Brixton Metals Drills 6,199 g/t Silver over 1.00 m including 0.50 m of 12,386 g/t Silver in Hole 432 at its Langis Project in Ontario Hole 399: 4.60 m of 503 g/t Silver Hole 408: 7.00 m of 290 g/t Silver including 2.00 m of 958 g/t Silver
Brixton Metals Drills 6,199 g/t Silver over 1.00 m including 0.50 m of 12,386 g/t Silver
in Hole 432 at its Langis Project in Ontario
Hole 399: 4.60 m of 503 g/t Silver
Hole 408: 7.00 m of 290 g/t Silver including 2.00 m of 958 g/t Silver
VANCOUVER, Britis h Columbia, September 2, 2026 (GLOBE NEWSWIRE) - Brixton Metals
Corporation (TSX-V: BBB, OTCQ X: BBBXF) (the “Company” or “Brixton ”) is pleased to report
additional silver results from 33 holes at its wholly owned Langis Silver Project, located in the historic
silver mining camp of Cobalt, Ontario, Canada. The results reported herein extend mineralization
approximately 50 m to the south within the Shaft 6 South East (S6-SE) zone, where hole LM-26-399
returned 41.00 m of 79.2 g/t silver, and include encouraging initial results from the Shaft 6 West (S6-
W) area, where hole LM-26-401 returned 2.00 m of 447 g/t silver and mineralization is now confirmed
around the historic mine workings. In the Shaft 6 (S6) area, hole LM-26-432 returned 1.00 m of 6,199
g/t silver from 116.05 m depth, including 0.50 m of 12,386 g/t silver. So far in 2026, a total of 33,858
m has been completed across 155 d rill holes. Two rigs continue to operate at Langis, testing
extensions of known mineralization.
Highlights
• In the S6 area, hole LM-26-432 returned 1.00 m of 6,199 g/t silver from 116.05 m depth
o Including 0.50 m of 12,386 g/t silver from 116.05 m depth
• In the S6-SE area, hole LM-26-399 returned 41.00 m of 79.2 g/t silver from 208.00 m depth
o Including 4.60 m of 503 g/t silver from 213.35 m depth
• In the S6 area, hole LM-26-408 returned 7.00 m of 290 g/t silver from 123.00 m depth
o Including 2.00 m of 958 g/t silver from 126.00 m depth
• In the S6-SE area, hole LM-26-375 returned 5.00 m of 262 g/t silver from 182.00 m depth,
within 19.00 m of 78.9 g/t silver from 172.00 m depth
• In the S6-W area, hole LM-26-401 returned 2.00 m of 447 g/t silver from 111.00 m depth
o Including 0.50 m of 1,735 g/t silver from 111.00 m depth
Chairman and CEO, Gary R. Thompson, stated, “Drilling at Langis continues to show strong silver
results with hole LM-26-432 returning over 12 kilograms of silver per tonne. The disseminated native
silver flanking the veins in holes like 399 suggests the mineralized envelopes are wider than the
historic vein-only model implied. Our current strategy remains to expand known silver zones in and
around the historic mine workings.”
Figure 1. Langis Silver Project location map of drilling area.
Figure 2. Photograph of hole LM-26-432 at 116.36 m depth showing disseminated native silver and
native silver veins-veinlets.
Figure 3. Photograph of hole LM-26-432 at 116.36 m depth showing native silver veins-veinlets.
Figure 4. Photograph of hole LM-26-399 at 243.75 m depth showing disseminated native silver and
silver carbonate cobaltite veins.
Discussion
Shaft 6 South East (S6-SE)
New results from this recently discovered brownfield area (Table 1), with no mining works (see news
release dated, July 21, 2026), show the extension of mineralization to the south. Hole LM -26-399
was collared approximately 50 m south of previously reported hole LM-26-377. Both holes returned
silver mineralization over intervals of tens of metres, demonstrating continuity of the vein system
within the Shaft 6 South East (S6-SE) zone. As previously reported, hole LM-26-377 returned 20.00
m of 5,015 g/t silver from 165.00 m depth, including 14.00 m of 7,150 g/t silver, 1.15 m of 74,137 g/t
silver and 0.65 m of 89,125 g/t silver. Hole LM-26-399 returned 41.00 m of 79.2 g/t silver from 208.00
m depth, including 4.60 m of 503 g/t silver from 213.35 m depth, as well as 7.90 m of 94.7 g/t silver
from 241.10 m depth, including 0.55 m of 1,085 g/t silver from 243.15 m depth.
As observed in Figure 4 , disseminated native silver accompanies the vein- hosted mineralization.
Brixton interprets this as an upside to the traditional vein-focused exploration approach at Langis, as
the disseminated silver appears to create broad shoulders of mineralization flanking the veins, which
could significantly widen the mineralized envelopes and help expand a potential resource.
Shaft 6 West (S6-W)
Initial results from the Shaft 6 West (S6 -W) area, presented in Table 2 , are also encouraging and
indicate that mineralization extends around the historic mine workings in this zone.
Hole LM-26-401 is a good example, returning 2.00 m of 447 g/t silver from 111.00 m depth, including
0.50 m of 1,735 g/t silver. Silver mineralization at 111.0 0 m is observed disseminated and in
carbonate cobaltite veins. Brixton intends to continue drilling S6-W to expand mineralization, as the
Company has been doing in the Shaft 6 South (S6-S) and S6-SE areas.
Other areas
As shown in Table 3, Brixton continues to drill test additional targets in the surrounding Shaft 6, Shaft
6 North and Shaft 6 South areas. Highlights include hole LM-26-432, which returned 1.00 m of 6,199
g/t silver from 116.05 m depth, including 0.50 m of 12,386 g/t silver from 116.05 m depth (Figures 2
and 3), hole LM-26-408, which returned 7.00 m of 290 g/t silver from 123.00 m depth, including 2.00
m of 958 g/t silver from 126.00 m depth, hole LM-26-394, which returned 2.00 m of 236 g/t silver
from 122.00 m depth, and hole LM-26-382, which returned 0.90 m of 710 g/t silver from 131.00 m
depth. This reflects the Company’s dual exploration strategy at Langis: to expand known mineralized
zones while also testing prospective ground for new discoveries.
Figure 5. Plan Map of Langis showing the drill hole collars and traces reported in this news release,
along with 2026 drill collars, historic and Brixton assay results projected to surface, and the historic
tailings outline.
Table 1. Selected assay intervals from drill holes in the Shaft 6 South East Area (S6-SE).
Hole ID From (m) To (m) Length (m) Ag (g/t)
LM-26-371 230.00 237.00 7.00 108.13
including 235.00 236.00 1.00 693.00
LM-26-375 172.00 191.00 19.00 78.90
including 182.00 187.00 5.00 262.28
LM-26-379 153.00 163.90 10.90 32.87
including 154.85 157.00 2.15 122.49
LM-26-385 174.00 195.65 21.65 35.61
including 176.00 177.00 1.00 153.00
including 180.00 180.50 0.50 99.00
including 183.30 185.00 1.70 57.60
including 186.10 187.60 1.50 96.00
217.80 229.90 12.10 80.14
including 222.00 224.00 2.00 50.80
including 228.00 229.90 1.90 410.00
LM-26-393 162.00 179.00 17.00 51.13
including 167.00 169.00 2.00 332.00
LM-26-395 166.00 168.00 2.00 77.60
184.00 190.00 6.00 121.02
including 186.00 187.42 1.42 374.00
including 188.00 190.00 2.00 83.00
205.00 208.00 3.00 73.68
including 205.00 206.80 1.80 117.00
226.00 228.00 2.00 603.00
LM-26-399 208.00 249.00 41.00 79.22
including 211.00 212.00 1.00 106.00
including 213.35 217.95 4.60 502.63
including 241.10 249.00 7.90 94.73
and including 243.15 243.70 0.55 1,085.00
LM-26-403 225.00 227.00 2.00 80.00
LM-26-407 251.00 258.25 7.25 122.64
including 251.00 253.00 2.00 410.00
Note for all assay tables: All assay values are weighted averages. Reported intervals are drilling
lengths, and the true widths of the mineralized intervals have not yet been determined. Reported
intervals are length-weighted composites calculated at a 5 g/t Ag cut -off over contiguous samples,
with limited internal dilution. A hole is reported as a significant intercept only where it contains a sub-
interval exceeding 50 g/t Ag; otherwise, it is reported as no significant intercepts. Higher -grade
"including" intervals reflect geological interpretation.
Table 2. Selected assay intervals from drill holes in the Shaft 6 West Area (S6-W).
Hole ID From (m) To (m) Length (m) Ag (g/t)
LM-26-398 114.00 116.00 2.00 309.00
LM-26-401 111.00 113.00 2.00 447.06
including 111.00 111.50 0.50 1,735.00
LM-26-402 109.00 110.00 1.00 65.50
Table 3. Selected assay intervals from drill holes in the Shaft 6 , Shaft 6 North and Shaft 6 South
areas.
Hole ID From (m) To (m) Length (m) Ag (g/t)
LM-26-382 131.00 131.90 0.90 710.00
LM-26-394 122.00 124.00 2.00 236.00
132.00 143.00 11.00 6.81
including 141.50 142.00 0.50 55.40
LM-26-408 123.00 130.00 7.00 290.34
including 126.00 128.00 2.00 957.50
and including 126.00 127.00 1.00 1,480.00
LM-26-432 116.05 117.05 1.00 6,198.9
including 116.05 116.55 0.50 12,386.0
The following holes are reported as no significant intercepts: LM-26-374, 378, 381, 383, 384, 386,
387, 388, 390, 391, 392, 396, 400, 404, 405 and 406.