Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

BLDS.V ·

Deep "Trunk" Hole at Standby Gold Project Designed to Intersect Two High Grade Gold Zones Progressing Well Mineral Mountain Closes Final Tranche of Private Placement MMV-TSX-V MNRLF-OTCQB

Financings Exploration Programs

Deep "Trunk" Hole at Standby Gold Project

Designed to Intersect Two High Grade Gold

Zones Progressing Well Mineral Mountain

Closes Final Tranche of Private Placement

MMV-TSX-V

MNRLF-OTCQB

VANCOUVER

,

Oct. 11, 2019

/CNW/ - Mineral Mountain Resources Ltd. and Mineral Mountain

Resources (SD) Inc. ("

Mineral Mountain

" or the "

Company

") (TSXV: "MMV") is pleased to

announce that the

1600 m

"trunk hole",

ST19-011

, designed to test two historical high grade gold

zones, previously announced in a news release dated

September 17, 2019

, is progressing as

planned and on target.

Major Drilling

, experienced leaders in the use of directional drilling technology

are the contractors selected to complete this

4,000 m

drill program to target historic high grade gold

intersections and to extend the gold mineralization recorded in the Company's Phase 1 program

completed in 2018 along the

East Limb Shear Structure

in iron formation. Only the initial

450 m

plunge length of the structure was drill tested and confirming Homestake-style gold mineralization.

Historic intersections along the

East Limb Structure,

which hosts the Standby Mine, include

BLG-

UG3=

24.0 m

@ 3.36 g/t Au

down plunge from the historic mine workings and

SM87-3A=

3.10 m

@

10.29 g/t Au

intersected

1800 m

down plunge along the structure. The major benefits to employing

directional drilling technology is that it enables the Company to dramatically lower overall drill costs

by utilizing shorter directional offsets from a deep "trunk hole" to test the gold bearing structure

along plunge rather than drilling each hole from surface, provides quicker turn-around for assays

because of the reduced meter necessary to effect multiple penetrations of the mineralized zone and,

importantly reduces the local environmental impact by utilizing fewer drill sites.

After the completion of hole

ST10-011,

the hole will be probed geophysically with "state of the art"

BHEM technology. This technology has the capability to see up to

400 m

off hole along the

mineralized structure down plunge towards the high-grade gold zone. This BHEM can also see

localized conductive responses directly associated with highly sulfidic gold mineralization.

Scope of Directional Drill Program

A "trunk hole" of up to 1600 meters in length will be directed down the plunge of the East Limb

Structure using directional drilling technology towards two separate historic gold zones, Target 1

(shallower) and Target 2 (deepest), that are about

750 m

apart. Several shorter off set holes will

then be drilled between the two targets, including above and below Targets 1 and 2, to more

thoroughly explore the East Limb Structure (see schematic cross section posted on the Company's

website

www.mineralmtn.com

.)

The Standby Target -Thickened Iron Formation Cut by a Regional Deformation Zone

The Standby Mine, a turn of the 20

th

century producer, is situated 16 miles (25 km) south of the

Homestake Gold Mine, the largest iron-formation-hosted gold deposit in the world, having produced

over 40 million ounces of gold over its 125 year history at an average historical reserve grade of

approximately 0.27 opt (8.38 g/t Au).

The Standby Target is situated in the northern portion of the

5 mile long (8 km) Standby-Bloody

Gulch-Lookout Trend

, and represents the southern extension of the

Homestake Corridor,

which

comprises tightly folded and thickened iron formation, the gold-host rock, cut by numerous major

northwest trending, steep, mineralized structures

.

Based on 3D modelling of the Company's 2013

airborne magnetics, surface geological mapping and the control provided by several historic deep

hole arrays completed by Homestake Mining in 1986-87,

The Standby Target Trend alone is of

sufficient scale (i.e. multi-kilometer plunge length of structurally thickened iron formation) to

host a major gold ore-bearing structure on the scale of the Homestake 9-Ledge

, without even

considering the numerous other major structural trends within gold bearing iron formation present on

Mineral Mountain's 30 sq. km Rochford District land package.

Drilling to date by Mineral Mountain has partially defined a gold-bearing, arsenopyrite-pyrrhotite

mineralized, near-vertical shear zone in iron formation, approximately

30 m

wide, striking 129

degrees Azimuth, in structurally thickened iron formation which comprises a tight isoclinal, steeply

dipping closed anticlinal structure forming the eastern limb of the Standby Syncline. This structure,

the East Limb Structure, has been traced for over 400 meters to date in the Company's 2018

drilling, and the Company's database confirms that this gold mineralization also continues through a

number of deep drill holes up to 1.8 kilometers down-plunge that were drilled by Homestake Mining

in 1986-87. In 1987, Homestake drilled SM87-3A which intersected

3.1 m

@ 10.29 g/t Au

at about

1800 m

down plunge. As one example from this trend to date, MMV drill hole ST18-006 intersected

2.12 g/t Au over 20 meters

, including

4.39 g/t Au over

2.5 m

and

5.24 g/t Au over

1.5 m

,

230m

below surface. This drill hole is

50m

down plunge of historical drill hole BLG-UG3 which graded

3.36

g/t Au over 24 meters

. The ST18-006 intersection occurs within a

34 m

wide classic Homestake-

style quartz vein-hydrothermal chlorite breccia with quartz flooding, 3-15% coarse-grained

arsenopyrite and 3-7% pyrrhotite, within the host iron formation.

Mineral Mountain Closes Final Tranche of Private Placement

Mineral Mountain is pleased to announce that subject to acceptance for filing of the final

documentation by the TSX Venture Exchange ("TSX-V"), it has closed the final tranche of its non-

brokered unit ("Unit") private placement (the "

Private Placement

") announced previously on

August

30, 2019

and has issued 16,060,868 units of the Company ("

Units

") at a price of

C$0.15

per Unit to

raise gross proceeds of

CDN$2,409,130.20

. Each Unit consists of one common share of the

Company and one common share purchase warrant (a "

Warrant

"), with each Warrant entitling the

holder to purchase one common share of the Company (a "

Warrant Share

") for a period of one (1)

year from closing at an exercise price of

C$0.25

per Warrant Share.

A finder's fee of 7% was paid to arm's length third parties on a portion of the Private Placement.

The net proceeds raised from the Private Placement are intended to be used to fund the

4,000 m

program outlined above, and, for corporate and general working capital purposes.

The securities issued pursuant to the Private Placement are subject to applicable statutory resale

restrictions, including a hold period expiring on

February 12, 2020

pursuant to applicable Canadian

securities laws.

The Company also announces that, pursuant to its stock option incentive plan, it has granted to

directors and officers of the Company incentive stock options to purchase 1,575,000 shares at CDN

$0.175

with an expiry date of 5 years from the date of the grant.

On Behalf of the Board of Directors

MINERAL MOUNTAIN RESOURCES LTD.

"Nelson W. Baker"

, President and CEO

Neither the TSX Venture Exchange nor its Regulation Services Provider (as such term is defined in

policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this

release.

Forward looking information

This release includes certain statements that may be deemed to be "forward-looking information"

under Canadian securities laws. All statements in this release, other than statements of historical

facts, that address events or developments that the Company expects to occur, constitute forward

looking- information. Forward looking information consists of statements that are not historical

facts and are generally, but not always, identified by the words "expects", "plans", "could" or

"should" occur. Although the Company believes the expectations expressed in such forward-

looking information are based on reasonable assumptions, such information does not constitute

guarantees of future performance and actual results may differ materially from those in forward-

looking information. Factors that cause the actual results to differ materially from those in forward-

looking information include gold prices, results of exploration and development activities,

regulatory changes, defects in title, availability of materials and equipment, timeliness of

government approvals, continued availability of capital and financing and general economic,

market or business conditions. The Company cautions the foregoing list of important factors is not

exhaustive. Investors and others who base themselves on the Company's forward-looking

information should carefully consider the above factors as well as the uncertainties they represent

and the risk they entail. The Company believes that the expectations reflected in the forward-

looking information are reasonable, but no assurance can be given that these expectations will

prove to be correct. Please see the public filings of the Company at

www.sedar.com

for further

information.

SOURCE

Mineral Mountain Resources Ltd.

View original content to download multimedia:

http://www.newswire.ca/en/releases/archive/October2019/11/c2145.html

%SEDAR: 00029624E

For further information:

Brad Baker, Vice-President Corporate Development & Director, (778)

383-3975 [email protected], or visit our website: www.mineralmtn.com

CO: Mineral Mountain Resources Ltd.

CNW 17:54e 11-OCT-19