Brixton Metals Drills 906 g/t Silver over 4.3 m, including 1,329 g/t Silver over 1.8 m, all within 23.7 m of 206.6 g/t Silver at its Langis Project And 4.95 m of 493 g/t silver, including 1,798 g/t silver over 1.0 m
Brixton Metals Drills 906 g/t Silver over 4.3 m, including 1,329 g/t Silver over 1.8 m,
all within 23.7 m of 206.6 g/t Silver at its Langis Project
And
4.95 m of 493 g/t silver, including 1,798 g/t silver over 1.0 m
VANCOUVER, Brit ish Columbia, June 16, 2026 (GLOBE NEWSWIRE) - Brixton Metals
Corporation (TSX-V: BBB, OTCQX: BBBXF) (the “Company” or “Brixton”) is pleased to announce
results from its ongoing exploration at the wholly owned Langis Silver Project, located in the historic
silver mining c amp of Cobalt, Ontario, Canada. The 2026 drill campaign marks a significant
milestone, targeting both infill and expansion of established high-grade silver zones. To date, a total
of 18,678.05 meters across 90 drill holes has been completed in 2026.
Highlights
• Hole LM-26-342 intersected 23.70 m of 206.6 g/t silver from 109.80 m depth in the Shaft 6
South (S6-S) area
o Including 4.30 m of 905.6 g/t silver
o Including 1.80 m of 1,329 g/t silver
• Hole LM-26-355 intersected 4.95 m of 492.8 g/t silver from 146.10 m depth in the Shaft 6
Southeast (S6-SE) area
o Including 2.00 m of 977.2 g/t silver
o Including 1.00 m of 1,798 g/t silver
• Hole LM -26-348 returned 2.00 m of 624 .0 g/t silver from 147.70 m depth in the Shaft 6
Southeast (S6-SE) area
Chairman, CEO, Gary R. Thompson stated, “We are delighted to report additional high-grade silver
drill results from the Langis 2026 drill program . Furthermore, it is also promising to observe
disseminated silver mineralization, as it’s generally associated with large-scale, bulk -tonnage
potential. The second drill is now operational to meet our goal of 60,000 meters of drilling at Langis
this year as we advance toward a maiden resource estimate. We were told by locals in the area that
Brixton’s program is the largest drill campaign of any company in the camp.”
Figure 1. Photographs of hole LM-26-342 at 118.50 m showing disseminated native silver.
Figure 2. Photographs of hole LM -26-355 at 148.50 m showing disseminated native silver and in
millimeter-wide veinlets.
Discussion
Brixton’s exploration around the historic Shaft 6 area at Langis has outlined at least two zones of
silver mineralization: Shaft 6 South (S6 ‑S) and Shaft 6 Southeast (S6‑SE). The results in this news
release relate to both the S6‑S and S6‑SE zones (Table 1).
In the S6 -S zone, drilling continues to return high -grade intercepts, headlined by hole LM ‑26‑342,
which intersected 1.80 m of 1,329 g/t silver within 23.70 m of 206.6 g/t silver. These results build on
the ultra-high-grade silver mineralization previously reported in this year’s program (refer to the News
Release, March 25, 2026).
Similarly, t he latest results from hole LM -26-355 extend the high -grade silver mineralization
previously reported in the S6-SE area to the north (refer to News Release, May 11, 2026). Hole LM-
26-355 returned 4.95 m grading 492.8 g/t silver, including 1.00 m of 1,798 g/t silver. Unlike portions
of S6-S that are impacted by historic mine workings, S6-SE has limited mine workings and no known
historic stopes.
Mineralization in the Cobalt Camp and within the Langis property has mostly been observed in veins.
However, as shown in Figures 1 and 2, the results presented in this news release also indicate
disseminated silver mineralization in the S6-S and S6-SE areas. The combination of high- and ultra-
high-grade silver veins with disseminated silver is encouraging for the exploration program, as it
extends mineralization beyond the veins. In both the S6-S and S6-SE areas, silver mineralization is
primarily hosted along the unconformity between the Keewatin Basalts and the Huronian Sediments.
However, in the S6 -SE area, mineralization is also observed within the Keewatin Basalts and the
Nipissing Diabase (Figure 5). Follow-up drilling will focus on stepping out along strike to test
continuity of the high-grade silver intervals and refine structural controls.
Figure 3. Location map of drill holes within the Langis Project.
Figure 4. Detailed map of drill holes in this news release of the Shaft 6 area, historic stopes projected
to surface and A to A’ cross-section trace.
Table 1. Selected assay intervals from Langis Shaft 6 drill holes included in this news release.
All assay values are weighted averages. Reported intervals are drilling length, and the true width of
the mineralized intervals has not yet been determined . Reported intervals are length -weighted
composites calculated at a 5 g/t Ag cut-off over contiguous samples, with limited internal dilution. A
hole is reported as a significant intercept only where it contains a sub -interval exceeding 50 g/t Ag;
otherwise, it is shown as "No significant intercepts." Higher -grade "including" intervals reflect
geological interpretation.
Figure 5. A to A’ Cross Section Looking Northwest showing drill holes results from S6-S and S6-
SE. Cross-section trace in Figure 4.
Hole ID From To Interval Silver
meter meter meter g/t
LM-26-342 109.80 133.50 23.70 206.62
including 116.80 121.10 4.30 905.58
and including 117.80 119.60 1.80 1328.61
LM-26-343
LM-26-345
LM-26-346
LM-26-347 135.80 154.30 18.50 45.50
including 143.80 144.80 1.00 200.00
and including 149.30 151.30 2.00 259.50
LM-26-348 147.70 149.70 2.00 624.00
LM-26-349
LM-26-351 154.00 170.00 16.00 25.34
including 161.00 161.50 0.50 331.00
LM-26-351 219.45 224.00 4.55 29.37
including 220.45 220.95 0.50 84.60
LM-26-354
LM-26-355 146.05 151.00 4.95 492.76
including 147.00 149.00 2.00 977.25
and including 147.50 148.50 1.00 1797.50
No significant intercepts
No significant intercepts
No significant intercepts
No significant intercepts
No significant intercepts
This cross-section displays only segments of drill holes located 20 m away from the section .
Lithological contacts are interpretive. Historic drillhole assays are projected to a maximum of 20 m
from the section.
Figure 6. Drill results from the Langis Shaft 6 area, highlights from the 2026 campaign to date.
Table 2. Drill hole collar information for reported holes.
About the Langis Project
An exploration target for the project has been identified in the range of 1.0 million to 2.0
million tonnes grading 400 g/t to 800 g/t silver. Note: the potential quantity and grade of the
Exploration Target are conceptual. Insufficient exploration has been completed to define a mineral
resource and there is no certainty that further exploration will result in the target being delineated as
a mineral resource.
LM-26-342 PAD 15 607365 5270726 213.9 90 -47 201.0 S6-S
LM-26-343 PAD 15 607365 5270726 213.9 90 -43 131.0 S6-S
LM-26-345 PAD 15 607365 5270726 213.9 90 -50 210.0 S6-S
LM-26-346 PAD 15 607365 5270726 213.9 86 -46 210.0 S6-S
LM-26-347 PAD 12 607480 5270820 218.1 80 -65 255.0 S6-SE
LM-26-348 PAD 12 607480 5270820 218.1 90 -65 255.0 S6-SE
LM-26-349 PAD 12 607480 5270820 218.1 95 -65 249.0 S6-SE
LM-26-351 PAD 12 607480 5270820 218.1 98 -45 264.0 S6-SE
LM-26-354 PAD 11 607460 5270850 218.2 90 -50 264.0 S6-SE
LM-26-355 PAD 11 607460 5270850 218.2 90 -60 237.0 S6-SE
Dip Depth
(m) AreaHole ID Pad ID Easting
(m)
Northing
(m)
Elevation
(m) Azimuth