INFORMATION:
Pascal Hamelin, Interim CEO and VP Operations
2872 Sullivan Road, Suite 2, Val d’Or, Quebec J9P 0B9
819-825-8678 | Website: www.btrgold.com
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the
TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Cautionary and Forward-Looking Statements
This press release contains "forward-looking information" that is based on Bonterra’s current expectations, estimates,
forecasts and projections. This forward-looking information includes, among other things, statements with respect to
Bonterra’s exploration and development plans. The words "will", "anticipated", "plans" or other similar words and
phrases are intended to identify forward-looking information. T his forward-looking information includes namely,
information with respect to the planned exploration programs an d the potential growth in mineral resources.
Exploration results that include drill results on wide spacings may not be indicative of the occurrence of a mineral
deposit and such results do not provide assurance that further work will establish sufficient grade, continuity,
metallurgical characteristics and economic potential to be clas sed as a category of mineral resource. The potential
quantities and grades of drilling targets are conceptual in nature and, there has been insufficient exploration to define
a mineral resource, and it is uncertain if further exploration will result in the targets being delineated as mineral
resources. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that
may cause Bonterra’s actual results, level of activity, perform ance or achievements to be materially different from
those expressed or implied by such forward-looking information. Such factors include but are not limited to:
uncertainties related exploration and development; the ability to raise sufficient capital to fund exploration and
development; changes in economic conditions or financial market s, environmental and other judicial, regulatory,
political and competitive developments; technological or operat ional difficulties or inability to obtain permits
encountered in connection with exploration activities; and labo ur relations matters. This list is not exhaustive of the
factors that may affect our forward-looking information. These and other factors should be considered carefully and
readers should not place undue reliance on such forward-looking information.