Brixton Metals Drills 28.35m of 1.63 g/t of Gold, 76.79 g/t Silver, 0.61% Copper and 1002 g/t Antimony at the Northside Vein, Camp Creek Area Including 8.77m of 2.52 g/t Gold, 120.87 g/t Silver, 1.22% Copper and 1481 g/t Antimony
Brixton Metals Drills 28.35m of 1.63 g/t of Gold, 76.79 g/t Silver, 0.61% Copper
and 1002 g/t Antimony at the Northside Vein, Camp Creek Area
Including 8.77m of 2.52 g/t Gold, 120.87 g/t Silver, 1.22% Copper and 1481 g/t Antimony
VANCOUVER, British Columbia, Aug. 19, 2025 -- Brixton Metals Corporation (TSX-V: BBB, OTCQB: BBBXF) (the
“Company” or “Brixton”) is pleased to announce further drill results from its near surface program at Camp Creek area. These
2 holes are the balance of early 2025 season drilling in the Camp Creek area for a total of 2165m over 12 holes. Drilling
continues at the Trapper Gold Target with 3408m over 15 holes (assays pending) and 1025m over 2 holes at the Catalyst
Copper-Gold Porphyry Target (assays pending) to date.
Highlights from Camp Creek
• Shallow drilling was successful in extending gold-silver-copper-antimony mineralization in the Northside Vein to the
northeast for an estimated total strike of 800m where it remains open
• Hole THN25-325 returned 1.40m of 7.11 g/t gold, 262 g/t silver, 0.76% copper and 1840 g/t antimony from 114.10m
depth
• Hole THN25-325 returned 28.35m of 1.63 g/t gold, 76.79 g/t silver, 0.61% copper and 1002.41 g/t antimony from
158.65m depth
◦ Including 8.77m of 2.52 g/t gold, 120.87 g/t silver, 1.22% copper
and 1481.78 g/t antimony from 167.73m depth
Chairman, CEO, Gary R. Thompson stated, “Shallow drilling in Camp Creek continues to deliver strong assay results. Based
on these new high-grade results and the fact that the Northside Vein and Glenfiddich Zone remain open, more shallow drilling
in this area is warranted to firm up continuity and define the limits along strike and at depth of this near surface gold-silver-
copper-antimony mineralization . Our near-term goal is to complete enough drilling in this area to establish a resource
estimate.”
Figure 1. Camp Creek Plan Map 2025 Drill Collars and the Northside Vein Target.
Table 1. Select Assay Intervals in Hole THN25-325.
Hole From To Interval Gold Silver Copper Antimony
ID meter meter meter g/t g/t % g/t
THN25-325 114.10 115.50 1.40 7.11 262.00 0.76 1840.00
THN25-325 158.65 187.00 28.35 1.63 76.79 0.61 1002.41
including 167.73 176.5 8.77 2.52 120.87 1.22 1481.78
Assay values are weighted averages. Reported intervals are drilling length and the true width of the mineralized intervals has
not yet been determined.
Discussion
The objective of hole THN25-325 was to expand the northeast trending mineralization identified in previous drilling at the
Northside Vein. Meanwhile, hole THN25-326 was targeting Oban-like diatreme breccia under-cover to the northeast.
Holes THN25-325 and THN25-326 were collared from the same pad and drilled at an azimuth of 90 degrees and 46 degrees
with dips of -55 and -60 degrees and to depths of 307.00m and 214.00m, respectively. The collar was located 271m to the
northeast from hole THN25-318 (Figure 1).
Hole THN25-326 did not reach its target depth of 400m and returned no significant results.
The Northside Vein mineralization has a new strike length of ~800m and has been drilled sparsely along this strike. The zone
remains open along strike and at depth having estimated widths up to 20m. Mineralization consists of semi-massive quartz-
pyrite-sulphosalt breccia which is hosted within the PZ diorite porphyry unit, see Figures 2, 3, and 4. Further drilling is
recommended on this target.
Figure 2. HQ Size Core Photograph of pyrite-sulphosalt-quartz in THN25-325 at 114.50m.
Figure 3. HQ Size Core Photograph of Mineralization in Hole THN25-325 from 166.65m to 176.65m.
Figure 4. HQ Size Core Photograph of Mineralization in Hole THN25-325 from 176.65m to 185.80m.
Table 2. Collar Information for Holes THN25-325 and THN25-326.
Hole ID Easting (m) Northing (m) Elevation (m) Azimuth Dip Depth (m)
THN25-325 628291 6492429 873 89.88 -54.96 307.00
THN25-326 628291 6492429 873 46.48 -60.47 214.00
Quality Assurance & Quality Control
Quality assurance and quality control protocols for drill core sampling was developed by Brixton. Core samples were mostly
taken at 1.5m intervals. High-grade intervals were taken at 0.4 to 1m intervals. Blank, duplicate (lab pulp) and certified
reference materials were inserted at a combined rate of 15%. Core samples were cut in half, bagged, zip-tied and sent directly
to ALS Minerals preparation facility in Whitehorse, Yukon or Langley, British Columbia depending on available lab capacity.
ALS Minerals Laboratories is registered to ISO 9001:2008 and ISO 17025 accreditations for laboratory procedures. Samples
were analyzed at ALS Laboratory Facilities in North Vancouver, British Columbia for gold by fire assay with an atomic
absorption finish, whereas Ag, Pb, Cu and Zn and 48 additional elements were analyzed using four acid digestion with an ICP-
MS finish. Over limits for gold were analyzed using fire assay and gravimetric finish. The standards, certified reference
materials, were acquired from CDN Resource Laboratories Ltd., of Langley, British Columbia and the standards inserted varied
depending on the type and abundance of mineralization visually observed in the primary sample. Blank material used
consisted of non-mineralized siliceous landscaping rock. A copy of the QAQC protocols can be viewed at the Company’s
website.
Correction: In the Company’s news release dated July 22, 2025, drill hole THN25-315 from 92.50m depth was reported in
error as 0.38 g/t Au, 4.44 g/t Ag over 24.50m ; the correct result is 0.34 g/t Au, 4.61 g/t Ag over 27.50m.
Qualified Person (QP)
Ms. Madeline Berry, P.Geo., is a Project Geologist for the Company who is a qualified person as defined by National
Instrument 43-101. Ms. Berry has verified the referenced data and analytical results disclosed in this press release and has
approved the technical information presented herein.
About Brixton Metals Corporation
Brixton Metals is a Canadian exploration company focused on the advancement of its mining projects. Brixton wholly owns
four exploration projects: Brixton’s flagship Thorn copper-gold-silver-molybdenum Project, the Hog Heaven copper-silver-gold
Project in NW Montana, USA, which is optioned to Ivanhoe Electric Inc., the Langis-HudBay silver-cobalt-nickel Project in
Ontario and the Atlin Goldfields Project located in northwest BC which is optioned to Eldorado Gold Corporation. Brixton
Metals Corporation shares trade on the TSX-V under the ticker symbol BBB, and on the OTCQB under the ticker symbol
BBBXF. For more information about Brixton, please visit our website at www.brixtonmetals.com.
On Behalf of the Board of Directors
Mr. Gary R. Thompson, Chairman and CEO
For Investor Relations inquiries please contact: Mr. Michael Rapsch, Vice President Investor Relations. email:
[email protected] or call Tel: 604-630-9707
Follow us on:
LinkedIn | Twitter/X | Facebook | Instagram
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Information set forth in this news release may involve forward-looking statements under applicable securities laws. Forward-
looking statements are statements that relate to future, not past, events. In this context, forward-looking statements often
address expected future business and financial performance, and often contain words such as “anticipate”, “believe”, “plan”,
“estimate”, “expect”, and “intend”, statements that an action or event “may”, “might”, “could”, “should”, or “will” be taken or
occur, including statements that address potential quantity and/or grade of minerals, potential size and expansion of a
mineralized zone, proposed timing of exploration and development plans, or other similar expressions. All statements, other
than statements of historical fact included herein including, without limitation, statements regarding the use of proceeds. By
their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause
our actual results, performance or achievements, or other future events, to be materially different from any future results,
performance or achievements expressed or implied by such forward-looking statements. Such factors include, among others,
the following risks: the need for additional financing; operational risks associated with mineral exploration; fluctuations in
commodity prices; title matters; and the additional risks identified in the annual information form of the Company or other
reports and filings with the TSXV and applicable Canadian securities regulators. Forward-looking statements are made based
on management’s beliefs, estimates and opinions on the date that statements are made and the Company undertakes no
obligation to update forward-looking statements if these beliefs, estimates and opinions or other circumstances should
change, except as required by applicable securities laws. Investors are cautioned against attributing undue certainty to forward
-looking statements.
Links:
https://brixtonmetals.com/wp-content/uploads/2025/08/Figure-1_19Aug2025-scaled.png
https://brixtonmetals.com/wp-content/uploads/2025/08/Figure-2_19Aug2025-scaled.jpg
https://brixtonmetals.com/wp-content/uploads/2025/08/Figure-3_19Aug2025-scaled.jpg
https://brixtonmetals.com/wp-content/uploads/2025/08/Figure-4_19Aug2025-scaled.jpg