Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

BHS.V ·

Bayhorse Silver Receives Two Silver Exploration Tar gets From Additional Magnetic Survey Analysis On Its Bayhorse Properties.

Exploration Programs

April 15, 2024. BHS2024-09

Bayhorse Silver Receives Two Silver Exploration Tar gets From Additional Magnetic Survey

Analysis On Its Bayhorse Properties.

Bayhorse Silver Inc, (BHS: TSX-V, BHSIF: OTCQB, 7KXN: FRANKFURT) (the “Company”

or “Bayhorse”) has received from Geotech its magnetic structural interpretations and structural

complexity analysis of its recent survey from the Bayhorse Idaho/Oregon Geophysics Project area.

The area is situated in the Huntington, Oregon and Weiser portions of Idaho. This summary report

describes the results of the geophysical interpretations, and the results of magnetic modeling.

Two silver exploration targets, BGP_T1 and BGP_T2 have been identified (Figure 1). BGP_T1

covers the western half of the Bayhorse Silver Mine while BGP_T2 located in the NE region of the

Idaho portion of the survey area could be a potential silver exploration target.

We are particularly encouraged that one of the silver targets on the Oregon side aligns well with the

western end of the Bayhorse Mine workings. This confirms our intention to extend the underground

drilling to the west, as well as downdip . On the Idaho claims, where drill permitting is underway, the

silver target BGP_T2 suggests the possibility of a silver endowment like that at the Bayhorse Mine

(Figure 1).

Bayhorse CEO, Graeme O’Neill, comments “ Geotech, with its huge experience in VTEM and

Magnetic surveying has provided analysis of the magnetic signature at the Bayhorse Mine, that coupled

with our geologists’ significant understanding of the Bayhorse silver mineralization , have provided

excellent silver drill target at the Bayhorse Silver Mine a s well as on the newly acquired Idaho

properties.

The Bayhorse Mine style silver rich “tetrahedrite” mineralization is hosted in hydrothermally altered

rhyolite, that is dominated by presence of sulfosalts of silver, copper, antimony, low Fe zinc, and lead,

(Ray, 2015, NI-43-101 Technical Report)

Figure 1 Selected Ag exploration targets over the Structural Complexity (COD and OE) composite map.*.

The lines AA and BB may represent faults.

*(Structural Complexity (SC) is an important exploration parameter for structurally controlled

deposits. Two SC products are generated from the combined structural vectors, e.g., the Contact

Occurrence Density (COD) and Orientation Entropy (OE). The Idaho portion of the geophysical

interpretation area shows magnetic ridges and inferred faults (A -A and B- B) extending part way

southwesterly into the target area. There are also some evenly spaced magnetic ridges and inferred

faults surrounding the south half of the target area.)

Geophysics are an important tool in mineral exploration, however they do not necessarily indicate

economic mineralization and require drilling to determine the cause of their anomalies. Drill

permitting is underway for the Idaho targets.

This News Release has been prepared on behalf of the Bayhorse Silver Inc. Board of Directors,

which accepts full responsibility for its content. Mark Abrams, AIPG Certified Professional

Geologist, a Qualified Person and Director of the Company has prepared, supervised the preparation

of, and approved the technical content of this press release.

On Behalf of the Board.

Graeme O'Neill, CEO

866-399-6539

About Bayhorse Silver Inc.

Bayhorse Silver Inc. is an exploration and production company with a 100% interest in the historic

Bayhorse Silver Mine located in Oregon, USA. With state of the art Steinert Ore -Sorting technology

reducing waste rock entering the processing stream by up to 85%, we have created a minimum

environmental impact facility capable of mining 200 tons of mineralization per day and the ability to

process and supply 3,600 tons per year of silver/copper/antimony concentrate ranging between 7,500

to 15,000 g/t silver and 10-12% copper, 10-12% antimony, and 15-18% zinc using standard flotation

processing at its milling facility in nearby Payette County, Idaho, USA, with an offtake agreement in

place with Ocean Partners UK Limited. The Company also has an option to acquire an 80% interest in

the Brandywine high grade silver/gold property located in B.C. Canada. The Company has an

experienced management and technical team with extensive mining expertise in both exploration and

building mines.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the

policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this

release.