Material Change Report July 17, 2020
1
Form 51-102F3
Material Change Report
1. Name and Address of Company
Bam Bam Resources Corp.
2831 Wembley Drive
North Vancouver, BC, V7J 3B8
(the “Company”)
2. Dates of Material Change(s)
July 17, 2020
3. News Release(s)
News release was issued on July 17, 2020 and disseminated by Newsfile pursuant to
section 7.1 of National Instrument 51–102.
4. Summaries of Material Changes
The Company reports that core hole MHB-2 at the Majuba Hill Nevada flagship property
has returned significant copper and silver values.
5. Full Description of Material Changes
News Release dated July 17, 2020– See Schedule “A”.
6. Reliance on subsection 7.1(2) or (3) of National Instrument 51-102
Not applicable.
7. Omitted Information
No information has been omitted.
8. Executive Officer
Mr. David C. Greenway, CEO of the Company, is knowledgeable about the material
change contained herein and may be reached at (604) 318-0114.
9. Date of Report
This report is dated July 17, 2020.
2
SCHEDULE “A”
to the Material Change Report dated July 17, 2020
Bam Bam Drilling Returns to Date the
Greatest Gold, Silver and Copper
Intersects at Majuba Hill, Nevada
• Intersected 43 feet of 4.0% Cu and 204.4 g/t Ag
VANCOUVER, BC — July 17, 2020 — Bam Bam Resources Corp. (CSE: BBR / OTC:
NPEZF / FSE: 4NPA) (“Bam Bam” or the “Company”) is pleased to report that core
hole MHB -2 at the Majuba Hill Nevada flagship property has returned significant
copper and silver values.
Starting from the surface MHB -2 intersected an outstanding interval of copper and
silver. Using a length weighted average, MHB-2 returned extraordinary results:
• 146 feet from 0 to 146 feet @ 1.41% Cu and 97.6 ppm Ag including 28
feet from 12 to 40 feet @ 0.74% Cu and 120.8 ppm Ag and 43 feet from 91
to 134 feet @ 4.0% Cu and 204.4 ppm Ag
The interval is the drill length, true width of mineralization is not yet known. It is
comprised of 34 samples with 33 of the 34 samples greater than 0.05% copper.
1The copper equivalent (“CuEq”) value for the drill interval with MHB-2 is:
• 146 feet from 0 to 146 feet @ 2.38% CuEq
Copper CuEq% was calculated by converting length weighted silver values to copper
using USD$17/ounce silver and USD$2.50/lb. copper.
The hole also had 10 feet of good gold values with:
• 10 feet from 122 to 132 feet @ 1.283 ppm Au including 3.5 feet from 127
to 130.5 feet @ 2.33 ppm Au
David Greenway, President & CEO, commented: “I couldn’t be more excited about
today’s release! A clear and present confirmation on what I feel Majuba will continue
to deliver. These MIDWAY point results in our planned drill program are really just a
taste of what this property is evolving into. We have drilled 2 core holes which have
absolutely demonstrated that the key elements are present for a significant copper,
silver, and gold porphyry property at Majuba. We fully expect our in- progress RC
drilling at the Majuba Ridge Extension Zone will expand the known oxide zone. This
dollars in the ground approach is bringing Majuba forward as another major copper,
1 Copper equivalent grade including gold and silver values and based on 100% metal recoveries. Copper grade
equivalent calculation. Cu Eq% = (Cu % + ((Au grade x Au price) + (Ag grade x Ag price)) / (22.0462 x Cu price x 31.0135
g/t)
3
silver, and gold porphyry project in Nevada. We remain open on all sides and at depth
with grade continuing to improve at depth.”
Significant Porphyry-Style Setting
The copper, silver, and gold mineralization occur in intrusive rocks with porphyry -
style alteration. Three of the five intrusive assemblages at Majuba contain copper.
Copper oxide mineralization at the surface is within the quartz- sericite-pyrite (QSP)
zone. Surface geologic mapping and relogging of historic core holes has outlined
alteration zonation, with a QSP zone that grades into a potassic zone. Oxidation at
Majuba extends as deep as 800 feet. Significant sulfide copper mineralization has
been drilled in historic drill hole MMX-24 at the QSP/Potassic boundary.
Hole MHB-2 - Copper and Silver: 101 to 130.5 ft
Interval Cu Ag (ppm) From-To (feet)
5 ft 1.97% 93.6 101 to 106
1 ft 3.94% 70 106 to 107
3 ft 4.32% 419 107 to 110
2 ft 8.1% 316 110 to 112
5 ft 4.83% 280 112 to 117
4 ft 11.5% 487 117 to 121
4
1 ft 0.63% 25.6 121 to 122
3 ft 5.31% 213 122 to 125
2 ft 5.31% 42.6 125 to 127
3.5 ft 0.75% 301 127 to 130.5
Hi-grade mineralization in MHB -2 occurs with chalcocite, azurite, and malachite.
Cuprite has been identified in the historic drill core. This is similar to the high-grade
mineralization mined in the historic underground workings in the Middle Adit.
The hole was drilled northeasterly to test for extensions of the mineralization outward
from the historic workings.
MHB-2 also tested the contact between the late rhyolite porphyry and the early
rhyolite intrusive assemblage rocks. Mineralization in hole MHB-1 was within the late
rhyolite porphyry.
The 146-foot interval of 2.38% CuEq mineralization is in the early rhyolite porphyry.
Silica stockwork veins with and without sericite are commonly associated with the
copper and silver mineralization.
Reverse-circulation drilling will test the Majuba Oxide Extension Target Zone. The
Zone extends over 1,000 feet eastward from the Known Oxide Copper Mineralization
Zone to historic drill hole MG1703. Historic hole MG1703 intersected good grades of
oxide copper. Copper, silver, and gold mineralization is strongest in the early rhyolite,
felsite, and late rhyolite intrusive assemblages.
5
Quality Assurance/Quality Control ("QA/QC") Measures, Chain of Custody
The Company has implemented a QA/QC program using best industry practices at
the Majuba Hill Project. Drill core is delivered by the company consulting geologist to
the secure warehouse facility in Elko, Nevada. Drill core samples are sawn in half
lengthwise and one half is placed in labeled cloth sample bags. The samples are then
transported directly to the ALS Sample Prep Facility in Elko, Nevada. ALS then
transports the prepared pulps to their analytical lab in Reno, Nevada or Vancouver,
B.C. All samples are analyzed for copper, gold, silver, and 31 other elements. Gold is
determined by ALS method Au-AA23 which is a fire assay with an AAS finish on a 30-
gram split. Copper, silver and the remaining 31 elements are determined by ALS
method ME-ICP61 which is a four-acid digestion and ICP-AES assay. Approximately
5% of the submitted samples are copper- gold-porphyry commercial standard
reference material pulps, which are inserted in the analytical sample sequence. The
sample rejects and remaining pulps will be retrieved from ALS.
About Majuba Hill Property
The Majuba Hill Property encompasses 4,822 acres of surface and mineral rights that
includes 3 patented lode mining claims and 632 acres of privately owned surface and
minerals. The property is easily accessed via 23 miles of well -maintained dirt roads
leading from U.S. Interstate 80.
Qualified Persons
The scientific and technical information contained in this news release has been
reviewed by E.L. "Buster" Hunsaker III, CPG 8137 , a non- independent consulting
geologist who is a "Qualified Person" as such term is defined under National
Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43- 101").
6
About Bam Bam Resources Corp.
Bam Bam Resources Corp. (CSE: BBR / OTC: NPEZF / FSE: 4NPA) is engaged in the
identification, review and acquisition of latter stage copper and copper/gold assets.
The flagship project is the Majuba Hill copper gold project located 156 miles outside
Reno, Nevada, USA. Management has been mandated to focus on safe, mining
friendly jurisdictions and government regulations supportive of mining operations.
Neither the Canadian Securities Exchange nor its Market Regulator (as that term is
defined in the policies of the Canadian Securities Exchange) accepts responsibility for
the adequacy or accuracy of this release.
On Behalf of the Board of Bam Bam Resources Corp.
“David Greenway”
David C. Greenway
President & CEO
For further information, please contact:
P: (604) 318-0114