Hercules Intersects 300m of 0.70% CuEq, including 138m of 1.01% CuEq, Starting 70m from Surface
Hercules Intersects 300m of 0.70% CuEq,
including 138m of 1.01% CuEq, Starting 70m
from Surface
Toronto, Ontario--(Newsfile Corp. - January 15, 2025) -
Hercules Metals Corp.
(
TSXV: BIG) (OTCQB:
BADEF) (FSE: C0X)
("
Hercules Metals
" or the "
Company
") is pleased to announce new step-out
drilling results from its Hercules Property in western Idaho ("
Hercules
" or the "
Property
"). Drill hole
HER-24-20
, a 330m step-out, intersected 300m of 0.70% CuEq, beginning at a true depth of 70 meters
below surface - the shallowest that porphyry mineralization has been drilled on the Property. Figure 2
illustrates the thinning cover sequence, which fully pinches out to the east, and exposes a multi-kilometer
copper-molybdenum-gold-in-soil anomaly - to be drilled for the first time in the coming drill campaign.
A separate step-out hole,
HER-24-19
, was collared 530m southwest of HER-24-20, and intersected
149m of 0.78% CuEq, including 43m of 1.22% CuEq.
These step-out holes expand the system to the south and southeast, building on recent results in HER-
24-12, which saw grades increasing at the opposite end of the system, toward the north and at depth.
Highlights
Step-out hole HER-24-20 intersects 300m of 0.70% CuEq, including 138m of 1.01% CuEq
beginning 70m below surface - the shallowest porphyry intercept to date.
Overlying cover pinching out, exposing a multi-kilometer copper-molybdenum-gold soil
anomaly - to be tested in the coming drill campaign.
Builds on recent drilling at the opposite end of the system, with mineralization now
increasing in multiple directions.
Large step-out hole HER-24-19 also intersects 149m of 0.78% CuEq, including 43m of
1.22% CuEq.
Chris Paul, CEO and Director of the Company, noted: "The Eastern Block Zone remains one of the best
undrilled targets at the Hercules Property. So far, our efforts have focused on the initial discovery area,
while gradually moving toward the large soil anomaly first identified in 2022. While securing the US
Forest Service (USFS) permit to drill the Eastern Block late last season, the combination of approaching
winter conditions and a backlog of assays led us to postpone that new road and drill pad construction
until early 2025. However, with assays confirming the enrichment zone approaches within 70 meters of
surface near HER-24-20, we're now better positioned to begin targeting the highly anticipated Eastern
Block Zone this spring.
The most recent IP survey indicates that mineralization extends well beyond the current limit of drilling.
Despite expanding the survey in 2023, many anomalies in the western half remain open outside the
survey area. To address this, the Company is now considering the largest geophysical survey ever
conducted at the Hercules Property. Such a survey could involve working with a co-operative group of
neighbouring companies, which would increase the overall coverage and depth of penetration. We look
forward to sharing details as they come available."
HER-24-19 and HER-24-20 CORE PHOTOS AVAILABLE FOR VIEWING AT:
https://www.herculesmetals.com/hercules/core-photos/
Table 1: Highlight Intercepts
Hole ID
From (m)
To (m)
Interval (m)
Cu (%)
Ag (g/t)
Mo (ppm)
CuEq (%)
1
HER-24-19
286.51
435.89
149.38
0.62
11
116
0.78
including
291.08
333.76
42.68
0.92
30
96
1.22
HER-24-20
102.11
402.34
300.23
0.55
4
182
0.70
including
177.88
315.47
137.59
0.85
5
172
1.01
Figure 1: Drill Plan with grade bars for copper (orange) and molybdenum (dark blue) for holes
with assays received. Surface projection of secondary enrichment blanket outlined in orange.
Location of cross-section A-A' shown on Figure 2 is indicated by black line.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/9425/237268_cd979cdaf45baa84_002full.jpg
Figure 2: Cross-section A - A'. The higher-grade enrichment zone trends directly under a large
untested soil anomaly in the Eastern Block Zone - a focus of the upcoming drill plan. The
inferred location of a magmatic hydrothermal breccia intersected by HER-24-20 is shown for
reference. It is unclear how far east the breccia extends; however, the source of certain
strongly altered and mineralized clasts presents a compelling target.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/9425/237268_cd979cdaf45baa84_003full.jpg
Table 2: Additional Intercepts
Hole ID
From (m)
To (m)
Interval (m)
Cu (%)
Ag (g/t)
Mo (ppm)
HER-24-14
175.53
176.14
0.61
2.16
6
1
HER-24-15
331.62
344.12
12.5
0.53
1
37
AND
423.18
456.9
33.72
0.59
4
19
HER-24-16
DID NOT REACH UNCONFORMITY
HER-24-17
615.7
774.19
158.49
0.21
3
52
HER-24-18
427.21
617.62
190.41
0.24
2
47
Drill Hole Summaries
HER-24-20 was collared near a significant copper-in-soil anomaly where the porphyry system is
exposed at surface. Mineralization begins just 70 meters vertically below surface (Figure 2).
The hole starts within silver-bearing Jurassic rhyolite. Beneath the Jurassic cover, a newly identified late-
stage magmatic hydrothermal breccia is intersected, with mineralization in both the matrix and clasts,
which increase in intensity toward the footwall contact. The clasts - rock fragments transported upward
through explosive activity - are strongly altered and veined, with some having substantial mineralization.
The source of these mineralized clasts represents a compelling new conceptual target for future
exploration.
Below the hydrothermal breccia, the hole intersects a high-grade section containing 138m of 0.85% Cu,
5 g/t Ag and 172 ppm Mo. A broader interval, encompassing the mineralized breccia, returned 300m of
0.55% Cu, 4 g/t Ag and 182 ppm Mo, marking the strongest molybdenum grades encountered to date.
HER-24-19 intersected 149m of mineralized wall rock grading 0.62% Cu, 11 g/t Ag, and 116 ppm Mo,
including 43m of 0.92% Cu, 30 g/t Ag, and 96 ppm Mo. Subsequently, the hole entered a low-grade late
porphyry, as described in a
previous news release dated November 19, 2024
. The distinction between
the low-grade late porphyry and higher-grade wall rock remains the central focus for our geological
modeling team ahead of the 2025 drill program.
HER-24-16 was a wildcat hole designed to test the southern extension of a large IP anomaly. The hole
was collared in the Southern Flats Zone, a basalt-covered plateau in the southern part of the property.
Previously, the post-mineral basalt had prevented historical exploration and drilling in the area. However,
new IP data shows the porphyry system extends this way at depth, while surface sampling and mapping
reveals the shallow silver system trends directly underneath it as well.
HER-24-16 confirmed the basalt layer to be less than 40 meters thick, significantly thinner than expected.
Below the basalt, silver-bearing Jurassic rhyolite extends to the end of the hole at 710m. The rhyolite was
selectively sampled, returning 160m of 23 g/t Ag, 0.19% Pb and 0.11% Zn, including a higher-grade sub-
interval of 31m of 79 g/t Ag, 0.87% Pb and 0.12% Zn. As a result, the remainder of the hole is now being
sampled. The presence of epithermal mineralization below the basalt supports the interpretation that the
chargeability anomaly reflects an extension of the porphyry system, linked to the same major regional
structures. Follow-up drilling is planned east of HER-24-16, where the Jurassic cover thins near the
copper-in-soil anomaly discussed earlier (Figure 1).
Notably, recent metallurgical testing yielded silver recoveries exceeding 80% using a simple two-step
leaching process, presenting a favorable scenario for evaluating potential pre-stripping opportunities in
the future.
Table 3: New Southern Flats Silver Zone Intercepts
Hole ID
From (m)
To (m)
Interval (m)
Ag (g/t)
Pb (%)
Zn (%)
HER-24-16
47.24
207.42
160.18
23
0.19
0.11
including
60.96
92.26
31.30
79
0.87
0.12
including
77.72
80.77
3.05
310
1.39
0.10
Table 4: Other Silver Intercepts in Jurassic Cover Sequence
Hole ID
From (m)
To (m)
Interval (m)
Ag (g/t)
Pb (%)
Zn (%)
HER-24-15
5.88
23.62
17.74
10
-
0.15
HER-24-17
582.17
643.13
60.96
10
-
-
including
615.7
621.79
6.09
29
-
-
HER-24-18
6.10
132.59
126.49
7
0.23
0.24
including
54.86
65.53
10.67
22
0.69
0.39
including
124.97
129.54
4.57
37
2.27
0.48
HER-24-19
0
45.72
45.72
29
-
-
including
0
25.91
25.91
43
-
-
Table 5: Reported Drill Hole Locations
Hole ID
Easting
Northing
Elevation
Depth (m)
Azimuth
Dip
HER-24-14
512155.6
4955436.9
1255.1
197.08
55.02
-55.01
HER-24-15
511967.5
4957150.7
1584.9
557.20
34.93
-69.99
HER-24-16
511421.5
4954971.1
1258.9
709.70
320.00
-75.00
HER-24-17
510922.1
4955814.0
1275.6
975.36
75.03
-70.02
HER-24-18
511962.6
4957148.7
1581.0
644.32
199.89
-55.22
HER-24-19
511437.5
4955990.4
1364.0
517.49
134.41
-51.08
HER-24-20
511928.8
4956200.0
1437.5
625.45
260.12
-45.24
Sample Analysis and QAQC
All drill core samples were prepped and analyzed at MSA Labs in Langley, British Columbia, an ISO
17025 and ISO 9001 certified laboratory. Samples were dried and crushed to 2mm, from which a 250g
sub-sample split was then pulverized to 85% passing a 75 micron sieve. Following preparation, assays
were determined by the IMS-230 method. A 0.25g aliquot of the prepared pulp was digested in a 4-acid
solution consisting of hydrochloric, nitric, perchloric and hydrofluoric acids. 4-acid is a near total digest
and only the most highly resistant minerals are not dissolved. The resulting solution was analyzed via
ICP-MS and ICP-ES for 48 elements and was corrected for inter-element spectral interferences.
Lower
detection limits for this procedure are 0.01 ppm for silver, 0.5 ppm for lead, 2 ppm for zinc, and 0.2 ppm
for copper. Mercury is not reported due to volatilization in reaction with hydrofluoric acid and gold is not
reported due to the small, 0.25g aliquot size being insufficient to overcome the nugget effect.
Gold was analyzed by FAS-111, a 30-gram fire assay fusion with AAS finish. No significant results were
reported.
Samples with initial results beyond the upper detection limit of the IMS-230 method were analyzed by
procedures ICF-6Ag, ICF-6Cu, ICF-6Pb and ICF-6Zn.
The thresholds are 100 ppm for silver, and >1%
for copper, lead and zinc.
MSA Labs employs internal quality control standards, duplicates and blank samples at set frequencies.
Blind certified reference materials (CRMs) and blank samples were systematically inserted by the
Company into the sample stream and analyzed as part of the Company's quality assurance/quality
control protocol.
Qualified Person
The scientific and technical information in this news release has been reviewed and approved for
disclosure by Kelly Malcolm, P.Geo., Director of Hercules Metals. Kelly Malcolm is a "Qualified Person"
for Hercules Metals within the meaning of National Instrument 43-101 -
Standards of Disclosure for
Mineral Projects
.
Corporate Update
The Company announces that Chris Longton has departed from his role as Vice President of
Exploration. The Company thanks Mr. Longton for his valuable contributions to the advancement of the
Hercules Project. The Company is currently evaluating internal and external candidates to fill the Vice
President of Exploration position. Updates regarding this transition will be communicated in due course.
About Hercules Metals Corp.
Hercules Metals Corp. (TSXV: BIG) (OTCQB: BADEF) (FSE: C0X) is an exploration Company focused
on developing Idaho's newest copper and silver district.
The 100% owned Hercules Project located northwest of Cambridge, hosts the newly discovered
Leviathan porphyry copper system, one of the most important discoveries in the region to date. The
Company is well positioned for growth through continued drilling, supported by extensive historical and
current exploration and a strategic investment by Barrick Gold.
With the potential for significant scale, the Company's management and board of directors aims to build
on its proven track record which includes the discovery and development of numerous precious metals
projects worldwide.
For further information please contact:
Nisha Hasan
Investor Relations
Telephone +1 (604) 425-1408
Email:
Chris Paul
CEO & Director
Telephone +1 (604) 670-5527
Email:
This news release does not constitute an offer to sell or a solicitation of an offer to buy any of the
securities in the United States. Any securities referred to herein have not and will not be registered under
the United States Securities Act of 1933, as amended (the "
U.S. Securities Act
") or any state
securities laws and may not be offered or sold within the United States or to U.S. Persons unless
registered under the U.S. Securities Act and applicable state securities laws of an exemption from such
registration is available.
Disclaimer for Forward-Looking Information
This news release contains certain information that may be deemed "forward-looking information" with
respect to the Company within the meaning of applicable securities laws. Such forward-looking
information involves known and unknown risks, uncertainties and other factors that may cause the
Company's actual results, performance or achievements, or developments in the industry to differ
materially from the anticipated results, performance or achievements expressed or implied by such
forward-looking information. Forward-looking information includes statements that are not historical facts
and are generally, but not always, identified by the words "expects," "plans," "anticipates," "believes,"
"intends," "estimates," "projects," "potential" and similar expressions, or that events or conditions "will,"
"would," "may," "could" or "should" occur. Forward-looking information contained in this press release
may include, without limitation, the expected execution of future exploration programs on the Property;
assay results of future drill holes; results of operations, and the expected financial performance of the
Company.
Although the Company believes the forward-looking information contained in this news release is
reasonable based on information available on the date hereof, by its nature, forward-looking information
involves assumptions and known and unknown risks, uncertainties and other factors which may cause
our actual results, level of activity, performance or achievements, or other future events, to be materially
different from any future results, performance or achievements expressed or implied by such forward-
looking information.
Examples of such assumptions, risks and uncertainties include, without limitation, assumptions, risks
and uncertainties associated with general economic conditions; the Covid-19 pandemic; adverse
industry events; the receipt of required regulatory approvals and the timing of such approvals; that the
Company maintains good relationships with the communities in which it operates or proposes to
operate, future legislative and regulatory developments in the mining sector; the Company's ability to
access sufficient capital from internal and external sources, and/or inability to access sufficient capital on
favorable terms; mining industry and markets in Canada and generally; the ability of the Company to
implement its business strategies; competition; the risk that any of the assumptions prove not to be valid
or reliable, which could result in delays, or cessation in planned work, risks associated with the
interpretation of data, the geology, grade and continuity of mineral deposits, the possibility that results
will not be consistent with the Company's expectations, as well as other assumptions risks and
uncertainties applicable to mineral exploration and development activities and to the Company, including
as set forth in the Company's public disclosure documents filed on the SEDAR+ website at
www.sedarplus.ca
.
THE FORWARD-LOOKING INFORMATION CONTAINED IN THIS PRESS RELEASE
REPRESENTS THE EXPECTATIONS OF HERCULES METALS AS OF THE DATE OF THIS
PRESS RELEASE AND, ACCORDINGLY, IS SUBJECT TO CHANGE AFTER SUCH DATE.
READERS SHOULD NOT PLACE UNDUE IMPORTANCE ON FORWARD-LOOKING
INFORMATION AND SHOULD NOT RELY UPON THIS INFORMATION AS OF ANY OTHER
DATE. WHILE HERCULES METALS MAY ELECT TO, IT DOES NOT UNDERTAKE TO UPDATE
THIS INFORMATION AT ANY PARTICULAR TIME EXCEPT AS REQUIRED IN ACCORDANCE
WITH APPLICABLE LAWS.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this
press release.
________________________
1
Copper equivalent (CuEq) is calculated using US$3/lb Cu, US$20/oz Ag, and US$25/lb Mo with 80% metallurgical recoveries assumed for all metals.
The formula is: CuEq % = Cu % + (0.00778 * Ag g/t) + (0.000667 * Mo ppm)
To view the source version of this press release, please visit
https://www.newsfilecorp.com/release/237268