Bayhorse Receives Excellent Silver Assays FOR Silver Rich Bayhorse Silver MINE, Oregon, USA

November 3, 2021 BHS2021-19

BAYHORSE RECEIVES EXCELLENT SILVER ASSAYS FOR SILVER RICH

BAYHORSE SILVER MINE, OREGON, USA

Bayhorse Silver Inc (“Bayhorse” or the “Company”) (BHS TSX -V) has, received

excellent assay results from recent underground drilling at its silver rich, Bayhorse

Silver Mine, Oregon, USA.

The highest grade interval was 2,180g/t (63.65 oz/t) over 0.6m (2 ft.) in Hole

BHDD008, a 24.5 m (80 ft) underground hole, which intersected a 3.66 meter (12 feet)

interval from 17 m to 20.7 m (56 ft to 68 ft) assaying a weighted average of 844 g/t

(24.65 oz/t).

The full results are tabulated below

Sample ID Hole ID From ft To ft Au (ppm) Ag (Tr.

Oz/tn) Cu % Pb% Sb Zn

658145 21BHDD-008 40 45 <0.05 <0.05 <0.05 <0.05 <0.05 0.47

658146 21BHDD-008 45 48 <0.05 <0.05 <0.05 <0.05 <0.05 0.63

658147 21BHDD-008 48 51 <0.05 <0.05 <0.05 <0.05 <0.05 0.62

658148 21BHDD-008 51 54 <0.05 <0.05 <0.05 <0.05 <0.05 0.45

658149 21BHDD-008 54 56 <0.05 <0.05 <0.05 <0.05 <0.05 0.5

658151 21BHDD-008 56 58 <0.05 28.82 <0.05 <0.05 <0.05 0.85

658152 21BHDD-008 58 60 <0.05 63.65 <0.05 <0.05 <0.05 1.95

658153 21BHDD-008 60 62 <0.05 36.06 <0.05 <0.05 <0.05 2.59

658154 21BHDD-008 62 64 <0.05 8.50 <0.05 <0.05 <0.05 3.48

658155 21BHDD-008 64 66 <0.05 4.96 <0.05 <0.05 <0.05 2.05

658156 21BHDD-008 66 68 <0.05 5.96 <0.05 <0.05 <0.05 2.45

658157 21BHDD-008 68 74 <0.05 <0.05 <0.05 <0.05 <0.05 0.11

658158 21BHDD-008 74 75 <0.05 <0.05 <0.05 <0.05 <0.05 0.08

658159 21BHDD-008 75 79 <0.05 <0.05 <0.05 <0.05 <0.05 0.04

658161 21BHDD-008 79 80 <0.05 <0.05 <0.05 <0.05 <0.05 0.07

True width yet to be determined

BHDDH008 was drilled at the main haulageway intersection and intercepted

stockwork mineralization with a weighted average of 844.5 g/t (24.65 oz/t)

The westerly trending Bayhorse mineralized zone is open to the west, averages 25 feet

in thickness, and is up to 200 feet in width. It rises to the North of the main

haulageway and dips to the south. The Company is currently conducting drilling

operations in a zone 300 meters (1,000 ft) to 450 meters (1,500 ft) west of the Mine

Portal.

Underground drilling operations proceed as underground drifting installs additional

drill stations. Due to the shortage of experienced underground drillers, trained to Mine

Safety and Health Administration (MSHA) requirements, the Company has been

training its own underground drilling crews. Further drill results are pending and will

be released when received

Bayhorse CEO Graeme O’Neill comments “Despite the unprecedented challenges

posed this past year through Covid- related issues, the Company has steadily advanced

on a number of fronts to measure, develop, and recover silver from the Bayhorse.” He

further comments that “the new mill building has been erected with mill equipment

currently being installed, with completion projected for renewed operation by early

December”.

The Company is not basing any decision to produce on a feasibility study of mineral

reserves demonstrating economic and technical viability and advises there is an

increased uncertainty and specific economic and technical risk of failure with any

production decision. These risks include, but are not limited to, (i) a drop in price of

commodities produced, namely silver, copper, lead and zinc, from the pricing used to

make a production decision; (ii) failure of grades of the produced material to fall

within the parameters used to make the production decision; (iii) an increase in mining

costs due to cha nges within the mine during development and mining procedures; and

(iv) metallurgical recovery changes that cannot be anticipated at the time of

production.

This News Release has been prepared on behalf of the Bayhorse Silver Inc. Board of

Directors, whic h accepts full responsibility for its contents. Dr. Stewart Jackson,

P.Geo., a Qualified Person and Consultant to the Company has prepared, supervised

the preparation of, and approved the technical content of this press release.

On Behalf of the Board.

Graeme O'Neill, CEO

604-684-3394

About Bayhorse Silver Inc.

Bayhorse Silver Inc. is an exploration and production company with a 100% interest in

the historic Bayhorse Silver Mine located in Oregon, USA. With state of the art

Steinert Ore-Sorting technology reducing waste rock entering the processing stream by

up to 85%, we have created a minimum environmental impact facility capable of

mining 200 tons of mineralization per day and the ability to process and supply 3,600

tons per year of silver/copper concentrate ranging between 7,500 to 15,000 g/t using

standard flotation processing at its milling facility in nearby Payette County, Idaho,

USA, with an offtake agreement in place with Ocean Partners UK Limited. The

Company also has an option to acquire an 80% interest in the Brandywine high grade

silver/gold property located in B.C. Canada. The Company has an experienced

management and technical team with extensive mining expertise in both exploration

and building mines.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term

is defined in the policies of the TSX Venture Exchange) accepts responsibility for the

adequacy or accuracy of this release.